Abstract:Underwater vectored propulsion thruster is normally actuated by a step motor or a hydraulic system. The traditional actuators show an inherent shortcoming in energy consumption per volume, low space utilization and structure complexity. Shape memory alloy (SMA) based actuator is considered as a strong competitor to the traditional one, however high torque output and long movement distance to acquire high control accuracy and wide operating range still remain a big challenge. In this work, we developed an SMA-based underwater vectored thruster consisting of two motion rings and their rotary SMA actuators. Two SMA wires combined with supplementary rotation parts are utilized to drive the rotation of each motion ring. The rotary SMA actuator outputs torque that can change the angular position of underwater thruster, and the maximum angle and the response speed can be reached 38° and 1.6° s −1 . The experimental results verify the feasibility of applying the rotary actuator to underwater device. Modeling the SMA rotary actuator system helps understanding the rotary process of underwater vectored thruster. Based on the system model, a control scheme integrated with an anti-windup Proportion Integral Differential (PID) controller is proposed. Its performance is compared with that of the integrating angle feedback without an anti-windup block through the simulation method. With the proposed anti-windup PID controller, the results show that the overshoot can be eliminated and the steady error is decreased to 0.01% and 0.9% at 10° and 25° respectively, reflecting that the anti-windup PID controller significantly improves the system controlling performance.

Investigating the vibration characteristics of vector thrusters under complex inclination angle variations

Computational Fluid Dynamics Study of Autonomous Underwater Vehicle with Vectorial Thrusters

A Minimal Thrust Vectoring Rotor with Six Degree of Freedom: Design and Analysis

Dynamic Analysis and Vibration Control of Space Towing Tethered-combination

Kinematic analysis and advanced control of a vectored thruster based on 3RRUR parallel manipulator for micro-size AUVs

A Theoretical Dynamic Model to Study the Vibration Response Characteristics of an Axial Piston Pump

The Design and Application of a Vectored Thruster for a Negative Lift-Shaped AUV

Simulation and experimental validation ofan autonomous underwater vehicle equipped with multi-vectored thrusters

Design and control of a novel rotary shape memory alloy actuator for two degree of freedom underwater vectored thruster

Modeling and dynamic characteristics analysis on solid attitude control motor using pintle thrusters

Frequency-domain analyses on the aeroelastic characteristics of thrust-vectored system on airship

An Improved Analytical Model of a Thrust Stand with a Flexure Hinge Structure Considering Stiffness Drift and Rotation Center Offset

Dynamic characteristic of thrust-vectoring nozzle adjusting mechanism considering clearance of motion joint

A New VTOL Aircraft

Model Linearization and Stability Analysis of Thruster System Controlled by Proportional Pressure Reducing Valves

Modeling and analysis of the vibration characteristics of a new type of in-arm hydropneumatic suspension of a tracked vehicle

Adaptive Control for Compact Vector-Propelled ROVs in Underwater Detection: Enhancing Stability and Maneuverability.

Research on a Thrust Allocation Algorithm of Spacecraft in RVD

Unmanned Surface Vehicle Thruster Fault Diagnosis via Vibration Signal Wavelet Transform and Vision Transformer under Varying Rotational Speed Conditions

Sequential Quadratic Programming-Based Thrust Vector Control Allocation

Maneuverability analysis of thrust vectoring ducted propeller with deflector