Snapshot GISC video level 3D imaging based on phase modulation

Meixuan Li,Meijiao Wang,Naijie Guo,Feng Yang

DOI: https://doi.org/10.1364/ao.531114

IF: 1.9

2024-10-03

Applied Optics

Abstract:Meixuan Li, Meijiao Wang, Naijie Guo, Feng Yang For traditional point-to-point imaging technology, amplitude modulation intensity correlation imaging technology, and computational imaging ... [Appl. Opt. 63, 7652-7658 (2024)]

optics

What problem does this paper attempt to address?

Real-time reconstruction using electro-optics modulator-based structured illumination microscopy

Fanghui Xu,Jiachen Zhang,Dongdong Ding,Wenjie Liu,Chi Zheng,Sijia Zhou,Youhua Chen,Cuifang Kuang

DOI: https://doi.org/10.1364/OE.454982

IF: 3.8

2022-01-01

Optics Express

Abstract:Structured illumination microscopy (SIM), a super-resolution technology, has a wide range of applications in life sciences. In this study, we present an electro-optic high-speed phase-shift super-resolution microscopy imaging system including 2D SIM, total internal reflection fluorescence-SIM, and 3D SIM modes. This system uses galvanometers and an electro-optic modulator to flexibly and quickly control the phase and direction of structured illumination patterns. Moreover, its design consists of precise timing for improved acquisition speed and software architecture for real-time reconstruction. The highest acquisition rate achieved was 151 frames/s, while the highest real-time super-resolution reconstruction frame rate achieved was over 25 frames/s. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
3D Framing Camera System Based on Sample Cumulation Method

Yanbing Jiang,Huiming Yan,Xiuda Zhang,Long Wang,Yan Li

DOI: https://doi.org/10.1117/12.725097

2007-01-01

Abstract:A novel three-dimensional (3D) camera concept system could capture 3D image with thousands of pixels at range of several kilometer in real time was presented. The camera used a pulse laser to illuminate the scene, a solid-stat chargecouple device(CCD) sensor, and sample cumulation technology based on a gated binary image intensifier. The cumulation charges captured in CCD carried the information of range. The system was designed to have some significant advantages, such as low cost, simply schemes, high speed mainly limited to the speed of CCD frame capture. Potential applications include navigation of autonomous helicopter, large target identification, sensing and guidance, auto collision avoidance, robotic vision, atmospheric sensing and topography. In the paper, we discussed the fundamental principle and schemes of the 3D camera system based on sample cumulation and presented the feasible experiment result with a photo multiplier tube with binary character to simulate one pixel of the 3D camera system. Then we discussed the factors which influence the quality of 3D image according to the experiment result.
Quantitative Phase and Amplitude Imaging with an Efficient Support Constraint.

Jing Hu,Yibing Shen,Xiwei Xie

DOI: https://doi.org/10.1364/oe.27.017993

IF: 3.8

2019-01-01

Optics Express

Abstract:High-speed quantitative phase and amplitude imaging methods have led to numerous biological discoveries. For general samples, phase retrieval from a single-diffraction pattern has been an algorithmic and experimental challenge. Here we present a quantitative phase and amplitude imaging method applying an efficient support constraint to yield a rapid algorithmic convergence due to the removal of the twin image and spatial shift ambiguities. Compared to previous complex-valued imaging, our method is lenslet-free and relies neither on assumption based on sample sparsity nor interferometric measurements. Our method provides a robust method for imaging in materials and biological science, while its rapid imaging capability will benefit the investigation of dynamical processes.
Phase Imaging Based on Random Coding Modulation of Digital Micro-Mirror Device

Xie Xiwei,Hu Jing,Shen Yibing

DOI: https://doi.org/10.3788/aos202040.2311001

2020-01-01

Acta Optica Sinica

Abstract:Digital micro-mirror devices (DMDs) as spatial light modulators, have the advantages of high modulation speed and accuracy and can perform amplitude or phase modulation for illumination light, which are widely used in phase imaging systems. In this paper, a DMD is used for the random coding modulation of illumination light amplitude. We simulate the influences of the smallest modulation unit and switch ratio on phase imaging when random coding patterns are loaded on the DMD. Then we use a difference mapping iterative algorithm for light field reconstruction. Furthermore, it is experimentally verified that based on the parameters obtained via numerical simulation, we can retrieve amplitude and phase with a higher iteration speed and a fewer measurement times. In addition, for an object with the field of view of 4.3 mm X 4.3 mm, the reconstruction resolution reaches 6.9 mu m.
High-speed Fourier Ptychographic Microscopy for Quantitative Phase Imaging.

