Abstract:This research contributes new analytical formulae for H ∞ optimal tuning of non-grounded tuned mass-damper-inerter (TMDI) for minimizing free-end displacement of base-excited cantilevered structures. The derivation relies on the fixed-point theory, making use of single-mode modelling of the cantilevered structure while accommodating arbitrary TMDI placement along the structural height. Optimal TMDI tuning parameters are derived for given dominant mode shape of structure and TMDI inertial properties (i.e., secondary mass and inertance) under two different types of harmonic excitations with frequency-independent displacement and acceleration amplitudes. The applicability of the derived TMDI tuning formulae for response mitigation of lightly damped cantilevered structures under stationary broadband support excitation is established through comparisons with numerically optimal TMDI properties for a wide range of TMDI inertial properties. Moreover, the analytical TMDI tuning formulae derived in this study achieve enhanced structural performance for base-excited structures compared to those from the literature, derived under various modelling assumptions and optimality criteria. Lastly, the potential of the proposed TMDI tuning for structural response mitigation is numerically evaluated by examining displacement, acceleration, and energy dissipation response history data of an experimentally identified reinforced concrete bridge pier model subjected to 100 earthquake ground motion (GM) records. Overall, reported results demonstrate that the derived analytical formulae can significantly extend the practical application of TMDI as a bona fide dynamic vibration absorber for base-excited structures by circumventing the need for computationally demanding numerical TMDI tuning optimization.

Bi-stability induced by motion limiting constraints on boring bar tuned mass dampers

Parameter Optimization of Time-Varying Stiffness Method for Chatter Suppression Based on Magnetorheological Fluid-Controlled Boring Bar

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

A nonlinear dynamics model of TBM with variable contact stiffnesses of the grippers and the hinges

Mitigation of Stick-Slip Vibrations in Drilling Systems with Tuned Top Boundary Parameters

Motion Analysis of Impact Oscillators with Symmetrical and Asymmetrical Rigid Constraints in Two-Parameter Bifurcation Plane

Oppositely Oriented Series Multiple Tuned Mass Dampers and Application on a Parallel Machine Tool

Optimal design of a novel tuned mass-damper–inerter (TMDI) passive vibration control configuration for stochastically support-excited structural systems

Steady-State Response and Damping Control Effect of Reid-TMD

Sensitivity Analysis of an Open TBM Gripping-Thrusting-regripping Mechanism Based on the Natural Characteristics

Understanding and exploiting the nonlinear behavior of tuned liquid dampers (TLDs) for structural vibration control by means of a nonlinear reduced-order model (ROM)

Coupled Axial-Torsional Dynamics in Rotary Drilling with State-Dependent Delay: Stability and Control

On 1/2 -DOF Active Dampers to Suppress Multistability Vibration of a 2 -DOF Rotor Model Subjected to Simultaneous Multiparametric and External Harmonic Excitations

H2 norm based parameter optimization of multiple tuned mass dampers for resonance suppression

Analytical design of non-grounded tuned mass-damper-inerter for base-excited structures

Regenerative Effects of Orthogonal Chip Dimensions on Turning Stability of Thin-Wall Workpiece-Tool Coupled Dynamics

Influence of Variable Damping Coefficient on Efficiency of TMD with Inerter

Analysis of Cutting Stability of a Composite Variable-Section Boring Bar with a Large Length-to-Diameter Ratio Considering Internal Damping

Dynamic characteristic analysis of TBM tunnelling in mixed-face conditions

Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures

Optimal Design of Tuned Mass Dampers With Variable Inerter and Damping