Abstract:For many applications, such as electric vehicles and washing machines, flux-weakening control is required for permanent magnet synchronous machine (PMSM) drives to extend the operation speed range and maximize the power capability under the voltage and current constraints. Voltage magnitude feedback flux-weakening control is widely employed due to its advantages of simple and standard control structure, robustness against parameter variation, both linear and over modulation flux-weakening operation, and automatic flux-weakening operation. However, stability problems are prone to occur in the flux-weakening region since the PMSM drive will operate on the boundary of the voltage limit. In this thesis, based on a non-salient-pole PMSM, the factors that could cause stability problems in the flux-weakening region with voltage magnitude feedback flux-weakening control are investigated and the corresponding solutions are developed. Firstly, based on a d-axis current voltage feedback controller, an adaptive control parameter method is proposed for the PMSM machine without maximum torque per voltage (MTPV) region, which aims to ensure the stability in a wider speed range. Then, a current reference modifier (CRM) and a voltage limit reference modifier (VRM) are incorporated with the conventional voltage feedback controller in order to improve the stability in the over modulation region. As for the PMSM machine with MTPV region, an extra feedback controller is introduced with an MTPV penalty function. The MTPV penalty function is optimized in terms of its effect on the steady-state performance, the dynamic performance, and the stability in the MTPV region. Afterward, the MTPV controller is properly selected and designed. Furthermore, two flux-weakening control methods accounting for MTPV, i.e. dq-axis current based feedback flux-weakening control, and current amplitude and angle based feedback flux-weakening control, are developed and compared in terms of the stability. It shows that the two methods exhibit complimentary merits and demerits in different regions, and consequently, a hybrid feedback flux-weakening control is proposed to combine their synergies and overcome their demerits. As the feedback voltage ripples that origin from the non-ideal drive system can be amplified by a conventional speed PI controller, the oscillation may even occur if a good speed dynamics is required in the flux-weakening region. An adaptive fuzzy logic speed controller is proposed and implemented to reduce the feedback voltage ripples while maintaining good speed dynamics.

A novel flux-weakening control method based on single current regulator for permanent magnet synchronous motor

Comparative Study of Flux-Weakening Control Methods for Pmsm Drive over Wide Speed Range

A Sinusoidal Current Control Method for SPMSM Considering Uneven Demagnetization Fault

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Research on Voltage Decoupling Control of Vector Control for Permanent Magnet Synchronous Motor

Flux Weakening Control of PMSM Driven by Single-Phase to Three-Phase Matrix Converter

Torque and Flux Weakening Control with MTPV for Interior Permanent Magnet Synchronous Motor

Flux Adaptive Control for PMSM

Flux Weakening Control Of Interior Permanent Magnet Synchronous Machine To Improve Torque Performance

Deep Flux Weakening Control With Six-Step Overmodulation For A Segmented Interior Permanent Magnet Synchronous Motor

A V/Hz Based Maximum Torque Per Volt Control in Flux-Weakening Region for Interior Permanent Magnet Synchronous Motors

A new adaptive flux weakening method of PMSM

Novel Flux-weakening Control of Permanent Magnet Synchronous Machines with Particular Reference to Stability Issues

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

An I/f Control Method With Closed-loop Regulation of Current Vector for Surface Permanent Magnet Synchronous Motor Drives

Model predictive flux control for permanent magnet synchronous motor

Analysis and Optimization of Current Coupling Control in Flux-Weakening Region of PMSM

A Novel Complex Vector Decoupling Control Method of IPMSM with Fuzzy Strategy

Improved Flux-Weakening Control of IPMSMs Based on Torque Feedforward Technique

Novel deadbeat direct torque and flux control for interior permanent magnet synchronous motor

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control