Abstract:Exhaust gas recirculation (EGR) is being used widely to reduce and control the NOx emissions from internal combustion engines. However, the use of EGR leads to rise in soot emission and contamination of lubricating oil. Soot-contaminated lubricating oil has been shown to accelerate engine wear. At the same time, zinc dialkyldithiophosphate (ZDDP) which is widely used in lubricating oil as highly active extreme pressure and anti-wear additive may harmfully affect the internal combustion engine and its exhaust gas purifying installation. It is an important for the engine lubricating oil to look for new type lubricating oil additives without or low phosphorus. Rare-earth is the general name of 17 elements, including scandium, yttrium and lanthanide series. It is potential for the rare-earth compounds as new type and efficient lubricating oil additives because most of rare-earth compounds have hexagonal crystal layer structure. Current research results showed that the application prospects of some rare-earth compounds in the tribology field were extremely vast, such as oil, grease, water and coating lubrication systems etc. This chapter will mainly focus on the recent developments on the tribological behaviour of lubricating oils containing rare-earth elements, including the preparation and lubricating mechanism of rare-earth nanoparticles, surface modification for the rare-earth inorganic compound, rare-earth additives with potential application, synergistic effect of the rare-earth compounds and other additives, and the research tendency on the rare-earth lubricating additives, especially the influence of rare-earth elements on the tribological performance of carbon films and its friction-reduced catalyst function etc. which will be helpful to understand and develop the lubrication role of the rare-earth elements as additives in the lubricating oils.

Partially Oxidized Violet Phosphorus as an Excellent Lubricant Additive for Tribological Applications

Macroscale Superlubricity with High Pressure Enabled by Partially Oxidized Violet Phosphorus for Engineering Steel

Superlubricity induced by partially oxidized black phosphorus on engineering steel

Tribological Behaviour of Rare-Earth Lubricating Oils

Fabrication of Vanadium Oxide‐encapsulated Hybrid Carbon Nanospheres for Enhanced Tribological Performance

Oleic acid modified oxide graphene/triazine-based covalent-organic frameworks composite: Cooperation between heterostructure and electrical double layer to enhance tribological performances

An inorganic-organic hybrid CQDs@PVP lubricant additive: Achieving low friction and wear in PEG and water

Preparation of Diisooctyl Phosphate‐Modified Ultra‐Small Zinc Oxide Nanoparticle and Investigation of Its Tribological Properties as Additive in Alkylnaphthalene

Tribological Properties of Sulfur- and Phosphorus-Free Organic Molybdenum Compound As Additive in Oil

Tribological performance of fatty acid, acid/amine additive mixture and ionic liquid

Tribological Characteristics of Polyvinylpyrrolidone (pvp) As A Lubrication Additive for Artificial Knee Joint

Tribological Properties of Polydopamine-Modified Ag As Lubricant Oil Additives

2D black phosphorus dotted with silver nanoparticles: An excellent lubricant additive for tribological applications

Synergistic effects between sulfur- and phosphorus-free organic molybdenums and ZDDP as lubricating additives in PAO 6

The Tribological Mechanism of Cerium Oxide Nanoparticles as Lubricant Additive of Poly-Alpha Olefin

The impact of organic friction modifiers on engine oil tribofilms

Influence of structural factors on the tribological performance of organic friction modifiers

Voltage-Assisted Tribofilm Formation of Sulfur- and Phosphorus-Free Organic Molybdenum Additive on Bearing Steel Surfaces in Industrial Base Oils

Thiadiazole functionalized covalent organic frameworks as oil-based lubricant additives for anti-friction and anti-wear

Comparative tribological and friction behaviors of oil-lubricated manganese phosphate conversion coatings with different crystal sizes on AISI 52100 steel

Preparation and Tribological Study of Novel Amide-based Organic Friction Modifiers