Abstract:LiDAR-camera calibration is a precondition for many multi-sensor systems that fuse data from LiDAR and camera. However, the constraint from common field of view and the requirement for time synchronization make the calibration a challenging problem. In this paper, we propose a novel LiDAR-camera calibration method aiming to eliminate these two constraints. Specifically, we capture a scan of 3-D LiDAR when both the environment and the sensors are stationary, then move the camera to reconstruct the 3-D environment using the sequentially obtained images. Finally, we align 3-D visual points to the laser scan based on a tightly couple graph optimization method to calculate the extrinsic parameter between LiDAR and camera. Under this design, the configuration of these two sensors is free from the common field-of-view constraint due to the extended view from the moving camera. In addition, we also eliminate the requirement for time synchronization as we only use the single scan of laser data when the sensors are stationary. We theoretically derive the conditions of minimal observability for our method and prove that the accuracy of calibration is improved by collecting more observations from multiple scattered calibration targets. In addition, the proposed method is beneficial to not only plane measurement error-based calibration targets, such as chessboards, but also other point measurement error-based calibration targets, such as boxes and polygonal boards. We validate our method on both simulation and real-world data sets. Experiments show that our method achieves higher accuracy than other comparable methods, which is in accordance with our theoretical analysis.

A physical based underwater imaging model and camera calibration method

Method for spectral restoration of underwater images:theory and application

Underwater Camera Calibration Based on Double Refraction

Model-Based Restoration of Underwater Spectral Images Captured with Narrowband Filters

MedUCC: Medium-Driven Underwater Camera Calibration for Refractive 3-D Reconstruction

LiDAR-Camera Calibration under Arbitrary Configurations: Observability and Methods

Underwater Refractive Stereo Vision Measurement and Simulation Imaging Model Based on Optical Path

Model and calibration of underwater stereo vision based on the light field

A novel monocular calibration method for underwater vision measurement

A Precise Calibration Method for the Underwater Binocular Camera With Unknown Refractive Index

Spatiotemporal Decoupling Based LiDAR-Camera Calibration under Arbitrary Configurations.

Underwater Three-Dimensional Microscope for Marine Benthic Organism Monitoring

Visual Detection And Feature Recognition Of Underwater Target Using A Novel Model-Based Method

An Underwater Structured Light Vision Calibration Method Considering Unknown Refractive Index Based on Aquila Optimizer

A Calibration Tool for Refractive Underwater Vision

Analysis of the Influence of Refraction-Parameter Deviation on Underwater Stereo-Vision Measurement with Flat Refraction Interface

Calibration method for key refractive parameters of underwater binocular vision

An Extrinsic Calibration Method With Closed-Form Solution for Underwater Opti-Acoustic Imaging System

Binocular Structured Light 3-D Reconstruction System for Low-Light Underwater Environments: Design, Modeling, and Laser-Based Calibration

Underwater Optical 3-D Reconstruction of Photometric Stereo Considering Light Refraction and Attenuation

A dense stereo matching method based on optimized direction-information images for the real underwater measurement environment