Abstract:Structural Health Monitoring, Ahead of Print. The debonding between glass fiber-reinforced polymer (GFRP) rebars and concrete significantly reduces the bond strength and jeopardizes the safety and durability of GFRP-reinforced concrete (GFRP-RC) structures. As a result, it is imperative to monitor the structural integrity of infrastructures being built using these composite materials in structural elements during their service lives. Previous studies have primarily focused on artificially induced debonding scenarios for guided wave (GW)-based monitoring, which has resulted in an inability to capture debonding events that arise naturally due to external loads. Furthermore, flexural bond test investigations simulating real loading scenarios in GFRP-RC structures have not been linked with acoustic emission (AE) and GW monitoring. The present study addresses these research gaps by comprehensively examining the flexural bond integrity in GFRP-RC structural elements subjected to realistic loading conditions using a hybrid approach combining GW and AE as active and passive structural health monitoring techniques, respectively. A series of bond tests, conforming to RILEM specifications, have been performed to investigate various parameters (including rebar surface characteristics, embedment length, and confinement conditions) that affect the flexural bond degradation response of GFRP-RC members. Damage indices based on GW and AE signal parameters have been developed to evaluate the characteristics of confined and unconfined specimens distinctly. It has been observed from the test results that the L (0,3) GW mode is more sensitive to debonding than other modes and that a threshold of 25% has been established for the GW damage index to denote significant bond damage. Furthermore, AE damage indices have provided valuable insights into concrete damage, including splitting and damage at the rebar-concrete interface. Thus, a thorough understanding of bond deterioration in GFRP-RC structures has been developed by combining GW and AE health monitoring techniques, with implications for enhancing structural safety and durability.

Comprehensive analysis of bond stress transfer mechanisms in glass fiber-reinforced polymer-reinforced concrete beams using acoustic emission monitoring

Comprehensive assessment and monitoring of bond deterioration in GFRP-reinforced concrete beams using guided wave and acoustic emission techniques

Ultimate Strength of Reinforced Concrete Beams Retrofitted with Hybrid Bonded Fiber-Reinforced Polymer

Experimental Study on Dynamic Behavior of GFRP-to-concrete Interface

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Investigation of Bonding Behavior of FRP and Steel Bars in Self-Compacting Concrete Structures Using Acoustic Emission Method

Real-Time Monitoring of Bond Slip between GFRP Bar and Concrete Structure Using Piezoceramic Transducer-Enabled Active Sensing

Extraction and Analysis of Bond-Slip Characteristics in Deteriorated FRP-to-Concrete Joints Using a Mechanics-Based Approach

Debonding analysis of FRP-to-concrete interfaces between two adjacent cracks in plated beams under temperature variations

Investigation of Bond in Concrete Structures Strengthened with Near Surface Mounted Carbon Fiber Reinforced Polymer Strips

Acoustic Emission Monitoring of Concrete Columns and Beams Strengthened with Fiber Reinforced Polymer Sheets

Assessment of bond-slip behavior of hybrid fiber reinforced engineered cementitious composites (ECC) and deformed rebar via AE monitoring

Interfacial debonding detection in fiber-reinforced polymer rebar–reinforced concrete using electro-mechanical impedance technique

Experimental study on the fatigue bond behavior of concrete beams reinforced with hybrid fiber‐reinforced polymer and steel bars

Interfacial debonding detection in externally bonded bfrp reinforced concrete using stress wave-based sensing approach

Acoustic Emission (AE) based health monitoring of RC beams strengthened with mechanically anchored hybrid Fiber Reinforced Cementitious Matrix (FRCM) system

Experimental Research on Damping and Bonding Properties of Concrete Reinforced with GFRP Bars

Fiber Reinforced Polymer Debonding Failure Identification Using Smart Materials in Strengthened T-Shaped Reinforced Concrete Beams

Bond slip detection of shear interfaces for GFRP and UHPC composite members using piezoceramic smart aggregates

Identification of Bond-Slip Behavior of GFRP-ECC Using Smart Aggregate Transducers