Abstract:Herein, an efficient, facile, scalable production of graphene dispersions via exfoliation of graphite in an environment-friendly PVA/H2O solvent system is reported. To warrant the impact of processing parameters on exfoliation efficiency, a systematic investigation is carried out using UV–visible spectroscopy. Under the optimal shearing parameters (1 h, 10 k rpm) with the PVA-to-fed graphite mass ratio of 10, a high concentration graphene dispersion (3.36 mg mL−1) is achieved. The estimated graphene yield is found to be 33% that further increases to 90% after sediment recycling. With the aim of detailed quality analysis, centrifugal cascading is adopted to predominately sort the graphene flakes from the upper end of the distribution. Through various characterization techniques, it is confirmed that the resulting dispersion comprises high-quality graphene flakes (1–5 layers) having thickness up to 1.48 nm, lateral dimension ranging from 0.3 to 4 µm, and quite a low level of defects (ID/IG = 0.1). The statistical distribution histogram reveals that most flakes are single-layer (41%), including some bi-layer (21%) and tri-layer (28%), while the remaining can be said five or multi-layer graphene. Meanwhile, the efficacy of the PVA/H2O solvent system is also demonstrated using ultrasonic exfoliation, providing a high concentration of graphene (1.1 mg mL−1) in a relatively short time (8 h). Furthermore, the applicability of the PVA-stabilized graphene dispersion is addressed by fabricating various graphene products such as graphene paper electrodes, graphene composites, and graphene thin films. Impressively, the graphene paper electrode imparts an exceptionally high specific capacitance of 199.63 F g−1 in a potential window range of 0 to 2 V, and hence could be a promising alternative to traditional electrodes in supercapacitors. Conclusively, the exfoliation of graphite in a green polymer–solvent system offers to produce highly concentrated graphene dispersions at a minimal cost that could be widely applicable in different research areas, thus holding the potential for commercial viability.

Fabrication of graphene from graphite using high-powered ultrasonic vibrators

Impact of Ultrasonic Probe Type, Frequency, and Static Pressure on Large-Scale Graphene Exfoliation

Effect of Static Pressure on Ultrasonic Liquid Phase Exfoliation of Few-Layer Graphene

Novel Cyclic Ultrasound-Assisted Liquid Phase Exfoliation of Graphene in Deionized Water: A Parameter Study

Liquid Phase Graphene Exfoliation with a Vibration-Based Acoustofluidic Effector

Quick and easy process for producing graphene material in liquid phase using high-power-density ultrasonication technique for preparing high microhardness nickel/graphene composite coating

Low-temperature Exfoliation of Multilayer-Graphene Material from FeCl3 and CH3NO2 Co-Intercalated Graphite Compound.

High yield of graphene by dispersant-free liquid exfoliation of mechanochemically delaminated graphite

Supercritical CO2-assisted microfluidization as ultra-high efficiency strategy for graphene preparation

Preparation of graphene by jet cavitation

Ultrahigh-throughput exfoliation of graphite into pristine 'single-layer' graphene using microwaves and molecularly engineered ionic liquids

High-concentration shear-exfoliated colloidal dispersion of surfactant–polymer-stabilized few-layer graphene sheets

Dual frequency ultrasonic liquid phase exfoliation method for the production of few layer graphene in green solvents

High-yield production of graphene flakes using a novel electrochemical/mechanical hybrid exfoliation

High-concentration graphene dispersions prepared via exfoliation of graphite in PVA/H2O green solvent system using high-shear forces

A new strategy for the efficient exfoliation of graphite into graphene

Nanomanufacturing of Graphene Nanosheets Through Nano-Hole Opening and Closing

Controlled Inertial Cavitation as a Route to High Yield Liquid Phase Exfoliation of Graphene

A comparative study for producing few-layer graphene sheets via electrochemical and microwave-assisted exfoliation from graphite powder

Environmentally Friendly Approaches Toward the Production of Processable Graphene by Exfoliation of Graphite Using Ionic Liquid

Mechanical exfoliation of graphite to graphene in polyvinylpyrrolidone aqueous solution