Abstract:Thin-walled structures are widely used as crucial structural components for energy absorbing applications. To design lightweight thin-walled-involved composite structures with better mechanical performance remains an open issue. In this study, the X-shaped rib-reinforced foam-filled tubes were designed and tested under quasi-static axial compression. Two types of foams, i.e., the aluminum foam and the additively manufactured polylactide (PLA) foam were considered as lightweight fillers. The effects of foam block filling ratio (rib angle) and arrangement of different foam fillers on the axial crushing performance of the diagonally rib-reinforced foam block-filled tube were analyzed. Results indicated that tubes that were diagonally filled with PLA foam blocks possessed better energy absorption capacity, whereas the higher mean crushing strength was achieved by diagonally filling with two aluminum blocks. It also revealed that tubes filled with different foam blocks did not always show advantages over those filled with the same foams. Moreover, the diagonally aluminum foam blocks filled tubes with a large rib angle could induce the global buckling, whereas that with the rib angle of 120 degrees exhibited better mechanical properties in load consistency and specific energy absorption capacity. Numerical simulations were conducted to reveal the energy absorption enhancement mechanism of the tubes filled with varying combinations of the reinforced fillers. Results indicated that the interaction between the foam blocks and the reinforced rib contributed most to the increased energy absorption. Further, an analytical model for evaluating the crushing strength of the developed structure was proposed. The theoretical predictions are in good agreement with the experimental results. The idea of tailoring the fillers arrangement and assembling pattern would promote the development of optimal energy-absorbing thin-walled involved composite structures.

Crashworthy subfloor structure with shock absorbers using fixed-to-hinged transforming joints and inward-folding composite tube filled with foam

Crashworthy Subfloor Structure of Civil Aircraft Via Inclined Inward-Folding Composite Tubes

An Energy Absorber Based on Foam-Filled Composite Tubes and Simulation of Its Application to Crashworthy Seats

Crash Performance of Inward-Inverting Composite Tubes Filled with Foam: Experimentation and Simulation

Shock Absorber with Inward-Folding Composite Tube and Its Application in Legged Landing Gear

Energy-absorbing mechanism and crashworthiness performance of thin-walled tubes diagonally filled with rib-reinforced foam blocks under axial crushing

A novel aircraft energy absorption strut system with corrugated composite plate to improve crashworthiness

A Flexible, Reusable and Adjustable High-Performance Energy Absorption System Inspired by Interlocking Suture Structures

Crashworthiness study of aluminum foam-filled tubular lattice structures based on triply periodic minimal surface metamaterials under lateral crushing

Crashworthiness Study of a Newly Developed Civil Aircraft Fuselage Section with Auxiliary Fuel Tank Reinforced with Composite Foam

Axial crushing of self-lock multi-cell tubes with foam filler and tube envelope

Crashworthiness Design and Impact Tests of Aluminum Foam-Filled Crash Boxes

Dynamic cushion, quasi-static stab resistance, and acoustic absorption analyses of flexible multifunctional inter-/intra-bonded sandwich-structured composites

Axial Crushing and Energy Absorption Integrated Design of Modular Filled Double-Hat Beam Composite Structures

Effect of high-density structural foam on crashworthiness of vehicle front side-rail and its application

Crushing of Energy Absorption Connectors with Polyurethane Foam and Asymmetric Pleated Plates

Improvements in the lateral crushing behavior of syntactic foam‐filled glass fiber reinforced polymer tubes by the addition of straight and helical multiwalled carbon nanotubes

On the Crashworthiness Behaviour of Innovative Sandwich Shock Absorbers

The effect of stacking sequences on energy absorption in axial crushing of CFRP stanchions for the cargo floor structure of airplanes

Axial mechanical properties and robust optimization of foam-filled hierarchical structures

Crashworthiness Study of Multi-Tube Assemblies of Corrugated Spacer Tubes Based on the Height Difference Staggered Compensation Method