Abstract:Polydimethylsiloxane (PDMS) is a soft, biocompatible polymer extensively employed in biomedical research, notable for its tunable mechanical properties achieved through cross-linking. While many studies have assessed the mechanical properties of PDMS utilizing macroscopic and microscopic methods, these analyses are often limited to freshly prepared samples. However, the mechanical properties of PDMS can be expected to change during prolonged exposure to water or air, such as interface polymer chain loosening or surface hardening, which are critical considerations in applications like cell culture platforms or microfluidic devices. This paper presents a comprehensive 10-day investigation of the evolution of PDMS surface mechanical properties through AFM-based nano-indentation. We focused on the most commonly utilized crosslinker-to-base ratios of PDMS, 1:10 (r10) and 1:20 (r20), under conditions of air and deionized water storage. For r10 samples, a hardening process was detected, peaking at 2.12 ± 0.35 MPa within five days for those stored in air and 1.71 ± 0.16 MPa by the third day for those immersed in water. During indentation, the samples displayed multiple contact points, suggesting the formation of distinct regions with varying mechanical properties. In contrast, r20 samples exhibited better stability, with an observed elastic modulus averaging 0.62 ± 0.06 MPa for air-stored and 0.74 ± 0.06 MPa for water-stored samples. Relaxation experiments, interpreted via the General Maxwell Model featuring two distinct component responses, a relatively consistent fast response τ1 (on the order of 10-1 s), and a more variable, slower response τ2 (on the order of 10 s), throughout the study period. The identification of two distinct relaxation times suggests the involvement of two disparate material property regimes in the relaxation process, implying changes in the surface material composition at the interface with air/water. These variations in mechanical properties could significantly influence the long-term functionality of PDMS in various biomedical applications.

How to establish the relationship between wetting parameters and the mechanical properties of a flexible thin film

A Systematic Method for Characterizing the Elastic Properties and Adhesion of a Thin Polymer Membrane

Experimental and Theoretical Study on Mechanical Properties of Porous PDMS

Dewetting of Polymer Films with Built-In Topographical Defects

Novel technique for mechanical characterization of thin polymeric tissue membrane

Friction behavior of rough polydimethylsiloxane surfaces under hydrophobic polymer aqueous solution conditions

Mechanical stretch for tunable wetting from topological PDMS film

A Novel Technique for Mechanical Characterization of Thin Elastomeric Membrane

Study of Elastic Modulus and Yield Strength of Polymer Thin Films Using Atomic Force Microscopy

Wetting on Silicone Surfaces

Structure–mechanical property relationships of 3D-printed porous polydimethylsiloxane films

Characterization of Irregularly Micro-Structured Surfaces Related to Their Wetting Properties

A Study on the 3D Deformation Behavior of Porous PDMS Flexible Electronic Composite Films Stretched under Different Temperatures

Experiment of droplet anisotropic wetting behavior on micro-grooved PDMS membranes

Modeling Dynamic Surface Tension on Surfactant-Enhanced Polydimethylsiloxane

Temporal evolution of mechanical properties in PDMS: A comparative study of elastic modulus and relaxation time for storage in air and aqueous environment

Water‐assisted Mechanical Testing of Polymeric Thin‐films

Flexible hydrogels connecting adhesion and wetting

A Combined Finite-Discrete Element Model for Elasto-Capillary Phenomena

Pickering Emulsion Approach for Fabrication of Waterborne Cross-Linkable Polydimethylsiloxane Coatings with High Mechanical Performance

Effect of Lateral Dimension on the Surface Wrinkling of a Thin Film on Compliant Substrate Induced by Differential Growth/swelling