Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Online stability boundary drifting prediction in milling process: An incremental learning approach

Numerical Robust Stability Estimation in Milling Process

Milling Stability Prediction for Flexible Workpiece Using Dynamics of Coupled Machining System

A new solution for stability prediction in flexible part milling

A Novel Chebyshev-wavelet-based Approach for Accurate and Fast Prediction of Milling Stability

Efficient stability prediction of milling process with arbitrary tool-holder combinations based on transfer learning

Robust Chatter Stability Prediction of the Milling Process considering Uncertain Machining Positions

Stability Research Considering Non-Linear Change in the Machining of Titanium Thin-Walled Parts

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

An Efficient Approach for Milling Dynamics Modeling and Analysis with Varying Time Delay and Cutter Runout Effect

An Adams-Moulton-based method for stability prediction of milling processes

A novel approach of stability and topography prediction in five-axis ball-end milling process through workpiece-edge-coupling

An improved time-varying stability analysis of micro milling considering tool wear

A data-driven framework for predicting machining stability: employing simulated data, operational modal analysis, and enhanced transfer learning

Interactive Coupling of Structural Dynamics and Milling Forces for High-Frequency Stability Prediction in Robotic Milling

Milling Stability Prediction and Adaptive Chatter Suppression Considering Helix Angle and Bending

A Novel Stability Prediction Method for Milling Operations Using the Holistic-Interpolation Scheme

An effective LSSVM-based approach for milling tool wear prediction

Accurate and Efficient Stability Prediction for Milling Operations Using the Legendre-Chebyshev-based Method

Surface Location Error Prediction and Stability Analysis of Micro-Milling with Variation of Tool Overhang Length

Stability Prediction of Milling with Periodic Spindle Speed Modulation based on Global Discrete Algorithm