Research on Critical Liquid-Carrying Model in Wellbore and Laboratory Experimental Verification

Wenqi Ke,Lintong Hou,Lisong Wang,Jun Niu,Jingyu Xu

DOI: https://doi.org/10.3390/pr9060923

IF: 3.5

2021-05-24

Processes

Abstract:Liquid loading in gas wells may slash production rates, shorten production life, or even stop production. In order to reveal the mechanism of liquid loading in gas wells and predict its critical flowrates, theoretical research and laboratory experiments were conducted in this work. A new model of liquid-film reversal was established based on Newton’s law of internal friction and gas–liquid two-phase force balance, with the critical reverse point obtained using the minimum gas–liquid interface shear force method. In this model, the influences of the pipe angle on the liquid film thickness were considered, and the friction coefficient of the gas–liquid interface was refined based on the experimental data. The results showed that the interfacial shear force increases by increasing the liquid superficial velocity, which leads first to an increase of the critical liquid-carrying gas velocity and then to a decrease, and the critical production also decreases. With 0° as the vertical position of the pipeline and an increase of the inclination angle, the critical liquid-carrying velocity first increases and then decreases, and the maximum liquid-carrying velocity appears in the range of 30–40°. In addition, the critical liquid-carrying gas velocity is positively correlated with the pipe diameter. Compared with the previous model, the model in this work performed better considering its prediction discrepancy with experiment data was less than 10%, which shows that the model can be used to calculate the critical liquid-carrying flow rate of gas wells. The outcome of this work provides better understanding of the liquid-loading mechanism. Furthermore, the prediction model proposed can provide guidance in field design to prevent liquid loading.

engineering, chemical

What problem does this paper attempt to address?

The paper primarily investigates the critical model of liquid carry in oil wells and validates it through laboratory experiments. In the production process of gas wells, the phenomenon of simultaneous production of gas and liquid often occurs due to water invasion or condensate oil dropout. Initially, the gas reservoir has sufficient energy, and the gas can carry the liquid to the surface. But as the gas reservoir depletes and the gas velocity decreases, it can no longer carry the liquid, leading to liquid accumulation in the wellbore, known as gas well liquid loading. Liquid loading increases bottom-hole pressure, reduces production, and even leads to premature shutdown.

To reveal the mechanism of gas well liquid loading and predict its critical flow rate, the authors conducted theoretical research and laboratory experiments. They established a new liquid film reversal model based on Newton's law of internal friction and the balance of two-phase forces, and determined the reversal point using the minimum gas-liquid interface shear force method. The model takes into account the influence of the pipe inclination angle on the liquid film thickness and improves the friction coefficient of the gas-liquid interface based on experimental data. The results show that an increase in liquid phase surface velocity leads to an initial increase and then decrease in the critical gas velocity of liquid carry, and the critical production rate decreases accordingly. When the pipe inclination angle increases from the vertical position, the critical gas velocity of liquid carry first increases and then decreases, with the maximum value occurring between 30° and 40°. Furthermore, the larger the pipe diameter, the higher the critical gas velocity of liquid carry.

Compared to existing models, the new model has a prediction error of less than 10%, demonstrating its accuracy in calculating the critical gas velocity of liquid carry in gas wells. This work deepens the understanding of liquid loading mechanisms and the proposed prediction model provides guidance for field design to prevent liquid loading.

In summary, the paper aims to address the following questions: how to understand and predict the phenomenon of liquid loading in gas wells, and how to establish an accurate model to calculate the critical conditions of liquid loading in order to optimize gas well production and drainage strategies.