Abstract:Surface subsidence induced by underground mining is one of the challenging problems in mining engineering, which can destroy ground surface buildings and cause huge economic losses to the mine. In this study, a two-dimensional numerical model, established by the discrete element method code PFC2D, was adopted to investigate the mechanical mechanism of surface subsidence and backfill material movement induced by underground mining in the Hongling lead-zinc mine. In the first simulation case, the ore body was excavated from the ground surface to the mining level 705 m by the sublevel caving mining method, and the stress evolution during the mining process was analyzed to reveal the mechanical mechanism of surface subsidence. In the second and third simulation cases, the mined-out areas above 905 m were backfilled by the noncemented tailings and an insulating pillar was reserved beneath the backfill material, and then the deep ore body was excavated by two different mining methods to study the movement law of the backfill material and rock strata induced by underground mining. The numerical simulation results show that when the sublevel caving mining method is adopted, underground mining can induce toppling failures in the hanging wall and lead to a large collapse pit in the ground surface. After the toppling failures in the hanging wall, the collapsed waste rock in the mined-out area can provide support force for the surrounding rock and restrict the further collapse of the hanging wall. Furthermore, when the cut-and-fill mining method is adopted for the excavation of deep ore body, the insulating pillar can restrict the horizontal displacement of surrounding rock and maintain the stability of the backfill material. The cut-and-fill mining method can efficiently control the surface subsidence and prevent the occurrence of collapse pit in the ground surface and is recommended for the Hongling lead-zinc mine to solve the surface subsidence problem.

Numerical analysis of building structures response under effect of continuous and stepped non-uniform settlement

Numerical Analysis of the Influence of Tunneling on Ground Movement and Adjacent Frame Structure

Finite Element Simulation of Shallow-Buried and Mining Tunnelling in Adjacent Frame Structures

Simulation of Mining-Induced Ground Damage Using Orthogonal Experiments to Determine Key Parameters of Super-Large Coalface: A Case Study in Shendong Coalfield in China

Study on Effect of Frame Structures Crossed by Shallow-Buried and Mining Tunnelling

Numerical Investigation on Instability of Buildings Caused by Adjacent Deep Excavation

Numerical Simulation of Shield Through the Masonry Structure at Different Angles

Study on the influence of construction of shallow-buried underground excavation tunnel on adjacent framework buildings

Numerical analysis of surface settlement induced by shield tunnel construction of adjacent structure

Numerical Simulation of Surface Subsidence and Backfill Material Movement Induced by Underground Mining

Validation of a numerical model based on dynamic centrifuge tests and studies on the earthquake damage mechanism of underground frame structures

Experimental and numerical investigation on seismic response of the soil-structure cluster interaction system

Structural Performance of Buildings Affected by Mining Activities: a Review

Numerical Modeling on the Seismic Responses of A Large Underground Structure in Soft Ground

Numerical stability assessment of a mining slope using the synthetic rock mass modeling approach and strength reduction technique

Numerical Study of Damage Potential in Buildings Due to Excavations

Responses of Buildings with Different Structural Types to Excavation-Induced Ground Settlements

Nonlinear study on the structure-soil-structure interaction of seismic response among high-rise buildings

Investigation of Small-Scaled Soil Structure Model under Earthquake Loads Via Small Shaking Table Tests

Analysis Of Tremors Effect On The Stability Of Excavation And Support System In Underground Coal Mining

Numerical Modeling of the Shaking Table Test of Soil-Structure Interaction System