Yi Xiao,Shiyuan Wei,Shaolong Xue,Cuifang Kuang,Anli Yang,Maoliang Wei,Hongtao Lin,Renjie Zhou

DOI: https://doi.org/10.1364/ol.428731

IF: 3.6

2021-01-01

Optics Letters

Abstract:Fourier ptychographic microscopy (FPM), as an emerging computational imaging method, has been applied to quantitative phase imaging with resolution bypassing the physical limit of the detection objective. Due to the weak illumination intensity and long image acquisition time, the achieved imaging speed in current FPM methods is still low, making them unsuitable for real-time imaging applications. We propose and demonstrate a high-speed FPM method based on using laser illumination and digital micro-mirror devices for illumination angle scanning. In this new, to the best of our knowledge, FPM method, we realized quantitative phase imaging and intensity imaging at over 42 frames per second (fps) with around 1 µm lateral resolution. The quantitative phase images have revealed membrane height fluctuations of red blood cells with nanometer-scale sensitivity, while the intensity images have resolved subcellular features in stained cancer tissue slices.
Snapshot multi-dimensional computational imaging through a liquid crystal diffuser

Yunsong Lei,Qi Zhang,Yinghui Guo,Mingbo Pu,Fang Zou,Xiong Li,Xiaoliang Ma,Xiangang Luo

DOI: https://doi.org/10.1364/prj.476317

IF: 7.6

2023-03-03

Photonics Research

Abstract:Yunsong Lei, Qi Zhang, Yinghui Guo, Mingbo Pu, Fang Zou, Xiong Li, Xiaoliang Ma, Xiangang Luo Multi-dimensional optical imaging systems that simultaneously gather intensity, depth, polarimetric, and spectral information have numerous ... [Photon. Res. 11, B111-B124 (2023)]

optics
Single Snapshot Spatial Frequency Domain Imaging with Synchronous 3D Profile Correction

Kun Sheng,Yang Zhang,Chengzhi Wu,Jingshu Ni,Yao Huang,Zhongsheng Li,Meili Dong,Yikun Wang,Yong Liu,Yuanzhi Zhang

DOI: https://doi.org/10.1364/oe.537056

IF: 3.8

2024-01-01

Optics Express

Abstract:We have proposed a novel single-snapshot spatial frequency domain imaging method with synchronous three-dimensional (3D) profile correction that addresses the confounding effects of involuntary jitter in tissue under examination and the 3D profile of the tissue on the measurements of optical parameters during in vivo examinations. I. In this scheme, orthogonal composite sinusoidal modulated light is projected onto the tissue to be measured. The single- snapshot multi-frequency demodulation theory, combined with the different sensitivity of different directional fringes to heights, simultaneously recovers the 3D profile and the modulated diffuse reflectance of the tissue to be measured. Finally, the modulated diffuse reflectance is corrected by establishing the correction function of height and angle versus modulated diffuse reflectance, and the optical parameters of the tissue are inverted by the diffusion model. The accuracy of the 3D profile measurement of the scheme was verified using models with different morphologies, and the mean value of the measurement error was found to be lower than 3%. The accuracy of modulation diffuse reflectance measurement was verified using a hemispherical homogeneous phantom made of PTFE. After correction with this method, the standard deviation of the measured diffuse reflectance is reduced by up to 72.2%. Finally, the measurement effect of optical parameters is verified by in vivo experiments and compared with the standard three-phase method. The results demonstrated that the 3D-SSMD method exhibits enhanced stability and efficiency. This introduces an innovative technology for achieving real-time spatial frequency domain imaging, applicable in clinical settings. (c) 2024 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
Microwave Imaging Enhanced by Duplexed Random Phase Modulations

Qian Zhang,Qiangli Xi,Chengkai Zhu,Bin Zhang,Jie Wang,Huilong Yu,Yun Li,Zhongbo Zhu,Xiaojun Li,Lixin Ran

