Abstract:Triboelectric nanogenerator (TENG) has made significant progress in wind energy harvesting. As the most advantageous rotary TENG among wind energy harvesters, the severe material wear and the output that fluctuates with wind speed seriously hinder the application of TENG wind energy harvesters. In this study, we propose a round-trip oscillation triboelectric nanogenerator (RTO-TENG) consisting of a crank transmission mechanism and a power generation unit. The RTO-TENG utilizes a simple crank transmission mechanism combined with a zigzag-laminated triboelectric nanogenerator (Z-TENG) to achieve high-performance constant output and low material wear. The crank transmission mechanism can realize the transformation from circular motion to arc reciprocating motion, converting the random wind energy into bi-directional kinetic energy, driving the vertical contact and separation of the Z-TENG. Due to the low transmission ratio (1:1) of the crank transmission mechanism and the consistent frequency of the Z-TENG contact–separation with that of the pendulum, the RTO-TENG’s power generation unit (10 Z-TENGs) is insensitive to changes in wind speed, resulting in a constant and stable output response at various speeds. After 480,000 cycles, the output of RTO-TENG decreased by only 0.9% compared to the initial value of 6 µC, and the scanning electron microscopy (SEM) images of the polytetrafluoroethylene (PTFE) film showed no significant wear on the surface of the friction layer, demonstrating excellent output stability and abrasion resistance of the RTO-TENG wind energy collector’s material. The equipped energy management module, based on a gas discharge tube switch, can further enhance the output performance of the RTO-TENG. After optimizing its inductor parameter L to match the load capacitor, it can charge a 220 µF load capacitor to 13.4 V in 40 s, resulting in a 298% improvement in charging speed compared to the voltage of 4.48 V without the management module. Therefore, the RTO-TENG can efficiently provide power to low-power small electronic devices for Internet of Things (IoTs), such as road traffic warning signs and thermo-hygrometers.

Triboelectric‐electromagnetic Hybrid Generator with Single Timer under Monostable Operation for Wind Energy Harvesting

Environmental Self‐Adaptive Wind Energy Harvesting Technology for Self‐Powered System by Triboelectric‐Electromagnetic Hybridized Nanogenerator with Dual‐Channel Power Management Topology

Research on the electronic switch of power management circuits for triboelectric nanogenerator

Steady Output Triboelectric-Electromagnetic Hybrid Generator with Variable Drag Turbine Blades for Natural Wind Energy Harvesting

Study of A Hybrid Generator Based on Triboelectric and Electromagnetic Mechanisms

Hybridized Triboelectric‐Electromagnetic Nanogenerator for Wind Energy Harvesting to Realize Real‐Time Power Supply of Sensor Nodes

High Efficiency Power Management and Charge Boosting Strategy for A Triboelectric Nanogenerator

Magnetic switch structured triboelectric nanogenerator for continuous and regular harvesting of wind energy

Triboelectric nanogenerator with mechanical switch and clamp circuit for low ripple output

A hybrid nanogenerator based on wind energy harvesting for powering self-driven sensing systems

High-performance triboelectric nanogenerator with synchronization mechanism by charge handling

A Blade-Type Triboelectric-Electromagnetic Hybrid Generator with Double Frequency Up-Conversion Mechanism for Harvesting Breeze Wind Energy

A wind-driven rotating micro-hybrid nanogenerator for powering environmental monitoring devices based on a brush-type triboelectric unit

Regulating random mechanical motion using the principle of auto-winding mechanical watch for driving TENG with constant AC output – An approach for efficient usage of high entropy energy

Hybrid enhancement effect of structural and material properties of the triboelectric generator on its performance in integrated energy harvester

Triboelectric–Electromagnetic Hybrid Generator for Harvesting Blue Energy

Round-trip oscillation triboelectric nanogenerator with high output response and low wear to harvest random wind energy

Boost the Performance of Triboelectric Nanogenerators Through Circuit Oscillation

An Ultra-Durable Windmill-Like Hybrid Nanogenerator for Steady and Efficient Harvesting of Low-Speed Wind Energy

Swing‐Structured Triboelectric–Electromagnetic Hybridized Nanogenerator for Breeze Wind Energy Harvesting

Triboelectric nanogenerator with double rocker structure design for ultra-low-frequency wave full-stroke energy harvesting