Abstract:The development of energy storage technologies, such as rechargeable batteries, is crucial for the transition to a sustainable energy supply. Lithium-ion batteries are an effective means of energy storage, which is demonstrated by their wide application ranging from mobile phones to laptops and electric vehicles. Unfortunately, Li-ion batteries suffer from safety issues arising from their combustible organic electrolytes. All-solid-state batteries, in which the common liquid organic electrolyte is replaced by a solid-state electrolyte, could potentially lead to safer batteries with increased energy density. [1] Recently, metal hydrides (e.g. LiBH 4 and LiCB 11 H 12 ) have gained attention as promising solid electrolytes due to their electrochemical and thermal stability, low density and high ionic conductivity albeit at elevated temperatures. However, for successful incorporation of metal hydride electrolytes in all-solid-state batteries, sufficient ionic conductivity at room temperature is a prerequisite. Therefore, the development of strategies that enhance the room temperature conductivity in complex hydrides (10 -8 S cm -1 for LiBH 4 ) is of major importance. In this contribution, we combined two promising strategies to enhance ion mobility in metal hydrides, namely, partial ionic substitution [2] and nanoconfinement [3] , which led to highly conductive metal hydride-based nanocomposites (Figure 1). Specifically, via partial ion substitution with LiNH 2 , followed by nanoconfinement in a mesoporous oxide scaffold, LiBH 4 -LiNH 2 /metal oxide nanocomposites with conductivities reaching 5x10 -4 S cm -1 at 30 °C were obtained [4] , compared to 2x10 -8 S cm -1 for pure LiBH 4 . Interestingly, the conductivity of the LiBH 4 -LiNH 2 /metal oxide nanocomposites is strongly influenced by the chemical and physical nature of the mesoporous metal oxide. We systematically studied the influence of the scaffold properties on the conductivity of nanoconfined LiNH 2 -substituted LiBH 4 using mesoporous silica scaffolds (SBA-15) with varying surface chemistry and pore structure. The conductivity varied over three orders of magnitude when tuning both the porosity and surface chemistry of the metal oxide scaffold. [5] Our study reveals that the LiBH 4 -LiNH 2 /metal oxide conductivity is affected by the chemical nature of the scaffold, similar to LiBH 4 /metal oxide nanocomposites. A conductivity improvement of a factor of two is achieved by changing the SiO 2 (SBA-15) surface chemistry through alumination (Figure 2a). On the other hand, different from nanoconfined LiBH 4 , the conductivity of LiBH 4 -LiNH 2 /metal oxide nanocomposites is largely dictated by the pore structure of the scaffold, especially the pore volume (Figure 2b). Notably, the conductivity can be varied from 4x10 -7 S cm -1 to 5x10 -4 S cm -1 by increasing the scaffold pore volume from 0.51 to 1.00 cm 3 g -1 . Our work demonstrates that the origin of the conductivity enhancement in anion-substituted complex hydride-based nanocomposite electrolytes is different from other nanoconfined complex hydrides, e.g. LiBH 4 . In particular, for nanoconfined LiBH 4 -LiNH 2 , the conductivity improvement is attributed to stabilization of a highly conductive phase inside the scaffold pores, rather than the formation of a conductive interfacial layer at the hydride/oxide interface as observed for nanoconfined LiBH 4 . Thus, it is clear that the conductivity of metal hydride-based nanocomposite ion conductors is closely linked to the properties of scaffold material. The fundamental insights on the influence of scaffold properties on ion mobility in nanocomposite materials could be applicable to other cation- and anion substituted ion conductors as well. Thereby, this work provides useful insights for the design novel solid-state electrolytes with excellent ionic conductivity, crucial for the development of next generation batteries. References [1] Janek, Jürgen, and Zeier, Wolfgang G. "A solid future for battery development." Nature Energy 1.9 (2016): 1-4. [2] Maekawa, Hideki, et al. "Halide-stabilized LiBH4, a room-temperature lithium fast-ion conductor." Journal of the American Chemical Society 131.3 (2009): 894-895. [3] Blanchard, Didier, et al. "Nanoconfined LiBH4 as a fast lithium ion conductor." Advanced Functional Materials 25.2 (2015): 184-192 [4] Zettl, Roman, et al. "Combined Effects of Anion Substitution and Nanoconfinement on -Abstract Truncated-

Ionic conduction in ammonia functionalised closo-dodecaborates MB 12 H 11 NH 3 (M = Li and Na)

Non-Arrhenius Ionic Conductivity Behaviour in Antiperovskite Solid Electrolytes for Sodium Metal Batteries

Na3NH2B12H12 As High Performance Solid Electrolyte for All-Solid-state Na-ion Batteries

Fast Sodium-Ion Conduction in a Novel Conjuncto-Hydroborate of Na4B20H18

Fast Sodium-Ion Conduction in a Novel Conjuncto -Hydroborate of Na 4 B 20 H 18

(Digital Presentation) Nanoscaffold Porosity and Surface Chemistry Effects on Li-Ion Conductivity in Metal Hydride Nanocomposite Electrolytes

Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Hydrated Lithium nido-Boranes for Solid-Liquid Hybrid Batteries

Fast Ionic Migration from Bulk to Interface in the Li(NH3)xBH4@SiO2 Composite

Incorporation of Ammonia Borane Groups in the Lithium Borohydride Structure Enables Ultrafast Lithium Ion Conductivity at Room Temperature for Solid-State Batteries

Iodine-Substituted Lithium/Sodium closo -Decaborates: Syntheses, Characterization, and Solid-State Ionic Conductivity

Fast Ionic Migration from Bulk to Interface in the Li(NH 3 ) x BH 4 @SiO 2 Composite

Ammine Magnesium Borohydride Nanocomposites for All-Solid-State Magnesium Batteries

Facile Self‐Forming Superionic Conductors Based on Complex Borohydride Surface Oxidation

Computational Investigation of Halide Solid Electrolytes for Na-Based Batteries

Ammonium–Ammonia Complexes, N 2 H 7 + , in Ammonium closo -Borate Ammines: Synthesis, Structure, and Properties

Electrochemical Stability of Electrode/Electrolyte Interfaces in Metal Borohydride Solid Electrolytes

New Series of Ternary Metal Chloride Superionic Conductors for High Performance All-Solid-State Lithium Batteries

A Cyclic Durable All-Solid-state Battery Constructed with LiBH4-based Electrolyte with High Ionic Conductivity at Room Temperature

Evaluation of a new lithium complex hydride: A derivative of BH4- and NH2- for fast Li-ion conduction and H2 sorption

Reinvestigation of ionic conductivity of a layered Li(BH3NH2BH2NH2BH3) salt