Abstract:<p>Semiactive hydraulic engine mounts (HEMs) offer better noise, vibration and harshness (NVH) performance in a wider frequency band than passive HEMs and provide acoustic and vibrational comfort for passenger cars that rivals that of active engine mounts (AEMs); these advantages lead to the wider use of HEMs than AEMs. In limited control modes, broadening the vibration isolation band as much as possible is the fundamental purpose of semiactive HEMs. This paper focuses on an analytical and experimental study of a unique semiactive HEM with four-chamber and three-fluid-channel whose lengths shorten successively while the cross-sectional areas increase successively. The semiactive HEM presents dynamic characteristics in a two-step style and thus can offer good NVH performance in a relatively wider band. The first step is induced by the resonance of the longest fluid channel, and the second step is induced by the resonance of the shortest fluid channel corresponding to a separate decoupling membrane (DM) fluid chamber. The relationship of bulk stiffness between the DM and the main rubber spring is switched from an in-series connection for the first step to an in-parallel connection for the second step, which is an intrinsic reason for effectively widening the vibration isolation band. To better clarify the two-step dynamics, the influence of the DM is further investigated by introducing frequency-dependent bulk stiffness in-series and in-parallel. Moreover, two additional HEMs and their experimental two-step dynamics are illustrated to validate the frequency-dependent bulk stiffness. The ideal control strategies for semiactive HEMs with four-chamber and three-fluid-channel are developed and numerically verified by minimizing the force transmissibility in a wider frequency band. The findings of this paper can facilitate the design of dynamics for HEMs with a DM. Proper matching and relationship switching of the bulk stiffness between the DM and the main rubber spring can effectively improve NVH performance for passenger cars.</p>

Architectural design and robust optimization of adaptive hydraulic engine mount

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Robust Equilibrium Optimization of Structural Dynamic Characteristics Considering Different Working Conditions

Optimal Design of the Hydraulic Engine Mount Based on GA

Anti-vibration Optimization of the Key Components in a Turbo-Generator Based on Heterogeneous Axiomatic Design

Non-linear Modeling and Experimental Study of a Streamlined Passive Hydraulic Mount

The Simulation and Optimization Design of Adams-Based Engine Suspension System

Robust Optimization of Structural Dynamic Characteristics Based on Adaptive Kriging Model and Cnsga

Experimental Analysis on Dynamic Characteristics and Model Modification of Hydraulic Engine Mounts

Improving Performance of a Resonant String-Based Pulsation Attenuator in Hydraulic Systems

Two-step dynamics of a semiactive hydraulic engine mount with four-chamber and three-fluid-channel

Research on the Optimal Design of Engine Mounts by Minimizing Transfer Power Based on Identifying Excitation and Admittance Matrix

Comparison of Dynamic Behaviours for Passive Hydraulic Engine Mount

Optimization and Robustness Analysis of Powertrain Mounting System

Evaluation For The Dynamic Characteristics Of The Hydraulic Engine Mount

The Dynamic Response of Direct-Decoupler Hydraulic Mount

Noise Analysis and Optimization Design of an Electric–Mechanical–Hydraulic Power Coupler for the Vehicle

Structure Analysis and Optimization Design of the Base of Four-pillar Hydraulic Testing Machine

Simulation of Energy Method of Decoupling of Engine Mounting Systems

Optimization of a commercial vehicle powertrain mounting system based on new rubber mounts

Robustness and performance evaluations for simulation-based control and component parameter optimization for a series hydraulic hybrid vehicle