Abstract:Frequency selective surfaces (FSS) that can be tightly laminated to complex nondevelopable surfaces have a wide range of applications in many engineering areas. This paper presents a 3D flexible FSS prepared by mechanically guided 3D assembly, capable of being conformally adhered to complex surfaces, while maintaining stable frequency selective properties as well as transmission performance. The stretching strain applied to the prestrained ecoflex substrate can precisely tune and control the buckled 3D metal structures, which leads to the stretchability of the flexible FSS, introduces the increase of the inductance inside the metal cells, and expands the metal gap resulting in a reduction of the capacitance between the unit cells. The mutual correlation of capacitance and inductance ensures in the mechanism that the FSS transmission characteristics will not be significantly affected by the applied strain, as verified by calculations using the equivalent circuit method. Both the results obtained by the experiments and simulations indicate that the resonant frequency of the 3D flexible FSS is 5.7 GHz and the bandwidth at −10 dB is 0.94 GHz, while the resonant frequency shift will not exceed 0.45 Hz, and −10 dB bandwidth change will not exceed 0.32 GHz with applied strain of 17.8% in the ecoflex substrate. At the same time, the 3D flexible FSS maintains stable transmission performance for oblique incidence, with only 0.5 GHz frequency shift at 45° incidence. This stretchable flexible FSS with stable electromagnetic (EM) properties may find potential applications in EM shielding and spatial filtering due to its high flexibility, ready applicability, and cost‐effectiveness. This paper presents a 3D flexible frequency selective surface prepared by mechanically guided 3D assembly, capable of being conformally adhered to complex surfaces, which can maintain stable frequency‐selective properties as well as transmission performance when subjected to biaxial stretching strains.

Flexible Double‐Layer Adjustable Frequency Selective Surfaces Based on 3D Cross‐Shaped Kirigami Structure (Adv. Mater. Technol. 5/2024)

3D Flexible Frequency Selective Surface with Stable Electromagnetic Transmission Properties

Improved Hybrid Fdtd Method for Studying Tunable Graphene Frequency-Selective Surfaces (gfss) for Thz-Wave Applications

A Novel Dual-Band Frequency Selective Surface (FSS)

Graphene-FSS Hybrid Absorptive Structure with Amplitude/Frequency Dual-Modulated Passband

A Tunable Dual-band Circular-polarized FSS Based on Kirigami Structure

A Novel Three Dimensional Tunable Frequency Selective Surface Based on Graphene Micro-Ribbons

A Novel Tunable Frequency Selective Surface Absorber with Dual-Dof for Broadband Applications.

Kirigami-Inspired Linearly Polarized Reconfigurable 3-D Frequency-Selective Surface With Controllable Resonant Behavior

A Novel Miniaturized Dual-band Frequency Selective Surface

An Inkjet-printed Origami-based Frequency Selective Surface with Wide Frequency and Bandwidth Tunability

Four-Mode Switchable Frequency-Selective Surface Featuring Wide-Band and Angular Stability

A Multifunctional and Miniaturized Flexible Active Frequency Selective Surface

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

Research Progress and Application Prospects of Active Frequency Selective Surfaces

Flexible and Large‐Scale Liquid Metal Frequency‐Selective Surfaces: Enhanced Tuning through Mechanical Reconfiguration

A Kirigami-Based Reconfigurable Metasurface for Selective Electromagnetic Transmission Modulation

A Trifunctional Active Frequency Selective Surface for 6G Shielding Applications

A Flexible Multifunctional Active Frequency Selective Surface With Angular and Polarization Stability for Curved Surface Conformal

A Novel Angularly Stable Wide Passband Frequency Selective Surface

Flexible structured high-frequency film bulk acoustic resonator for flexible wireless electronics