A gel single ion conducting polymer electrolyte enables durable and safe lithium ion batteries via graft polymerization

Yazhou Chen,Guodong Xu,Xupo Liu,Qiyun Pan,Yunfeng Zhang,Danli Zeng,Yubao Sun,Hanzhong Ke,Hansong Cheng

DOI: https://doi.org/10.1039/c8ra07557c

IF: 4.036

2018-01-01

RSC Advances

Abstract:A post-grafting strategy to synthesize single ion conducting polymer electrolytes for lithium metal secondary batteries.

chemistry, multidisciplinary

What problem does this paper attempt to address?

In Situ High‐performance Gel Polymer Electrolyte with Dual‐reactive Cross‐linking for Lithium Metal Batteries

Fuhe Wang,Honghao Liu,Yaqing Guo,Qigao Han,Ping Lou,Long Li,Jianjie Jiang,Shijie Cheng,Yuan‐Cheng Cao

DOI: https://doi.org/10.1002/eem2.12497

2022-08-30

Abstract:Lithium metal batteries have been considered as one of the most promising next‐generation power‐support devices due to their high specific energy and output voltage. However, the uncontrollable side‐reaction and lithium dendrite growth lead to the limited serving life and hinder the practical application of lithium metal batteries. Here, a tri‐monomer copolymerized gel polymer electrolyte (TGPE) with a cross‐linked reticulation structure was prepared by introducing a cross‐linker (polyurethane group) into the acrylate‐based in situ polymerization system. The soft segment of polyurethane in TGPE enables the far migration of lithium ions, and the ‐NH forms hydrogen bonds in the hard segment to build a stable cross‐linked framework. This system hinders anion migration and leads to a high Li+ migration number (tLi+=0.65), which achieves uniform lithium deposition and effectively inhibits lithium dendrite growth. As a result, the assembled symmetric cell shows robust reversibility over 5500 h at a current density of 1 mA cm‐2. The LFP||TGPE||Li cell has capacity retention of 89.8% after cycling 800 times at a rate of 1C. In summary, in situ polymerization of TGPE electrolytes is expected to be a candidate material for high energy density lithium metal batteries.

materials science, multidisciplinary
A novel single-ion conductor gel polymer electrolyte prepared by co-irradiation grafting and electrospinning process

Hang Li,Xiu Shen,Haiming Hua,Jingxiong Gao,Zhipeng Wen,Xin Wang,Longqing Peng,Dezhi Wu,Peng Zhang,Jinbao Zhao

DOI: https://doi.org/10.1016/j.ssi.2020.115246

IF: 3.699

2020-04-01

Solid State Ionics

Abstract:A novel way to manufacture single-ion conductor gel polymer electrolyte was reported in this work. Firstly, the γ-ray co-irradiation grafting is introduced to solve the difficulty on how to prepare single-ion conductor with considerable physical and chemical properties. Here, the PVDF-HFP is chosen as the polymer backbone for its excellent performance for polymer electrolyte while 2-acrylamido-2-methylpropanesulfonic acid (AMPS), a common and easily obtained double bond monomer with higher degree of negative charge delocalization, is chose to be the grafting monomer. To further promote the dissociation of Li+ ions from the polyanions, the prepared grafting copolymer is spun into a nonwoven membrane with high porosity. Besides, the grafting copolymer nonwoven fabric transforms the crystal form of PVDF-HFP to a better β-phase with higher polarity and maintains an approximative thermal stability. After plasticized by EC/DMC solvent, this prepared single-ion conductor gel polymer electrolyte (SIC-GPE) presence a high lithium-ion transference number (LTN) of 0.97 with an outstanding electrochemical stability and an appropriate battery performance.

chemistry, physical,physics, condensed matter
Leveraging polymer architecture design with acylamino functionalization for electrolytes to enable highly durable lithium metal batteries

Jiayu Zheng,Lingyan Duan,Hang Ma,Qi An,Qing Liu,Yongjiang Sun,Genfu Zhao,Hanlin Tang,Yang Li,Shimin Wang,Qijun Xu,Lilian Wang,Hong Guo

