Abstract:Technological developments have led to a significant increase in energy demand, and thus the interest in alternative energy has increased in the same direction. For this reason, fossil fuel reserves and climate-based renewable energy sources were used as alternatives in energy production, but the desired success was not fully achieved due to the decrease in fossil fuel and climate changes, and a new alternative energy source was sought. This situation has made Microbial Fuel Cells (MFC), which can directly convert chemical energy, an important alternative to renewable energy, from organic waste into electrical energy with the help of microorganisms. Therefore, in this study, microbially obtainable chondroitin, which is a non-toxic, biocompatible organic molecule that will not disrupt the ecological balance, sulfate-based proton exchange membrane was prepared for the microbial fuel cell. For this, Chondroitin was synthesized by the microbial method, chondroitin sulfate was obtained by sulfation, and chondroitin sulfate membranes were prepared by cross-linking with sulfosuccinic acid at varying molar concentrations (0.2, 0.4, 0.6, and 0.8). Firstly, the structural characterization, thermal properties, and morphological features of the prepared 20 mm thickness membranes were investigated, and then the effects of parameters such as pH change, voltage, quaternization, internal resistance, and coulomb efficiency on microbial fuel cell performance were studied. The best result was found to be that of chondroitin sulfate cross-linked with 0.8 M sulfosuccinic acid, which had an internal resistance of 0.310 Ω, a power density of 30 mW/m 2 , and a coulomb efficiency of 70 %. Additionally, proton conductivity was measured to be 0.9919 mS/cm, and thanks to the proton conduction efficiency of the designed Microbial chondroitin sulfate membranes, it has been determined that it has an effective proton exchange membrane potential. These developments show that microbial chondroitin sulfate-based membranes may be an alternative candidate for microbial fuel cells.

Effectiveness of Direct Sulfonated Polysulfone in Dual Chamber Microbial Fuel Cells Based Dewatered Sludge for Power Generation

Comparison of Sulfide Removal and Electricity Generation in Microbial Fuel Cells

Improving MFC efficiency in power generation and COD removal by using protic ionic liquid in MWCNT-CS-2-aminothiazole-SO 3 H nanoparticle-infused sulfonated PES

Development of a Novel Composite Polymer Electrolyte Membrane for Application as a Separator in a Dual Chamber Microbial Fuel Cell

Effect of Sulfonated Inorganic Additives Incorporated Hybrid Composite Polymer Membranes on Enhancing the Performance of Microbial Fuel Cells

Eco-friendly, low-cost, and antibacterial PEM boosts microbial fuel cell performance: Power generation and wastewater treatment

Development of microbial chondroitin sulfate-based proton exchange membranes for microbial fuel cells

Assessment of Power Generation from Dewatered Sludge using Membrane-Less Microbial Fuel Cell

Role of electrode and proton exchange membrane configurations on microbial fuel cell performance toward bioelectricity generation integrated wastewater treatment

Improved Simultaneous Decolorization and Power Generation in a Microbial Fuel Cell with the Sponge Anode Modified by Polyaniline and Chitosan

Exploring the potential of anti-bacterial and conductive ZnO–Al 2 O 3 /SPES proton exchange membrane applied in MFC for sustainable energy generation and sugar beet industry effluent treatment

Performance of a Dual-Chamber Microbial Fuel Cell Inoculated with Active Soil Microbes for Bioelectricity Generation

Performance evaluation of a dual-chamber plant microbial fuel cell developed for electricity generation and wastewater treatment

Evaluating the efficiency of a mixed culture biofilm for the treatment of black liquor and molasses in a mediator-less microbial fuel cell

Simultaneous enhancement of power generation and chlorophenol degradation in nonmodified microbial fuel cells using an electroactive biofilm carbon felt anode

Doped polymethyl methacrylate (PMMA) as proton exchange membrane for microbial fuel cell

Role and Important Properties of a Membrane with Its Recent Advancement in a Microbial Fuel Cell

Investigation and evaluation of membrane fouling in a microbial fuel cell-membrane bioreactor systems (MFC-MBR)

Co-substrate-Assisted Dimethyl Sulfide Degradation and Electricity Generation in a Microbial Fuel Cell

Recent Advances in the Development of Sustainable Composite Materials used as Membranes in Microbial Fuel Cells

Optimization of microbial fuel cell process using a novel consortium for aromatic hydrocarbon bioremediation and bioelectricity generation