Abstract:Nitrogen dioxide (NO2) is a major pollutant, causing acid rain, photochemical smog, and respiratory damage. The annual safe limit is 50 parts per billion (ppb), while concentrations exceeding 1 part per million (ppm) can result in respiratory ailments. Conventionally, n-type metal oxide semiconductors operating at elevated temperatures have been utilized for NO2 detection. Recently, p-type semiconductors with their hole accumulation layer, rapid recovery post-gas exposure, and good humidity tolerance are being investigated as potential NO2 sensors, once again working at elevated temperatures. In this work, a room-temperature (27 ± 2 °C) NO2 sensor is demonstrated by using a nanocomposite based on p-type bismuth ferrite (BFO) nanoparticles and silver nanowires (Ag NWs). This nanocomposite is capable of sensing a NO2 gas concentration of up to 0.2 ppm. The BFO nanoparticles are synthesized via a sol-gel route followed by sintering at 500 °C to form the crystalline phase. Nanocomposites are obtained by formulating a dispersion of the BFO nanoparticles and Ag NWs, followed by direct writing on both flexible and rigid substrates. The Ag NWs act as the conducting pathway, reducing the overall electrical resistance and thus enabling room-temperature operation. X-ray diffraction, scanning electron microscopy, and surface area studies provide phase information and surface morphology, and the porous nature of the film helps in room-temperature gas adsorption. The current-voltage and gas-sensing behavior are studied to obtain the optimized molar ratio (4:1 BFO/Ag NWs) for the sensor. The sensor deposited on poly(ethylene terephthalate) (PET) also works under a bent condition, indicating good flexibility. Rapid NO2 sensing was achieved in a BFO-Ag/PET device with response/recovery times of 7/8.5 s and 12/15 s in straight and bent geometries, respectively. Additionally, a good sensitivity of 30 to 60% was achieved for the BFO-Ag/PET device across 100 to 1000 ppb of NO2. The development of a nanocomposite combining an active sensing element (BFO) and a charge-transport element (Ag NWs) opens up a multitude of other application areas.

A Rapid ppb Level Room Temperature NO 2 Sensing by Using BiVO 4 –CeO 2 Composites with DFT Interpretation

A Combined Experimental and Theoretical Study of Composite Sno2-Bivo4 for Selective No2 Sensing

Improvement in NO2 Gas Sensing Properties of Semiconductor-Type Sensors by Loading Pt into BiVO4 Nanocomposites at Room Temperature

The synthesis of VO2(B) ultrathin nanosheets array and effects of optical radiation on room temperature NO2 gas sensing performance

Highly sensitive room-temperture NO2 gas sensor based on Bi2S3 nanorods

Room Temperature Gas Sensor Based on Rgo/bi2s3 Heterostructures for Ultrasensitive and Rapid NO2 Detection

The Sensitizing Effect of Enhanced NO2 Gas Sensing at Near-Room Temperature Using Pd-Decorated VO2 Nanowires

Bismuth Sulfide Nanorod/Vanadium Carbide MXene As Nitrogen Dioxide Gas Sensor Operating at Room Temperature under Ultraviolet-Assisted Recovery

Two-dimensional Cd-doped Porous Co3O4 Nanosheets for Enhanced Room-Temperature NO2 Sensing Performance

Bismuth Ferrite-Silver Nanowire Flexible Nanocomposites for Room-Temperature Nitrogen Dioxide Sensing

Microwave-Solvothermal Synthesis of Mesoporous CeO2/CNCs Nanocomposite for Enhanced Room Temperature NO2 Detection

Mesoporous and Encapsulated In2O3/Ti3C2Tx Schottky Heterojunctions for Rapid and Ppb-Level NO2 Detection at Room Temperature.

Interfacial Oxygen Vacancies and Energy-Level Engineering on CeO2-PPy-rGO Nanocomposites Towards Boosted NO2 Sensor Performance

2D/2D Bi2Se3/SnSe2 heterostructure with rapid NO2 gas detection

Enhanced Room Temperature NO2 Sensing Performance Based on N-doped Carbon Nanosheets@zno Nanoplates by Morphology Transition and White Light Illumination

Cu2O/CuO Hollow Nanospheres/Carbon Composites for NO2 Detection at Room Temperature

Constructing Adsorption Site-Enhanced Vo-BiOCl/rGO Heterostructures for Efficient Response to NO2/NH3 Gases at Room Temperature

Interfacial oxygen vacancies and energy-level engineering on CeO 2 -PPy-rGO nanocomposites towards boosted NO 2 sensor performance

An Ultrasensitive NO 2 Gas Sensor Based on a NiO-SnO 2 Composite with a Sub-ppb Detection Limit at Room Temperature

One-Dimensional Bi 2 S 3 Nanobelts-Based Surface Acoustic Wave Sensor for NO 2 Detection at Room Temperature

Design of Ce incorporated tricobalt tetroxide Co3O4 sensor with boosted gas sensing performance toward nitrogen dioxide