DOI: https://doi.org/10.1109/tmtt.2023.3242287

IF: 4.3

2023-01-01

IEEE Transactions on Microwave Theory and Techniques

Abstract:Microwave imaging under the illumination of randomized fields has demonstrated promising potential. Recent results showed that based on a phase-reconfigurable frequency-selective surface (PFSS), a cost-effective 24-GHz imager can be implemented, showing a wavelength-scale resolution. In this work, we further improve this imager by realizing duplexed random phase modulations. Numerical and experimental results showed that based on the same PFSS, the proposed duplex imager can significantly increase the number of available independent measurements (AIMs) and the sensing capacity. As the result, the error of the reconstructed image can be reduced by 49%, and the imaging resolution reaches 6.25 mm, that is, a half wavelength at 24 GHz. The aperture of the proposed duplex imager can be conveniently extended, exhibiting a promising potential in low-cost security scanning applications, especially for large objects such as human bodies.
Three-dimensional Phase and Intensity Reconstruction from Coherent Modulation Imaging Measurements.

Junhao Zhang,Dongyu Yang,Wenjin Lv,Xin Jin,Yishi Shi

DOI: https://doi.org/10.1364/oe.460648

IF: 3.8

2022-01-01

Optics Express

Abstract:Coherent modulation imaging is a lensless imaging technique, where a complex-valued image can be recovered from a single diffraction pattern using the iterative algorithm. Although mostly applied in two dimensions, it can be tomographically combined to produce three-dimensional (3D) images. Here we present a 3D reconstruction procedure for the sample's phase and intensity from coherent modulation imaging measurements. Pre-processing methods to remove illumination probe, inherent ambiguities in phase reconstruction results, and intensity fluctuation are given. With the projections extracted by our method, standard tomographic reconstruction frameworks can be used to recover accurate quantitative 3D phase and intensity images. Numerical simulations and optical experiments validate our method.
Simple Single-Shot Complete Spatiotemporal Intensity and Phase Measurement of an Arbitrary Ultrashort Pulse Using Coherent Modulation Imaging

Yingming Xu,Youjian Yi,Ping Zhu,Xingcheng Pan,Qiang Zhang,Liangze Pan,Fucai Ding,Dongjun Zhang,Xiao Liang,Meizhi Sun,Ailin Guo,Xuejie Zhang,Hua Tao,Zhe Guang,Cheng Liu,Xinglong Xie,Jianqiang Zhu,Rick Trebino

DOI: https://doi.org/10.1364/ol.469002

IF: 3.6

2022-01-01

Optics Letters

Abstract:We propose a simple single-shot spatiotemporal measurement technique called coherent modulation imaging for the spatio-spectrum (CMISS), which reconstructs the full three-dimensional high-resolution characteristics of ultrashort pulses based on frequency-space division and coherent modulation imaging. We demonstrated it experimentally by measuring the spatiotemporal amplitude and phase of a single pulse with a spatial resolution of 44 µm and a phase accuracy of 0.04 rad. CMISS has good potential for high-power ultrashort-pulse laser facilities and can measure even spatiotemporally complicated pulses with important applications.
Single-frame Three-Dimensional Imaging Using Spectral-Coded Patterns and Multispectral Snapshot Cameras

Chen Zhang,Anika Brehm,Andreas Breitbarth,Maik Rosenberger,Gunther Notni

DOI: https://doi.org/10.1117/1.oe.57.12.123105

IF: 1.3

2018-01-01

Optical Engineering

Abstract:We present an approach for single-frame three-dimensional (3-D) imaging using multiwavelength array projection and a stereo vision setup of two multispectral snapshot cameras. Thus a sequence of aperiodic fringe patterns at different wavelengths can be projected and detected simultaneously. For the 3-D reconstruction, a computational procedure for pattern extraction from multispectral images, denoising of multispectral image data, and stereo matching is developed. In addition, a proof-of-concept is provided with experimental measurement results, showing the validity and potential of the proposed approach. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License.
A universal microscope add-on for snapshot quantitative phase imaging by spectral encoding

