Abstract:Real-time monitoring of the dynamic vibrations of beam-type structures indicates important implications in aerospace engineering applications, in which the additional sensing information about vibration parameters, including displacements, rotational angles, angular rates, as well as accelerations, facilitates the improvement of the system's safety. This article proposed a virtual sensing method with the usage of fiber Bragg grating (FBG) strain sensors to directly estimate the vibration parameters from the measured strains. The algebraic relationships of displacement–strain and rotation–strain on the sensor's installing points as well as the boundary points are obtained based on the Birkhoff interpolation method, and meanwhile, the explicit expressions on angular rates and accelerations are derived. Furthermore, a tracking differentiator is used to recover the strain signals and their first- and second-order derivatives from the noisy measurements in order to real-time estimate the angular rates and accelerations of the vibrating beam. Differing from the classical modal-based method, complex modal decomposition is not required in the proposed method. The comparison of numerical simulation results reveals that the proposed method has advantages over the modal-based method in accuracy and efficiency. Furthermore, the laboratory experiments indicate that the proposed method is effective for real-time estimating vibration parameters from the noisy measured strains.

Fiber Bragg Grating Accelerometer and Its Application to Measure Wheel‐Rail Excitation

An FBG-Based Sensor Tailor-Made for Wind Pressure Monitoring of High-Speed Trains

Design and test of a FBG acceleration sensor based on multi-stage flexible hinges

A fiber Bragg grating acceleration sensor based on a circular flexure hinge structure for medium- and high-frequency vibration measurements

A Medium-Frequency Fiber Bragg Grating Accelerometer Based on Flexible Hinges

Fiber Bragg Grating Accelerometer Based on Asymmetric Shaped Flexible Hinge Structure

A fiber Bragg grating vibration sensor based on crossed variable section beam

Design and analysis of high-frequency fiber Bragg grating vibration sensor

DYNAMIC BEHAVIOR OF THREE-SPAN CONTINOUS STONE ARCH BRIDGE MEASURED BY FIBER BRAGG GRATING (FBG) SENSORS

Dual straight-wing FBG accelerometer for low-frequency vibration measurement

Research on 3D FBG accelerometer and demodulation method

Fiber Bragg Grating Displacement Sensor with High Abrasion Resistance for a Steel Spring Floating Slab Damping Track

Rotating cantilever-based low-frequency double-fiber grating acceleration sensor

A High-Frequency Acceleration Sensor Based on Fiber Grating

Cascadable four-core fiber-Bragg gratings accelerometer for 2-dimension low-frequency vibration measurement

Broadband Flat Response High Sensitivity FBG Accelerometer Based on Multiresonance Structure

A Low-Frequency Fiber Bragg Grating Acceleration Sensor Based on Spring Support and Symmetric Compensation Structure with Flexible Hinges

Research on S-type fiber Bragg grating acceleration sensor for low-frequency vibration monitoring

Miniaturized fiber Bragg grating accelerator sensors for low-frequency vibration monitoring

FBG-based non-contact vibration measurement and experimental study

Real-Time Virtual Sensing for Dynamic Vibration of Flexible Structure via Fiber Bragg Grating Sensors