Ming Ni,Hongjie Wang,Xudong Liu,Yilin Liao,Lin Fu,Qianqian Wu,Jiong Mu,Xiaoyan Chen,Jun Li
Abstract:Multi-rotor unmanned aerial vehicles (UAVs) for plant protection are widely used in China’s agricultural production. However, spray droplets often drift and distribute nonuniformly, thereby harming its utilization and the environment. A variable spray system is designed, discussed, and verified to solve this problem. The distribution characteristics of droplet deposition under different spray states (flight state, environment state, nozzle state) are obtained through computational fluid dynamics simulation. In the verification experiment, the wind velocity error of most sample points is less than 1 m/s, and the deposition ratio error is less than 10%, indicating that the simulation is reliable. A simulation data set is used to train support vector regression and back propagation neural network with multiple parameters. An optimal regression model with the root mean square error of 6.5% is selected. The UAV offset and nozzle flow of the variable spray system can be obtained in accordance with the current spray state by multi-sensor fusion and the predicted deposition distribution characteristics. The farmland experiment shows that the deposition volume error between the prediction and experiment is within 30%, thereby proving the effectiveness of the system. This article provides a reference for the improvement of UAV intelligent spray system.
engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
What problem does this paper attempt to address?
The problem that this paper attempts to solve is: **During the spraying process of multi - rotor agricultural plant protection drones, due to the drift of spray droplets and uneven distribution, the utilization rate of pesticides is low, environmental pollution is caused, and the ecological balance is affected**. To solve this problem, the author designed and verified a variable spraying system based on computational fluid dynamics (CFD) simulation and regression analysis.
Specifically, this research aims to establish the relationship between the flight state of the drone (such as propeller speed, pitch angle, flight altitude), environmental state (such as wind speed, environmental temperature, environmental humidity) and spraying state (such as nozzle flow rate, droplet diameter, distance between propeller and nozzle) and the deposition distribution characteristics of spray droplets (such as effective deposition radius, center offset distance). Through this relationship, a variable spraying system that can adjust the nozzle flow rate and control the drone offset is designed to improve the spraying effect and the utilization rate of pesticides.
### Main problem decomposition:
1. **Drift and uneven distribution of spray droplets**: During the spraying process of traditional plant protection drones, due to the influence of various factors, spray droplets are prone to drift and uneven spraying, thus reducing the utilization efficiency of pesticides.
2. **Environmental impact**: Environmental factors such as wind speed, temperature, and humidity will affect the deposition effect of spray droplets, and then affect the spraying effect.
3. **Insufficient intelligence of spraying system**: The existing spraying systems of plant protection drones cannot dynamically adjust spraying parameters according to the real - time environment and flight state, resulting in poor spraying effect.
### Solutions:
- **CFD simulation**: Through computational fluid dynamics simulation, the deposition distribution characteristics of droplets under different states are studied, and a large amount of simulation data is obtained.
- **Regression analysis**: Regression models such as support vector regression (SVM) and back - propagation neural network (BPNN) are used to establish the relationship between sensor states and deposition distribution characteristics, and predict the spraying effect in unknown states.
- **Multi - sensor fusion**: Combine the data of multiple sensors to adjust the nozzle flow rate and drone offset in real time to ensure the accuracy and uniformity of spraying.
Through these methods, the researchers designed an intelligent variable spraying system and verified its effectiveness through field experiments. The experimental results show that the prediction error of this system is within 30%, which proves its feasibility in practical applications.
### Formula summary:
- **Error calculation formula**:
\[
\text{error}=\left|\frac{F_{\text{simul}}-F_{\text{expri}}}{F_{\text{expri}}}\right|\times100\%
\]
where \(F_{\text{simul}}\) is the simulated value and \(F_{\text{expri}}\) is the experimental value.
- **Deposition amount calculation formula**:
\[
\beta_{\text{dep}}=\frac{\rho_{\text{sampl}}V_{\text{sampl}}}{\rho_{\text{spray}}A_{\text{col}}}
\]
where \(\beta_{\text{dep}}\) is the deposition amount (mL/cm²), \(\rho_{\text{sampl}}\) is the concentration of the solution washed off from the PET plate (\(\mu g/mL\)), \(V_{\text{sampl}}\) is the volume of the collected solution (mL), \(\rho_{\text{spray}}\) is the concentration of fluorescein B in the spraying solution (\(\mu g/mL\)), and \(A_{\text{col}}\) is the area of the PET plate used to collect droplets (cm²).