Jinli Suo,Weihang Zhang,Xin Liu,Wenxuan Miao,Hai Qi,Qionghai Dai

DOI: https://doi.org/10.21203/rs.3.rs-4420203/v1

2024-01-01

Abstract:Observing the dynamics of colorless or transparent samples quantitatively is vital in cellular-level biomedical research. Among existing techniques, fluorescent microscopy suffers from phototoxicity and photobleaching issues, while snapshot quantitative phase imaging (QPI) demands a complicated setup. Thus, an easily accessible tool allowing for long-period, high-contrast observation of transparent samples remains still lacking. To tackle this problem, we propose a one-shot QPI approach compatible with both off-the-shelf and customized microscopes, which encodes the phase informative cues into a snapshot using a thin, flat optical device and decodes the phase information through an advanced deep network algorithm. The encoding involves overlaying defocused images obtained through a wafer-thin highly-dispersive glass with dual-bandpass coating, acting as an ``add-on'' module located between the specimen and objective. The successive phase retrieval is conducted with a well-designed network structure and the high-quality training data supports the phase reconstruction at high axial resolution. By experimenting on T cell migration, T cell activation, and real-time live-cell drug screening on systems with various magnifications, we demonstrate high-precision phase retrieval of our method under different experimental settings and on various platforms, which is expected to obtain a wide range of potential applications in studies of clustered cell morphology, cell counting, and cell migration tracking.
Single-Shot Intensity- and Phase-Sensitive Compressive Sensing-Based Coherent Modulation Ultrafast Imaging

Chengzhi Jin,Yingming Xu,Dalong Qi,Yunhua Yao,Yuecheng Shen,Lianzhong Deng,Ruozhong Han,Zhen Pan,Jiali Yao,Yilin He,Zhengqi Huang,Xingchen Pan,Hua Tao,Mingying Sun,Cheng Liu,Junhui Shi,Jinyang Liang,Zhiyong Wang,Jianqiang Zhu,Zhenrong Sun,Shian Zhang

DOI: https://doi.org/10.1103/physrevlett.132.173801

IF: 8.6

2024-04-25

Physical Review Letters

Abstract:Ultrafast imaging can capture the dynamic scenes with a nanosecond and even femtosecond temporal resolution. Complementarily, phase imaging can provide the morphology, refractive index, or thickness information that intensity imaging cannot represent. Therefore, it is important to realize the simultaneous ultrafast intensity and phase imaging for achieving as much information as possible in the detection of ultrafast dynamic scenes. Here, we report a single-shot intensity- and phase-sensitive compressive sensing-based coherent modulation ultrafast imaging technique, shortened as CS-CMUI, which integrates coherent modulation imaging, compressive imaging, and streak imaging. We theoretically demonstrate through numerical simulations that CS-CMUI can obtain both the intensity and phase information of the dynamic scenes with ultrahigh fidelity. Furthermore, we experimentally build a CS-CMUI system and successfully measure the intensity and phase evolution of a multimode Q -switched laser pulse and the dynamical behavior of laser ablation on an indium tin oxide thin film. It is anticipated that CS-CMUI enables a profound comprehension of ultrafast phenomena and promotes the advancement of various practical applications, which will have substantial impact on fundamental and applied sciences. https://doi.org/10.1103/PhysRevLett.132.173801 © 2024 American Physical Society

physics, multidisciplinary
Scanning‐Driven Photon‐Counting 3D Imaging through Scattering Media Via Asynchronous Polarization Modulation

Rui Liu,Zhiyuan Zhang,Xin Tian

DOI: https://doi.org/10.1002/lpor.202300916

2024-01-14

LASER & PHOTONICS REVIEWS

Abstract:This work presents a scanning‐driven photon‐counting 3D imaging system through scattering media via asynchronous polarization modulation. An asynchronous polarization‐modulated ranging method based on Gamma pulse model and a time reshaping method are further proposed to achieve 3D imaging through strong scattering media. The excellent imaging performance and the generalization capability in real applications are verified by abundant experimental results. Imaging through scattering media is widely studied in various applications including industrial inspection and autonomous driving. Most existing image sensors always suffer from the aliasing effect that generates a diffused image, leading to an extremely challenging problem in recovering targets of high quality, especially for 3D imaging. In this study, a scanning‐driven photon‐counting 3D imaging system through scattering media is proposed via asynchronous polarization modulation. To eliminate the aliasing effect, we utilize a point‐to‐point scanning strategy is used to illuminate the target and a photon‐counting detector to perceive weak echo signals passing through scattering media. Then, an asynchronous polarization‐modulated ranging method is proposed innovatively based on the Gamma pulse model to calculate the relative depth of the target for 3D imaging with the consideration of scattering media's difference. Therefore, the accuracy of the calculated depth and the generalization capability of the proposed method in real applications can be significantly improved. In addition, a time reshaping method is proposed to cope with the depth ambiguity caused by asynchronous measurements. In the experiment, a variety of strong scattering media is used to verify the excellent imaging capability of the proposed method.
Snapshot compressive structured illumination microscopy

