Abstract:Magnetorheological dampers (MRDs) are intelligent devices for semi-active control and are widely applied in vibration isolation. A high-fidelity modeling method is necessary to take full advantage of the controllable properties of MRDs. Therefore, a nested long short-term memory (NLSTM)-convolutional neural network-efficient channel attention (NLCE) modeling method based on a dual-flow neural network architecture is proposed herein. It uses the time, current, amplitude, frequency, displacement, and velocity as inputs and the damping force as the output. Extensive sinusoidal excitation experiments were conducted using a materials test system and two datasets (large and small sample numbers) were obtained. Five testing sets with different emphases were obtained from different experimental series. Four evaluation indexes were used for a quantitative comparison. First, after training with the large sample dataset, network ablation and comparison experiments were conducted based on a testing set-1. The mean absolute relative error (MARE) evaluation index decreased by 2.290% relative to that of the NLSTM (baseline), indicating that the NLCE method is optimal for predicting the motion characteristics of MRDs. Furthermore, after training with the small sample dataset, comparison experiments were conducted based on testing set-1 and testing set-2. The MAREs decreased by 3.984% and 0.871% relative to that of the NLSTM (baseline), respectively, indicating that the NLCE is also the best modelling method for small sample dataset. The visualization results from the above experiments verified the abilities of the NLCE modeling method for small sample-adaptation, fighting randomness, and identifying similarities. Finally, based on testing set-3, testing set-4 and testing set-5, the NLCE model trained with small sample datasets has high prediction accuracy in predicting the peak damping force (MAREs = 1.456%, 0.880%, and 1.482%, respectively), indicating a high prediction accuracy in the non-hysteretic region. Combining all of the experimental results shows that the NLCE is an effective method for predicting the motion characteristics of MRDs.

Hybrid modeling of the nonlinear behaviors for magnetorheological energy absorber

Modeling and experimental evaluation of vibration reduction of hydraulic-driven joint with a MRF damper

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Integrated Dynamic Characteristics and Application in Semi-Active Dynamic Absorber of Magneto-Rheological Fluids

ANFIS with input space division for modeling magnetorheological energy absorber

Accurate Prediction of Magnetorheological Damper Characteristics Based on a New Rheological Constitutive Model

Impact behavior of a novel magnetorheological energy absorber based on wedge-shaped squeeze flow model

Modeling of magnetorheological dampers based on a dual-flow neural network with efficient channel attention

Adaptive Tuned Vibration Absorber Based on Magnetorheological Elastomers and Its Optimal Control

State observation–based control algorithm for dynamic vibration absorbing systems featuring magnetorheological elastomers: Principle and analysis

Adaptive magnetorheological fluid energy absorption systems: A review

Fast and accurate characterization of magnetorheological elastomers based on machine learning

The Simulation of Magnetorheological Elastomers Adaptive Tuned Dynamic Vibration Absorber for Automobile Engine Vibration Control

Hybrid controller of magnetorheological semi-active seat suspension system for both shock and vibration mitigation

A Nonlinear Dynamic Model of Magnetorheological Elastomers in Magnetic Fields Based on Fractional Viscoelasticity

Research On Modeling Of Magneto-Rheological Damping Dynamic Inverse Model Based On Support Vector Machine

Comparative Investigation of Phenomenological Modeling for Hysteresis Responses of Magnetorheological Elastomer Devices

Magnetorheological damper current estimation based on k-nearest neighbor algorithm

Advances in Modeling and Control of Magnetorheological Elastomers for Engineering Applications

A Variable Horizon Model Predictive Control for Magnetorheological Semi-Active Suspension with Air Springs

Magnetorheological dampers optimization based on surrogate model and experimental verification