Abstract:Background The convectional strain-based algorithm has been widely utilized in clinical practice. It can only provide the information of relative information of tissue stiffness. However, the exact information of tissue stiffness should be valuable for clinical diagnosis and treatment. Methods In this study we propose a reconstruction strategy to recover the mechanical properties of the tissue. After the discrepancies between the biomechanical model and data are modeled as the process noise, and the biomechanical model constraint is transformed into a state space representation the reconstruction of elasticity can be accomplished through one filtering identification process, which is to recursively estimate the material properties and kinematic functions from ultrasound data according to the minimum mean square error (MMSE) criteria. In the implementation of this model-based algorithm, the linear isotropic elasticity is adopted as the biomechanical constraint. The estimation of kinematic functions (i.e., the full displacement and velocity field), and the distribution of Young’s modulus are computed simultaneously through an extended Kalman filter (EKF). Results In the following experiments the accuracy and robustness of this filtering framework is first evaluated on synthetic data in controlled conditions, and the performance of this framework is then evaluated in the real data collected from elastography phantom and patients using the ultrasound system. Quantitative analysis verifies that strain fields estimated by our filtering strategy are more closer to the ground truth. The distribution of Young’s modulus is also well estimated. Further, the effects of measurement noise and process noise have been investigated as well. Conclusions The advantage of this model-based algorithm over the conventional strain-based algorithm is its potential of providing the distribution of elasticity under a proper biomechanical model constraint. We address the model-data discrepancy and measurement noise by introducing process noise and measurement noise in our framework, and then the absolute values of Young’s modulus are estimated through the EFK in the MMSE sense. However, the initial conditions, and the mesh strategy will affect the performance, i.e., the convergence rate, and computational cost, etc.

Enhancing data-driven input reconstruction via optimized sensor balancing

Variational Mode Decomposition-Based Multirate Data-Fusion Framework for Estimating Structural Dynamic Displacement by Integrating Vision- and Acceleration-Based Measurements

Terminal Force Soft Sensing of Hydraulic Manipulator Based on the Parameter Identification

Multi-source uncertainty-oriented dynamic force reconstruction framework based on adaptive fitting precise integration and optimized wavelet denoising

Reconstruction of elasticity: a stochastic model-based approach in ultrasound elastography

A Hybrid Data-driven Soft Sensor Framework for Torque Estimation

Improving the Force Reconstruction Performance of Vision-Based Tactile Sensors by Optimizing the Elastic Body

Data-Driven Sensor Selection for Signal Estimation of Vertical Wheel Forces in Vehicles

Input-state-parameter-noise identification and virtual sensing in dynamical systems: A Bayesian expectation-maximization (BEM) perspective

Six-Axis Force Torque Sensor Model-Based In Situ Calibration Method and Its Impact in Floating-Based Robot Dynamic Performance

AI-Driven Virtual Sensors for Real-Time Dynamic Analysis of Mechanisms: A Feasibility Study

Sensorless Human-Robot Interaction: Real-Time Estimation of Co-Grasped Object Mass and Human Wrench for Compliant Interaction

Signal-based online acceleration and strain data fusion using B-splines and Kalman filter for full-field dynamic displacement estimation

Reconstruction of Unsteady Lift Force Measurements Using Non-Dimensional Scaling Optimization

Evaluation, Selection and Validation of Force Reconstruction Models for Vision-Based Tactile Sensors

Automated Continuous Force-Torque Sensor Bias Estimation

Fast Payload Calibration for Sensorless Contact Estimation Using Model Pre-training

Physics-aware tuning of the unscented Kalman filter: statistical framework for solving inverse problems involving nonlinear dynamical systems and missing data

Force Identification Based on the Reconstruction of Distributed Response with an Optimized Sensor Placement

In Situ Calibration of Six-Axis Force–Torque Sensors for Industrial Robots with Tilting Base

Robust Learning of Tactile Force Estimation through Robot Interaction