Abstract:In the state-of-the-art high-power self-humidifying proton exchange membrane fuel cell (PEMFC) systems for vehicles, the high potential and low water production at idle or low load conditions strongly cause corrosion and decay of key materials and thus reduce durability. Therefore, the control technology of system-level durability requires an innovative design. Cathode recirculation is beneficial in alleviating the above unfavorable factors from the perspective of regulating oxygen and vapor partial pressure. This paper presents a pioneering study on the dynamics and control of cathode recirculation in vehicle high-power self-humidifying PEMFC system under low load conditions. First, a control-oriented dynamic model of the vehicle PEMFC system with a cathode recirculation loop is developed and the steady-state and dynamic performance is verified with experimental data from a 120 kW system. Active control of the intake component is achieved by re-feeding the reacted cathode gas to the air compressor outlet through a recirculation pump. On this basis, a high-potential controller based on oxygen partial pressure regulation is designed in combination with the dynamics of cathode recirculation. Results show that the designed dynamic fuzzy logic segmented proportional integral derivative controller with feedforward compensation achieves the optimal high-potential control effect by managing the oxygen partial pressure under variable low load conditions. It not only has excellent anti-disturbance ability but also effectively reduces the dynamic response time, transient overshoot, and steady-state error to satisfy the rapid and stable voltage output. Finally, the concomitant effect of humidification brought by the implementation of the optimal high-potential controller is analyzed, and the results show that the proton membrane is completely humidified.

Active disturbance rejection control strategy applied to cathode humidity control in PEMFC system

Improved 2-Order Active Disturbance Rejection Control for PMSM

A Closed-Loop Water Management Methodology for PEM Fuel Cell System Based on Impedance Information Feedback

A Nonlinear Active Disturbance Rejection Feedback Control Method for Proton Exchange Membrane Fuel Cell Air Supply Subsystems

Feedforward-decoupled closed-loop fuzzy proportion-integral-derivative control of air supply system of proton exchange membrane fuel cell

High-potential control for durability improvement of the vehicle fuel cell system based on oxygen partial pressure regulation under low-load conditions

An exhaust gas purging control algorithm based on fuzzy method for PEMFC

Analysis of the influence of cathode recirculation strategy on proton exchange membrane fuel cell from internal polarization and external characteristics perspectives

Cascade Control Method of Sliding Mode and PID for PEMFC Air Supply System

Model-based decoupling control for the thermal management system of proton exchange membrane fuel cells

Water management in a self-humidifying PEM fuel cell system by exhaust gas recirculation

Adaptive thermal control for PEMFC systems with guaranteed performance

Optimization of control strategy for air-cooled PEMFC based on in-situ observation of internal reaction state

Distribution Characteristics and Control Optimization of Anode and Cathode Water in Fuel Cells under Low Humidification

Comparison of Self-Humidification Effect on Polymer Electrolyte Membrane Fuel Cell with Anodic and Cathodic Exhaust Gas Recirculation

Robust control of internal states in a polymer electrolyte membrane fuel cell air-feed system by considering actuator properties

Numerical simulation and experimental study on the effect of cathode relative humidity on the performance of the PEMFC with dead-ended anode

A Novel Adaptive Model Predictive Control for Proton Exchange Membrane Fuel Cell in DC Microgrids

Modeling and Experimental Investigation of the Anode Inlet Relative Humidity Effect on a PEM Fuel Cell

Data-Driven Control for Proton Exchange Membrane Fuel Cells: Method and Application

Dynamic Performance of a High-Temperature PEM (proton Exchange Membrane) Fuel Cell – Modelling and Fuzzy Control of Purging Process