Jianwei Chen,Zeyang Liu,Zixian Wang,Xiuxiu Zhang,Yi Zhang,Zhen Zhan,Xiaohua Gong,Tao Xu
Abstract:Abstract There are many instances of hollow-structure morphogenesis in the development of tissues. Thus, the fabrication of hollow structures in a simple, high-throughput and homogeneous manner with proper natural biomaterial combination is valuable for developmental studies and tissue engineering, while it is a significant challenge in biofabrication field. We present a novel method for the fabrication of a hollow cell module using a coaxial co-flow capillary microfluidic device. Sacrificial gelatin laden with cells in the inner layer and GelMa in the outer layer are used via a coaxial co-flow capillary microfluidic device to produce homogenous micro-beads. The overall and core sizes of core–shell microbeads were well controlled. When using human vein vascular endothelial cells to demonstrate how cells line the inner surface of core–shell beads, as the core liquifies, a hollow cell ball with asymmetric features is fabricated. After release from the GelMa shell, individual cell balls are obtained and deformed cell balls can self-recover. This platform paves way for complex hollow tissue modeling in vitro, and further modulation of matrix stiffness, curvature and biochemical composition to mimic in vivo microenvironments.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is how to efficiently and uniformly fabricate hollow cell balls to better simulate the development and function of tissues and organs in vivo. Specifically, the researchers have developed a new microfluidic technology for one - step preparation of core - shell microbeads with a liquid core and a GelMa shell, and through these microbeads, cells can self - assemble in vitro to form a hollow structure.
### Research Background and Problems
1. **Requirements for 3D Cell Culture**
- Traditional 2D cell culture methods cannot fully simulate the three - dimensional environment of cells in vivo, while 3D cell culture can better reproduce the morphology and behavior of cells.
- Closed 3D hollow structures (such as hollow spheres) are very common in developing tissues, such as blood vessels, eye lenses, kidneys, hearts, lungs, and inner ears. The function and morphogenesis of these structures are closely related to their internal and external biochemical gradients, curvatures, mechanical forces, and matrix components.
2. **Challenges of Existing Technologies**
- Currently, although there are some methods for fabricating 3D hollow structures, these methods usually require multi - step operations and are difficult to achieve high - throughput and uniformity.
- For example, when using the template method or microfluidic method to fabricate hydrogel microbeads, solid cell balls are often obtained, or the fabricated hollow structures are non - uniform.
### Solutions
To overcome these challenges, the researchers proposed a new coaxial co - flow capillary microfluidic platform, which achieved efficient and uniform fabrication of hollow cell balls through the following steps:
1. **Material Selection**
- Two naturally - derived biomaterials were used: gelatin as the core material and photocrosslinkable matrix hydrogel (GelMa) as the shell material. Both materials have good biocompatibility and cell adhesion.
2. **Microfluidic Device Design**
- A coaxial co - flow capillary microfluidic device was designed, in which the gelatin solution (containing cells) flows through the inner channel, the GelMa solution flows through the middle channel, and the oil phase as the continuous phase flows on the outer layer.
- By adjusting the temperature and photo - curing system, it is ensured that gelatin and GelMa form microbeads under appropriate conditions and are immediately cured at the outlet.
3. **Cell Self - Assembly**
- During the cultivation process at 37 °C, the gelatin core gradually liquefies, and cells migrate and proliferate along the inner surface of the GelMa shell, and finally form hollow cell balls.
- Human umbilical vein endothelial cells (HUVECs) were used in the experiment to verify the effectiveness of this method.
### Main Contributions
- **High Efficiency and Uniformity**: This method can achieve high - throughput and uniform preparation of hollow cell balls in a single step.
- **Biocompatibility**: The materials used (gelatin and GelMa) have good biocompatibility and cell adhesion, which are helpful for cell growth and function maintenance.
- **Application Prospects**: This new microfluidic platform provides a new approach for the construction of complex hollow tissue models. In the future, the in - vivo microenvironment can be simulated by adjusting the matrix stiffness, curvature, and biochemical components, and it can be applied in the fields of regenerative medicine and drug screening.
In conclusion, this research has solved the problem of difficultly and efficiently and uniformly fabricating 3D hollow cell structures in existing technologies, and provided new tools and methods for more accurately simulating the development and function of tissues and organs in vivo.