Runqiu Luo,Miao Cao,Xing Liu,Xin Yuan

DOI: https://doi.org/10.1364/ol.505657

IF: 3.6

2024-01-03

Optics Letters

Abstract:Runqiu Luo, Miao Cao, Xing Liu, Xin Yuan We propose a snapshot compressive structured illumination microscopy (SoSIM) system to increase the number of reconstructed ... [Opt. Lett. 49, 186-189 (2024)]

optics
Snapshot spectral imaging: from spatial-spectral mapping to metasurface-based imaging

Kaiyang Ding,Ming Wang,Mengyuan Chen,Xiaohao Wang,Kai Ni,Qian Zhou,Benfeng Bai

DOI: https://doi.org/10.1515/nanoph-2023-0867

IF: 7.5

2024-03-23

Nanophotonics

Abstract:Snapshot spectral imaging technology enables the capture of complete spectral information of objects in an extremely short period of time, offering wide-ranging applications in fields requiring dynamic observations such as environmental monitoring, medical diagnostics, and industrial inspection. In the past decades, snapshot spectral imaging has made remarkable breakthroughs with the emergence of new computational theories and optical components. From the early days of using various spatial-spectral data mapping methods, they have evolved to later attempts to encode various dimensions of light, such as amplitude, phase, and wavelength, and then computationally reconstruct them. This review focuses on a systematic presentation of the system architecture and mathematical modeling of these snapshot spectral imaging techniques. In addition, the introduction of metasurfaces expands the modulation of spatial-spectral data and brings advantages such as system size reduction, which has become a research hotspot in recent years and is regarded as the key to the next-generation snapshot spectral imaging techniques. This paper provides a systematic overview of the applications of metasurfaces in snapshot spectral imaging and provides an outlook on future directions and research priorities.

optics,physics, applied,materials science, multidisciplinary,nanoscience & nanotechnology
Quantitative Interferometric Microscopy with Improved Full-Field Phase Aberration Compensation

Liang Xue,Shouyu Wang,Keding Yan,Nan Sun,Zhenhua Li,Fei Liu

DOI: https://doi.org/10.1117/1.oe.53.11.113105

IF: 1.3

2014-01-01

Optical Engineering

Abstract:Single-shot quantitative interferometric microscopy (QIM) needs a high-accuracy and rapid phase retrieval algorithm. Retrieved phase distributions are often influenced by phase aberration background caused by both imaging system and phase retrieval algorithms. Here, we propose an improved phase aberration compensation (PAC) approach in order to eliminate the phase aberrations inherent in the data. With this method, sample-free parts are identified and used to calculate the background phase, reducing phase errors induced in samples and providing high-quality phase images. We now demonstrate that QIM based on this PAC approach realizes high-quality phase imaging from a single interferogram. This is of great potential for a real-time speedy diagnosis. (C) 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)
Fast Quantitative Phase Imaging Based on Kramers-Kronig Relations in Space Domain

Yutong Li,Cheng Shen,Jiubin Tan,Xiu Wen,Ming Sun,Guancheng Huang,Shutian Liu,Zhengjun Liu

DOI: https://doi.org/10.1364/oe.444623

IF: 3.8

2021-01-01

Optics Express

Abstract:A fast quantitative phase imaging technology based on space-domain Kramers-Kronig relations is proposed. By incorporating Kramers-Kronig relations, we acquire distributions on phase via measurements of intensity over the captured spectrum. Only using four low-resolution images, we built a microscope prototype with a half-pitch resolution of 625 nm (final effective imaging performance of 0.5 NA) and a field of view of 3.8 mm2 at a wavelength of 625 nm via a 10×/0.25 NA objective. Correspondingly, the data recording time is 0.16 s, and the space-bandwidth-time product is 243.3 megapixels per second. It is worth noting that the proposed scheme requires neither mechanical scanning nor extra illumination like interferometry. Meanwhile, the reconstruction is non-iterative and object-independent. Our method provides a high-efficiency phase retrieval framework and is promising in biomedicine and dynamic observation.
Spatial light modulation for interferometric scattering microscopy

