Abstract:The global increase in population and rapid urbanization has been followed by a growing generation of municipal solid wastes and construction and demolition sector wastes. This has put increasing pressure on countries around the world to come up with sustainable ways to deal with issues related to waste generation, climate change, and social and environmental degradation. This paper investigates a novel means of co-utilization of municipal solid wastes (MSW) with gypsum wastes from the construction and demolition sector for energy recovery and materials recycling and explores synergistic improvement in their processed value. We investigated high-temperature pyrolysis and gasification under different gasifying environments of inert (N 2 ), 10 % O 2 , 20 % CO 2 , and 70 % H 2 O at two different temperatures of 800 and 900 °C, in a semi-batch fixed bed reactor. Syngas obtained was analyzed for its composition and yield, while the solid residue obtained was analyzed for the crystalline phases of the inorganic content using powder-XRD (X-ray diffraction) diagnostics. These analyses revealed that increasing temperature as well as the addition of gypsum can significantly improve the carbon conversion and overall product gas yields. When comparing the gasifying environments, steam gasification provided increased syngas mass yields by up to 184 %, 425 % and 377 % respectively, as compared to CO 2 gasification, O 2 gasification, and pyrolysis environments. Adding gypsum at equal mass proportions (1:1) to MSW pyrolysis at 900 °C increased the syngas yield by 10 % compared to the non-catalytic case, while adding it at 800 °C reduced syngas yield by 6 % compared to the non-catalyzed pyrolytic case at 800 °C. Adding gypsum during O 2 gasification increased the syngas yield by 25 % compared to the non-catalytic cases at 900 °C and increased by 12.5 % at 800 °C. However, the syngas yield was reduced by 84 % when gypsum was added at equal mass proportions (1:1) to steam gasification of MSW at 900 °C and 50 % for 800 °C. Adding gypsum to CO 2 gasification also reduced the cumulative yield of syngas for both temperatures under investigation. However, the syngas quality was improved with gypsum addition as the yields of hydrocarbon were reduced. The char/solid residue was found to contain significant portions of CaS suggesting sulfur fixation capability of this process into the ash which can improve the ash characteristics in terms of metal recovery along with the improved waste conversion.

Graphene Derived from Municipal Solid Waste

Graphene Derived from Municipal Solid Waste

Graphene environmental footprint greatly reduced when derived from biomass waste via flash Joule heating

Trash To Treasure: Converting Plastic Waste Into A Useful Graphene Foil

An Overview of Recycling Wastes into Graphene Derivatives Using Microwave Synthesis; Trends and Prospects

Synthesis of Geopolymers Using Municipal Solid Waste Incineration Fly Ash and Construction and Demolition Waste: Mechanical and Thermal Activation

Is pyrolysis technology an advisable choice for municipal solid waste treatment from a low carbon perspective?

Transforming Municipal Solid Waste into Construction Materials

Green synthesis of graphene for targeted recovery of silver from photovoltaic waste

Synthesising graphene from plastic waste and its use with asphalt

CH4 and CO2 Reductions from Methanol Production Using Municipal Solid Waste Gasification with Hydrogen Enhancement

Upcycling of Waste Plastic into Hybrid Carbon Nanomaterials

Gram-scale bottom-up flash graphene synthesis

Automated Laboratory Kilogram‐Scale Graphene Production from Coal

Energy and Emissions Benefits of Renewable Energy Derived from Municipal Solid Waste: Analysis of A Low Carbon Scenario in Malaysia

Distribution of gasification products and emission of heavy metals and dioxins from municipal solid waste at the low temperature pyrolysis stage

A Polyimide-Pyrolyzed Carbon Waste Approach For The Scalable And Controlled Electrochemical Preparation Of Size-Tunable Graphene

The use of industrial molasses waste in the performant synthesis of fewlayer graphene (and its Au/Ag nanoparticles nanocomposites): Photocatalytic and supercapacitance applications

Recycling municipal, agricultural and industrial waste into energy, fertilizers, food and construction materials, and economic feasibility: a review

Gasification of municipal solid wastes with gypsum wastes under different gasifying environments

Conversion of Biological Solid Waste to Graphene-Containing Biochar for Water Remediation: A Critical Review