Abstract:Herein, an effective strategy to improve the performance of InAs colloidal quantum dot (CQD) photodetectors through an optimized design of the absorber layer is proposed. Supported by optical simulations and solvent engineering, the thickness‐dependent performance is systematically studied, and an InAs CQD photodetector with an EQE of 79%, nua D* of 3.1 × 1011 Jones, and a response time of 46 ns are attained. Colloidal quantum dots (CQDs) with tunable bandgaps in the NIR‐SWIR range are highly valued for infrared applications including LiDAR, interactive displays, and biometrics. Particularly, for environmental considerations, photodetectors (PDs) using InAs CQDs are actively being explored. However, their performance still lags behind that of Pb‐based devices. Herein, an effective strategy to improve the photodetection characteristics of InAs CQD PDs by enhancing the incident photon usage is presented. By engineering the solvent of InAs CQD ink to increase volatility, the controllable range of absorber layer thickness is substantially extended. Then, the thickness‐ and bias‐dependent performance of InAs CQD PDs are systematically studied, guided by optical simulations. Under optimal conditions, an external quantum efficiency (EQE) of 79%, a responsivity of 0.6 AW−1–the highest reported for InAs CQD photodiodes, and a detectivity of 3.1 × 1011 Jones at 940 nm are achieved. Furthermore, it is found that increasing the absorber layer thickness reduces device capacitance, resulting in a faster response time of 46 ns. This study provides optical and electrical insights into how absorber layer thickness affects InAs CQD PD performance and outlines design principles for high‐performance optoelectronic devices with specified light‐absorbing layers, paving the way for the development of advanced optoelectronic devices.

Overcoming the EQE × Li-Fi Frequency Constraint by Modulating the PbS CQDs Distribution in Perovskite Film

Achieving High Responsivity and Detectivity in a Quantum-Dot-in-Perovskite Photodetector

Nano-Oxide-Assisted Si/PbS CQD Heterojunction Photodetectors for Broadband Sensing

Passivating {100} Facets of PbS Colloidal Quantum Dots via Perovskite Bridges for Sensitive and Stable Infrared Photodiodes

Organic Amine-Bridged Quasi-2D Perovskite/PbS Colloidal Quantum Dots Composites for High-Gain Near-Infrared Photodetectors

Ambient-Stable and High On/Off Ratio Near-Infrared Photodetector Based on Perovskite-Treated PbS Colloidal Quantum Dots

Electrode Engineering of Colloidal Quantum Dot Photodetectors Using a Self-Assembled Island-like LiF Interfacial Layer

Colloidal PbS Quantum Dot Photodiode Imager with Suppressed Dark Current

Interfacial Heterojunction Enables High Efficient PbS Quantum Dot Solar Cells

High Performance Infrared InAs Colloidal Quantum Dot Photodetector with 79% EQE Enabled by an Extended Absorber Layer

Optimization of Charge Carrier Extraction in Colloidal Quantum Dots Short‐Wave Infrared Photodiodes through Optical Engineering

Hybrid Interfacial Engineering: An Enabling Strategy for Highly Sensitive and Stable Perovskite Quantum Dots/Organic Heterojunction Phototransistors

High-performance flexible and broadband photodetectors based on PbS quantum dots/ZnO nanoparticles heterostructure

Engineering Perovskite Emissions via Optical Quasi-Bound-States-in-the-Continuum

Optical engineering of infrared PbS CQD photovoltaic cells for wireless optical power transfer systems

Interfacial passivation of CsPbI3 quantum dots improves the performance of hole-transport-layer-free perovskite photodetectors

Ions-induced Assembly of Perovskite Nanocomposites for Highly Efficient Light-Emitting Diodes with EQE Exceeding 30

26‐4: PbS Quantum Dot Photodetector for High Resolution and Low Light Night Vision of Phone Camera

High Luminance and Stability of Perovskite Quantum Dot Light-Emitting Diodes Via ZnBr2 Passivation and an Ultrathin Al2O3 Barrier with Improved Carrier Balance and Ion Diffusive Inhibition

High Performance and Stable All-Inorganic Metal Halide Perovskite-Based Photodetectors for Optical Communication Applications

Performance analysis of PQDCF-coated silicon image sensor using Monte-Carlo ray-trace simulation