Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

The influence of hybrid effect on mechanical properties and acoustic performance of hybrid fiber wet-laid felts

Glass/hot-meltable/aramid Fiber Wet-Laid Felts: the Influence of Manufacturing Treatment on Acoustics, Mechanical and Thermal Properties

Study on mechanical and thermomechanical properties of flax/glass fiber hybrid‐reinforced epoxy composites

Effect of Volume Ratio and Hybrid Mode on Low-Velocity Impact Properties of Unidirectional Flax/carbon Fiber Hybrid Reinforced Polymer Composites

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Tensile Properties Hybrid Effect of Unidirectional Flax/carbon Fiber Hybrid Reinforced Polymer Composites

Effect of fiber hybridization types on the mechanical properties of carbon/glass fiber reinforced polymer composite rod

Performance of Hybrid Fiber Reinforced Concrete with Steel Fibers and Polypropylene Fibers

Property Assessment of High-Performance Concrete Containing Three Types of Fibers

Effects of water absorption on the mechanical properties of hybrid natural fibre/phenol formaldehyde composites

Experimental Study on Hybrid Effect Evaluation of Fiber Reinforced Concrete Subjected to Drop Weight Impacts.

Effects of hybrid fibers on properties of desulfurized gypsum-based composite cementitious materials

Mechanical, Low-Velocity Impact, and Hydrothermal Aging Properties of Flax/carbon Hybrid Composite Plates

Effects of Surface Modification on Mechanical Properties and Electromagnetic Interference Shielding Properties of Carbon Fiber/silk Fiber Hybrid Composites

Impact Mechanical Properties of Concrete Reinforced with Hybrid Carbon Fibers

Electrical and Mechanical Characterization of Hybrid CFRP Sheets

Fiber Synergy of Polyvinyl Alcohol and Steel Fibers on the Bond Behavior of a Hybrid Fiber-Reinforced Cementitious Composite

Quasi‐static compression properties of fiber hybrid ceramic matrix composites with different hybrid ratios and fiber dispersions

Performance of Hybrid Composites Fabricated by Flax/Hemp Fibers Using Wire Mesh Plain Weaving Techniques

Effects of Wood Content and Modification on Properties of Wood Flour/Polybutylene Adipate Terephthalate Biocomposites

Effect of fiber hybridization on mechanical properties of concrete