Abstract:Extrusion-based 3D bioprinting of cell-laden hydrogels is a potential technology for regenerative medicine, which enables the fabrication of constructs with spatially defined cell distribution. However, the limited assessment of rheological behaviors of hydrogel before printing is still a major issue for the advancement of 3D bioprinting. In this work, we systematically investigated the rheological behaviors (i.e. viscosity, storage modulus (G'), and loss modulus (G")) of alginate/gelatin composite hydrogels first for 3D printing complex constructs. The rheological studies revealed that viscosity of alginate/gelatin hydrogels is temperature-dependent and shear thinning. Sol-gel transition (intersection of G' and G") study provided indication for printing temperature, which are in the range of 18.8 °C (H2/7.5) to 24.5 °C (H2/24.5). The alginate (2 wt%) /gelatin (15 wt%) composite hydrogel sample was chosen to print the constructs and subsequent bioprinting. Complex constructs (i.e. nose and ear) were obtained with high printing resolution (151 ± 13.04 μm) in a low temperature (4 °C) chamber and crosslinking with 2 wt% CaCl2 subsequently without extra supports. Human amniotic epithelial cells (AECs) showed superior potential to differentiate into epithelial cells, while Wharton's jelly derived mesenchymal stem cells (WJMSCs) showed a superior angiogenic potential and fibroblastic phenotype. For the in vitro study, AECs and WJMSCs as seed cells, encapsulated in alginate/gelatin composite hydrogels, were bioprinted to form biomimetic bilayered membranous construct. High cell viability (> 95%) were observed up to 6 days after printing. The presented 3D bioprinting of human AECs and WJMSCs-laden alginate/gelatin composite hydrogels provides promising potentials for future skin tissue engineering.

Removal‐Free and Multicellular Suspension Bath‐Based 3D Bioprinting

Projection-based 3D Bioprinting for Hydrogel Scaffold Manufacturing

3D bioprinting vascular networks in suspension baths

Infiltration from Suspension Systems Enables Effective Modulation of 3D Scaffold Properties in Suspension Bioprinting

Electro-Assisted Bioprinting of Low-Concentration GelMA Microdroplets

3D bioprinting of high-performance hydrogel with in-situ birth of stem cell spheroids

Bioprinting of Cell-Laden Microfiber: Can It Become a Standard Product?

Synchronous 3D Bioprinting of Large‐Scale Cell‐Laden Constructs with Nutrient Networks

Research on the Printability of Hydrogels in 3D Bioprinting.

Instant Gelation System As Self-Healable and Printable 3D Cell Culture Bioink Based on Dynamic Covalent Chemistry.

Gelatin-Based Hydrogels for Organ 3D Bioprinting

Gel-Based Suspension Medium Used in 3D Bioprinting for Constructing Tissue/Organ Analogs

3D printing of self‐standing and vascular supportive multimaterial hydrogel structures for organ engineering

3D Embedded Printing of Complex Biological Structures with Supporting Bath of Pluronic F-127

Digital light processing-based bioprinting of microtissue hydrogel arrays using dextran-induced aqueous emulsion ink

3D bioprinting and in vitro study of bilayered membranous construct with human cells-laden alginate/gelatin composite hydrogels.

3D Foaming Printing Biomimetic Hierarchically Macro-Micronanoporous Hydrogels for Enhancing Cell Growth and Proliferation.

Embedded 3D printing of dilute particle suspensions into dense complex tissue fibers using shear thinning xanthan baths

Granular Biphasic Colloidal Hydrogels for 3D Bioprinting

Three-dimensional (3D) bioprinting of medium toughened dipeptide hydrogel scaffolds with Hofmeister effect

3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels