Abstract:Abstract The coal base electrodes and efficient coal base loaded cobalt electrodes (Co-CE) were prepared by pyrolysis method of low rank coal united activation method of KOH in order to develop more pores structures. The morphology of electrodes were characterized by Scanning electron microscopy, meanwhile, the type of elements were detected by energy dispersive spectroscopy (EDS). The electrochemical performance of electrodes were tested by cyclic voltammetry and electrochemical impedance spectroscopy. The lamella structures and pores were observed in microtopography of electrodes and the cobalt were successfully loaded in Co-CE from the EDS analysis. The operating conditions of processing time, current density, electrolyte concentration, pH and initial phenol concentration on this electrochemical system in single factor experiment were separately explored, correspondingly, the value was 180 min, 40 mA·cm −2 , 0.01 mol·L −1 , 2, 100 mg·L −1 , and the phenol removal rate ( R ) were at the range of 47.64–67.84%. In the optimization experiment of JMP design, the removal rate could reach at 83.47%. The response surface methodology was employed for optimizing operation conditions to improve R . And the prediction model obtained for the response can be represented as: R = 66.5275 + 6.7311 X 1 – 5.4197 X 4 – 5.2303 X 5 + 4.9555 X 1 2 – 12.5219 X 2 2 – 6.2912 X 4 2 + 16.0937 X 5 2 + 2.4109 X 2 X 4 – 7.910 X 3 X 4 – 3.0123 X 3 X 5 – 2.183 X 4 X 5 . The optimized conditions were pH 3, 100 mg·L −1 of phenol concentration, 0.1 mol/L of electrolyte concentration, 35 mA/cm 2 of current density, and 180 min of processing time. Meanwhile, the predicted R was 90.86%, the actual R of three parallel experiments were 91.2%, 89.3%, 91.05%, which were well consistent with the predicted value. Additionally, the degradation mechanism was proposed as that the adsorption in pore structures synergy electrocatalytic effect of Co-CE. Micro-electric fields formed in pores and the transition metal catalysis accelerated the transformation of cathode hydrogen peroxide to generate hydroxyl radical (·OH). Furthermore, the ·OH were produced both by cathode and anode which promoted the degradation of phenol. This high catalytic activity and low cost Co-CE is a kind of prospective electrode for electrochemical degradation of phenolic wastewater.

Oxygen vacancy-promoter on flotation residue carbon from coal gasification fine slag for the catalytic degradation of phenol

Promoted generation of singlet oxygen by oxygen vacancies-enriched Co3O4/g-C3N4 catalyst for efficient degradation of phenanthrene

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

In-situ preparation of coal gangue-based catalytic material for efficient peroxymonosulfate activation and phenol degradation

Synthesis of Oxygen Vacancy-Enriched N/P Co-Doped CoFe2O4 for High-Efficient Degradation of Organic Pollutant: Mechanistic Insight into Radical and Nonradical Evolution.

Surface-Modified Sewage Sludge-Derived Carbonaceous Catalyst as a Persulfate Activator for Phenol Degradation

Preparation of Mn-doped sludge biochar and its catalytic activity to persulfate for phenol removal

Iron containing sludge-derived carbon towards efficient peroxymonosulfate activation: Active site synergy, performance and alternation mechanism

In-situ synthesis of magnetic iron-chitosan-derived biochar as an efficient persulfate activator for phenol degradation

Carbon aerogel from forestry biomass as a peroxymonosulfate activator for organic contaminants degradation

Adsorption synergy electrocatalytic degradation of phenol by active oxygen-containing species generated in Co-coal based cathode and graphite anode

Oxygen vacancy mediated Ruddlesden-Popper Cu-based perovskites wih a dual-reaction-center for enhanced fenton-like removal of coal pyrolysis wastewater

Enhanced peroxymonosulfate activation by δ-MnO 2 nanocatalyst enriched with oxygen vacancies for phenolic pollutants polymerization

Iron oxychloride composite sludge-derived biochar for efficient activation of peroxymonosulfate to degrade organic pollutants in wastewater

Pyrolysis Temperature-Switchable Fe-N Sites in Pharmaceutical Sludge Biochar toward Peroxymonosulfate Activation for Efficient Pollutants Degradation

Low-cost Y-type zeolite/carbon porous composite from coal gasification fine slag and its application in the phenol removal from wastewater: fabrication, characterization, equilibrium, and kinetic studies

Synthesis of Fe-N doped porous carbon/silicate composites regulated by minerals in coal gasification fine slag for synergistic electrocatalytic treatment of phenolic wastewater

Nonradical activation of peroxymonosulfate via N-doped microporous carbon from hypercrosslinked polymers for phenol degradation

Synergistic enhancement of redox pairs and functional groups for the removal of phenolic organic pollutants by activated PMS using silica-composited biochar: Mechanism and environmental toxicity assessment

Peroxymonosulfate activation by iron-carbon composite derived from coal gasification slag for sulfamethoxazole removal: Performance evaluation and mechanism insight

Activation of Persulfate by CO2-activated Biochar for Improved Phenolic Pollutant Degradation: Performance and Mechanism