Abstract:Thermal shrinkage has for long been a critical issue in nonwoven industrial applications. A dimensionally stable nonwoven web with excellent mechanical property was achieved by heat treatment with tension [taut annealed (TA)] instead of annealing under free state [free annealed (FA)], while the original high porosity was not affected. To better understand the fundamental structure-property relationship, these two different heat treatments' effects on the thermal behaviors, morphology, and phase structures of poly(phenylene sulfide) (PPS) nonwovens were elucidated via a combination of different experimental techniques such as temperature-modulated differential scanning calorimetry (DSC), two-dimensional wide-angle X-ray diffraction, two-dimensional small-angle X-ray scattering, and polarized Raman spectroscopy. It is evidenced that no obvious online stress-induced crystallization occurs during the melt-blowing process, making virgin PPS fibers mostly in the amorphous state. However, experimental results confirm that a certain amount of mesophase or constrained amorphous exists in the virgin PPS fibers without any presence of crystallites. After annealing, the DSC melting curves of both TA and FA PPS nonwovens exhibit endothermic annealing peaks, the origin of which is interpreted as the relaxation and devitrification of the rigid amorphous phase. However, the annealing peak position of the FA sample is always higher than that of the TA sample, which is reported for the first time. As compared with the FA sample annealed at the same temperature, TA PPS nonwovens reveal lower crystallinity and slightly larger lamellar long period (L-p) but a higher level of macroscopic fiber alignment and molecular chain orientation. These morphology and microstructure differences provide a good explanation for the superior mechanical property of TA PPS nonwovens with higher elastic modulus and tensile strength. The results are helpful in deepening the understanding of essential physical pictures of PPS nonwovens and promoting the development of the high-temperature nonwoven industry.

Annealing treatment on waterborne polyurethane film-forming and structural features induced heat conduction performance in conductive adhesive

Stabilizing the Wettability of Initiated Chemical Vapor Deposited (icvd) Polydivinylbenzene Thin Films by Thermal Annealing

Study on structure-induced heat transfer capabilities of waterborne polyurethane membranes

Research on Structural Features and Thermal Conductivity of Waterborne Polyurethane

Influence of annealing treatment on the structure and properties of poly(4-methyl-1-pentene)-based films and membranes

The Effect of High Temperature Annealing Process on Crystallization Process of Polypropylene, Mechanical Properties, and Surface Quality of Plastic Parts

Preparation and Properties of Phase‐change Heat‐storage UV Curable Polyurethane Acrylate Coating

Effects of Annealing Process on Crystallization and Low Temperature Resistance Properties of PP-R Composites

Effects of Annealing on Structure and Deformation Mechanism of Isotactic Polypropylene Film with Row‐nucleated Lamellar Structure

Heat-setting Effect on the Morphology and Phase Structures of PPS Nonwovens

Effect of annealing on phase structure and mechanical behaviors of polypropylene hard elastic films

Effect of Annealing on Microstructure and Mechanical Properties of Polypropylene Random Copolymer

Research for Waterborne Polyurethane/composites with Heat Transfer Performance: a Review

Probing Into the Annealing Effects on Microstructure and Mechanical Properties of Impact Polypropylene Copolymer With Nodular Crystalline Morphology

Impact of Thermal Annealing on the Dissolution of Semiconducting Polymer Thin Films

Simple-effective strategy for surface modification via annealing treatment polydopamine coating

Effects of Annealing on the Hierarchical Crystalline Structures and Mechanical Properties of Injection‐molded Bars of High‐density Polyethylene

Strength Enhancement of Polyurethane Film by Solution Annealing

Annealing Improves Tribological Property of Poly(octadecene-Alt-maleic Anhydride) Self-Assembled Film

Study on the Crystallization Behavior of Polyether Ether Ketone Thin Films Under Thermal Annealing

Effects of AAS/DMPA on Crystallinity of Films of Waterborne Polyurethane