Abstract:The utilization of wind energy has attracted extensive attentions in the last few decades around the world, providing a sustainable and clean source to generate electricity. It is a common phenomenon of wake interference among wind turbines and hence the optimization of wind farm layout is of great importance to improve the wind turbine yields. More specifically, the accuracy of the three-dimensional wake model is critical to the optiamal design of a real wind farm layout considering the combinatorial effect of wind turbine interaction and topography. In this paper, a novel learning-based three-dimensional wake model is proposed and subsequently validated by comparison to the high-fidelity wake simulation results. Moreover, due to the fact that the inevitable deviation of actual wind scenario from the anticipated one can greatly jeopardize the wind farm optimization outcome, the inaccuracy of wind condition prediction using the existing meteorologic data with limited-time measurement is incorporated into the optimization study. Different scenarios including short-, medium-, and long-term wind data are studied specifically with the wind speed/direction prediction errors of [Formula: see text] 0.25 m/s, [Formula: see text] 5.62 [Formula: see text], [Formula: see text] 0.08 m/s, [Formula: see text] 1.75 [Formula: see text] and [Formula: see text] 0.025 m/s, [Formula: see text] 0.56 [Formula: see text], respectively. An advanced objective function which simultaneously maximizes the power output and minimizes the power variance is employed for the optimization study. Through comparison, it is found that the optimized wind farm layout yields over 210 kW more total power output on average than the existed wind farm layout, which verifies the effectiveness of the wind farm layout optimization tool. The results show that as the measurement time for predicting the wind condition gets longer, the total wind farm power output average increases while the error of power output prediction decreases. For the wind farm with 20 wind turbines installed, the individual power output is above 500 kW with an error of 90 kW under the short-term wind [Formula: see text] 0.25 m/s, [Formula: see text] 5.62 [Formula: see text], while it is above 530 kW with an error of 10 kW under the long-term wind [Formula: see text] 0.025 m/s, [Formula: see text] 0.56 [Formula: see text].

Research on Evaluation Method of Wind Farm Wake Energy Efficiency Loss Based on SCADA Data Analysis

Wake Optimization Considering Fluctuating Limitations Caused byWind Speed Attenuation

Wind Farm Power Optimization Using System Identification

Multi-Objective Offshore Wind Farm Wake Redirection Optimization for Power Maximization and Load Reduction

Study on the wind-farm wake under neutral atmospheric condition

Experimental study on wake interactions and performance of the turbines with different rotor-diameters in adjacent area of large-scale wind farm

Computation and Analysis of an Offshore Wind Power Forecast: Towards a Better Assessment of Offshore Wind Power Plant Aerodynamics

Research on a Rapid Active Power Control Method for Wind Farms Based on Dynamic Operating Points

Study of aerodynamic performance and wake effects for offshore wind farm cluster

High resolution wind resource assessment method based on mesoscale atmospheric model and CFD technology

A data-driven analytical model for wind turbine wakes using machine learning method

A new three-dimensional wake model for the real wind farm layout optimization

Case Studies: Simulation on Characteristics of Wind Turbine Wake Effect in a Lake-Side Wind Farm with WRF-Fitch

A Monte Carlo simulation method for probabilistic evaluation of annual energy production of wind farm considering wind flow model and wake effect

Wind speed forecasting based on multi-objective grey wolf optimisation algorithm, weighted information criterion, and wind energy conversion system: A case study in Eastern China

Quantitative evaluation of yaw-misalignment and aerodynamic wake induced fatigue loads of offshore Wind turbines

Wind Power Curtailment Evaluation Based On Eof And Hierarchical Clustering Method

Wind Turbine Wake Regulation Method Coupling Actuator Model and Engineering Wake Model

Mesoscale Simulations of a Real Onshore Wind Power Base in Complex Terrain: Wake and Power Output

Research on the Power Capture and Wake Characteristics of a Wind Turbine Based on a Modified Actuator Line Model

Mesoscale Impact of the Sea Surface on the Performance of Offshore Wind Farms