Vivien Walter,Christopher Parperis,Yujie Guo,Mark Ian Wallace

DOI: https://doi.org/10.1111/jmi.13347

IF: 1.9522

2024-08-28

Journal of Microscopy

Abstract:Interferometric scattering (iSCAT) microscopy enables high‐speed and label‐free detection of individual molecules and small nanoparticles. Here we apply point spread function engineering to provide adaptive control of iSCAT images using spatial light modulation. With this approach, we demonstrate improved dynamic spatial filtering, real‐time background subtraction, focus control, and signal modulation based on sample orientation.

microscopy
Full-field spectral-domain optical interferometry for snapshot three-dimensional microscopy

Rishyashring R Iyer,Mantas Žurauskas,Qi Cui,Liang Gao,R Theodore Smith,Stephen A Boppart,Rishyashring R. Iyer,R. Theodore Smith,Stephen A. Boppart

DOI: https://doi.org/10.1364/boe.402796

IF: 3.4

2020-09-28

Biomedical Optics Express

Abstract:Prevalent techniques in label-free linear optical microscopy are either confined to imaging in two dimensions or rely on scanning, both of which restrict their applications in imaging subtle biological dynamics. In this paper, we present the theoretical basis along with demonstrations supporting that full-field spectral-domain interferometry can be used for imaging samples in 3D with no moving parts in a single shot. Consequently, we propose a novel optical imaging modality that combines low-coherence interferometry with hyperspectral imaging using a light-emitting diode and an image mapping spectrometer, called Snapshot optical coherence microscopy (OCM). Having first proved the feasibility of Snapshot OCM through theoretical modeling and a comprehensive simulation, we demonstrate an implementation of the technique using off-the-shelf components capable of capturing an entire volume in 5 ms. The performance of Snapshot OCM, when imaging optical targets, shows its capability to axially localize and section images over an axial range of ±10 µm, while maintaining a transverse resolution of 0.8 µm, an axial resolution of 1.4 µm, and a sensitivity of up to 80 dB. Additionally, its performance in imaging weakly scattering live cells shows its capability to not only localize the cells in a densely populated culture but also to generate detailed phase profiles of the structures at each depth for long durations. Consolidating the advantages of several widespread optical microscopy modalities, Snapshot OCM has the potential to be a versatile imaging technique for a broad range of applications.

radiology, nuclear medicine & medical imaging,biochemical research methods,optics

Snapshot GISC video level 3D imaging based on phase modulation

Real-time reconstruction using electro-optics modulator-based structured illumination microscopy

3D Framing Camera System Based on Sample Cumulation Method

Quantitative Phase and Amplitude Imaging with an Efficient Support Constraint.

Phase Imaging Based on Random Coding Modulation of Digital Micro-Mirror Device

High-speed Fourier Ptychographic Microscopy for Quantitative Phase Imaging.

Snapshot multi-dimensional computational imaging through a liquid crystal diffuser

Single Snapshot Spatial Frequency Domain Imaging with Synchronous 3D Profile Correction

Microwave Imaging Enhanced by Duplexed Random Phase Modulations

Three-dimensional Phase and Intensity Reconstruction from Coherent Modulation Imaging Measurements.

Simple Single-Shot Complete Spatiotemporal Intensity and Phase Measurement of an Arbitrary Ultrashort Pulse Using Coherent Modulation Imaging

Single-frame Three-Dimensional Imaging Using Spectral-Coded Patterns and Multispectral Snapshot Cameras

A universal microscope add-on for snapshot quantitative phase imaging by spectral encoding

Single-Shot Intensity- and Phase-Sensitive Compressive Sensing-Based Coherent Modulation Ultrafast Imaging

Scanning‐Driven Photon‐Counting 3D Imaging through Scattering Media Via Asynchronous Polarization Modulation

Snapshot compressive structured illumination microscopy

Snapshot spectral imaging: from spatial-spectral mapping to metasurface-based imaging

Quantitative Interferometric Microscopy with Improved Full-Field Phase Aberration Compensation

Fast Quantitative Phase Imaging Based on Kramers-Kronig Relations in Space Domain

Spatial light modulation for interferometric scattering microscopy

Full-field spectral-domain optical interferometry for snapshot three-dimensional microscopy