Abstract:Considering the alarming frequency of coal mine gas disasters globally, there is an urgent need to develop efficient gas control technologies to ensure mining safety. This study focuses on the problem of high peak gas emission restriction in the process of coal roadway tunneling in outburst coal seams, taking the No. 15 outburst coal seam of the Pingshu Coal Mine as the research object. Based on coal sample testing analysis and the application of CO(2) gas fracturing (CO(2)-Frac) in coal mines,...
What problem does this paper attempt to address?
### Problems the paper attempts to solve
This paper aims to solve the problem of restricting high - peak - value gas emission during the tunneling process in high - gas - outburst coal seams. Specifically, the research object is the No. 15 outburst coal seam in Pingshu Coal Mine. By analyzing the coal sample test results and applying the carbon dioxide gas fracturing technology (CO2 - Frac), a comprehensive evaluation of the pore - fracture structure change and the uniform gas emission effect was carried out to provide a technical solution for the safe production of coal.
### Main research background and motivation
1. **Frequent occurrence of coal mine gas disasters worldwide**: Coal mine gas disasters occur frequently all over the world, and there is an urgent need to develop efficient gas control technologies to ensure mine safety.
2. **Challenges of high - gas - outburst coal seams**: With the increase of mining depth, the in - situ stress increases and the permeability decreases, resulting in a sharp increase in gas pressure and content, which seriously restricts the safety and production efficiency of coal mines.
3. **Limitations of existing technologies**: At present, in China's high - gas - outburst coal seams, technologies such as optimizing the ventilation system, increasing the air volume, and using pressure - relief boreholes are mainly adopted, but these technologies fail to fundamentally eliminate the high - gas - concentration phenomenon.
4. **Advantages of CO2 - Frac technology**: The CO2 - Frac technology can effectively improve the permeability of coal and rock, improve the gas extraction efficiency, and realize the uniform gas emission, thereby improving the production safety and efficiency of coal mines.
### Research methods and experimental design
1. **Sample collection and testing**: Coal samples were collected from the 15111 return airway in Pingshu Coal Mine and impact experiments were carried out using the CO2 - Frac experimental platform. The experimental equipment includes CO2 - Frac tubes, casings, fixers, safety cabins, and coal sample boxes.
2. **Experimental steps**: Put the coal sample into the coal sample box, assemble the CO2 - Frac tube and fill it with liquid CO2, insert the casing and adjust its position, seal it and push it into the safety cabin, connect the wires and start the CO2 - Frac tube, and finally take out the coal sample for observation and analysis.
3. **Data analysis**: Field - emission scanning electron microscopy (FESEM) and high - pressure mercury porosimeter (MIP) were used to analyze the microstructure and pore characteristics of the coal sample.
### Experimental results and discussion
1. **Changes in pore - fracture structure**:
- **Fracture propagation (FP)**: After the CO2 - Frac impact, the fractures in the coal sample significantly expanded and developed.
- **Three - winged fractures (TRW)**: The fractures expanded and connected with each other, forming three - winged fractures conducive to gas extraction.
- **Damage marks (DM)**: Craters - like damages appeared on the surface of the coal sample, and complex branched fractures were formed nearby.
- **Coal matrix fragmentation (CMF)**: Around the three - winged fractures, the coal matrix was fragmented and shallow fractures were formed, indicating the process of gas erosion and coal body damage.
2. **Changes in pore characteristic parameters**:
- **Pore volume and average diameter**: After 150MPa CO2 - Frac, the pore volume in the range of 100 - 10000 nm increased by 128% and the average diameter increased by 61%.
- **Specific surface area**: The specific surface area increased by 42%.
3. **Uniform gas emission test**:
- **Experimental layout**: A CO2 - Frac gas control experiment was carried out in the 15111 return airway. A total of three cycles were completed, and 11 extraction boreholes with a length of 70 meters were constructed in each cycle.
- **Experimental results**: After CO2 - Frac, the average gas concentration increased from 22% to 40%, the average daily gas extraction volume increased by 2.6 times, and the flow rate of a 100 - meter borehole increased by 7.1 times.
- **Gas concentration change**: In three consecutive tunneling cycles, the total tunneling length was 150 meters, and no gas over - limit phenomenon occurred. After CO2 - Frac, the maximum gas concentration decreased from 0.655% to 0.450%, and the variance value decreased from 0.0097 to 0.0031, with a decrease of 5%, 31% and 68% respectively.
### Conclusions
1. **CO2 - Frac generates macroscopic fracture structures**: FESEM images show that CO2 - Frac generates a large number of new fracture structures, such as fracture propagation, three - winged fractures, damage marks, and coal matrix fragmentation, which effectively changes the original structure of the coal seam and improves the permeability of the coal seam.
2. **Pore expansion effect of high - pressure CO2 - Frac**: After 150MPa CO2 - Frac, the pore volume and average diameter of the gas - permeable pores increased by 1...