Abstract:Abstract Unexpected failure of mud pumps during drilling operations can result in non-productive time (NPT) and increase well construction cost. Several prior studies and implementations of condition-based maintenance (CBM) systems for mud pumps have failed to provide a generalized solution for the variety of pump types encountered in the field, in particular by failing to detect damage early enough to mitigate NPT. Our research is aimed at improving upon this situation by developing a practical, generally-applicable CBM system for mud pumps. In the study reported here, a laboratory test bed with a triplex mud pump was used to collect data to test a new approach to mud pump CBM. Artificial damage was introduced to the two most frequently replaced parts of the pump, i.e., the valve and piston. An accelerometer and an acoustic emission (AE) sensor were used to collect experimental data. Based on this data, an anomaly detection algorithm was constructed using a one-class support vector machine (OC-SVM) to pin-point the early onset of mud pump failure. The CBM methodology thus developed does not require prior knowledge (data) of the mud pump itself or of the failures of its components. This is key to it being more widely deployable. The trained machine-learning algorithm in the test setup provided an accuracy greater than 90% in detecting the damaged state of the valve and piston. Only the characterization of the normal (i.e., non-damaged) state data was required to train the model. This is a very important result, because it implies that the sensors can be deployed directly onto mud pumps in the field – and additionally, that the first few hours of operation are sufficient to benchmark normal operating conditions. Also, it was observed that a multi-sensor approach improved the accuracy of detection of both the valve and piston damage. The system is able to detect early-stage damage by combining the cumulative sum control chart (CUSUM) with the damage index developed in this project. This work is the first attempt at applying semi-supervised learning for CBM of mud pumps. The approach is applicable for field use with very little or no prior damage data, and in various working conditions. Additionally, the system can be universally deployed on any triplex pump and efficiently uses the data collected in the first few hours of operation as a baseline. Consequently, the practicality and scalability of the system are high. It is expected to enable the timely maintenance of critical rig equipment before catastrophic damage, failure and associated downtime occurs. The system has been deemed promising enough to be field-trialed, and is currently being trialed on rigs in North America.

A case study of GAMM (graphical analysis for maintenance management) in the mining industry

A Case Study of GAMM (Graphical Analysis for Maintenance Management) Applied to Water Pumps in a Sewage Treatment Plant, Chile

Implementation of Condition-based Maintenance Decision-making Model and System for Heavy-duty Gas Turbine

Text-mining building maintenance work orders for component fault frequency

Development and Usability Evaluation of VulcanH, a CMMS Prototype for Preventive and Predictive Maintenance of Mobile Mining Equipment

A fault prognosis strategy for an external gear pump using Machine Learning algorithms and synthetic data generation methods

Maintenance Strategies for Industrial Multi-Stage Machines: The Study of a Thermoforming Machine

Prognostics of Gas Turbine: A Condition-Based Maintenance Approach Based on Multi-Environmental Time Similarity

Finite time preventive maintenance optimization by using a Semi-Markov process with a degraded state. A case study for diesel engines in mining

A Novel Approach to Equipment Health Management Based on Auto-Regressive Hidden Semi-Markov Model (AR-HSMM)

Optimal Inspection and Preventive Maintenance Scheduling of Mining Equipment

Performance Evaluation of Underground Mining Machinery: A Case Study

Mining equipment diagnostics in a mine shaft dewatering system – case study

Reliability analysis of underground rock bolters using the renewal process, the non-homogeneous Poisson process and the Bayesian approach

Towards the Application of Process Mining in the Mining Industry—An LHD Maintenance Process Optimization Case Study

Towards a Practical, Generally-Applicable Condition-Based Maintenance CBM System for Mud Pumps

Fuzzy Risk-Based Maintenance Strategy with Safety Considerations for the Mining Industry

Methodology for data-driven predictive maintenance models design, development and implementation on manufacturing guided by domain knowledge

Combining Similarity Measures and Left-Right Hidden Markov Models for Prognostics of Items Subjected to Perfect and Imperfect Maintenance

A smart framework to perform a criticality analysis in industrial maintenance using combined MCDM methods and process mining techniques

Engineering and evaluating an unsupervised predictive maintenance solution: a cold-forming press case-study