DOI: https://doi.org/10.1039/d4ee02218a

IF: 32.5

2024-08-18

Energy & Environmental Science

Abstract:Polymer electrolytes are considered one of the most pragmatic choices for achieving lithium metal batteries (LMBs) with enhanced energy density and safety. Nevertheless, unsatisfactory comprehensive performance in terms of inadequate mechanical properties, sluggish Li+ transport kinetics, and inferior electrode/electrolyte interfacial stability significantly constrain their practical utility. Herein, a rational molecular-level design is proposed to construct a novel polymer framework for gel polymer electrolytes (GPEs), which is accomplished by incorporating abundant acylamino-sites to establish a subtle hierarchical supramolecular network with permanent chemical crosslinking and reversible hydrogen bonding. The ingenious network combined with soft chain moiety regulation endows GPEs with highly enhanced mechanical strength and adaptable flexibility. Furthermore, the involvement of the unique polymer skeleton creates fast and reversible lanes for lithium-ion transport, with significant contributions from the acylamino sites and the pre-desolvation effect of the whole polymer matrix. Besides, the formation of favorable interphase compositions is conducive to dual-reinforced stable interfaces. Due to the ideal combination of accelerated Li+ transport and enhanced interfacial stability, an LFP||Li cell assembled with acylamino-functionalized GPEs exhibits an impressively long lifespan with capacity retention of 96.5% over 850 cycles at 1 C, and an LCO||Li cell can maintain a capacity retention of 96.8% after 300 cycles at 1 C. This study highlights the significance of bulk electrolytes and interface regulation in tandem and supplies novel insights into rational design for polymer architecture, ramping up the competitiveness of yielded electrolytes for prospective applications in the LMB realm.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
In-situ Synthesis of Fluoropolymer-Grafted Nanohybrid Electrolyte As Ion Reservoir for Li-metal Batteries

Baifei Wu,Jiarui Li,Shantao Han,Jinyan Mao,Peng Wen,Mao Chen,Yucheng Zhao,Jun Lin,Xinrong Lin

DOI: https://doi.org/10.1016/j.giant.2023.100201

2023-01-01

Giant

Abstract:Heterogeneity in ion flux of electrolyte materials largely dictates the growth of lithium dendrites and performance of lithium metal anode, which is considered “holy grail” to enable safe rechargeable batteries with ultrahigh energy density. This challenge is even more prominent in polymer-based electrolytes, which thereby leads to uneven ion distribution and mobility of ionic charge carriers, disturbing electrodeposition. In this work, we propose an ion-immobilization strategy achieved by an in-situ grafted nanohybrid fluoropolymer electrolyte, which takes advantages of unique weak solvation of fluoropolymers to tether anions to solvation structure of Li+. Such regulation in conjunction with the well dispersed nanometric aggregates, enables polymer electrolytes serving as ion reservoirs with strengthened weakly-solvating effect. As such, we suppressed formation of dendritic lithium by inducing uniform ion distribution, which significantly extended cell lifetime to over 1900 h in electrodeposition and prolonged charge-discharge cycles of in-situ lithium metal batteries up to 4.6 V at ambient temperature. This work demonstrates a new approach to regulate interfacial chemistry of Li anode and access high-performance polymer-based electrolytes.
A lithium carboxylate grafted dendrite-free polymer electrolyte for an all-solid-state lithium-ion battery

Zhongke Zhao,Yingmeng Zhang,Shaojun Li,Suhang Wang,Yongliang Li,Hongwei Mi,Lingna Sun,Xiangzhong Ren,Peixin Zhang

DOI: https://doi.org/10.1039/c9ta10689h

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:A novel solid polymer electrolyte was designed and synthesized based on a hybrid copolymer matrices grafting with lithium carboxylate branched chains, which ensures a homogeneous Li ion deposition and successfully inhibits the Li dendrite growth.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Zwitterion-doped self-supporting single-ion conducting polymer electrolyte membrane for dendrite-free lithium metal secondary batteries

He Xu,Wanying Li,Ling Huang,Danli Zeng,Yufeng Zhang,Yubao Sun,Hansong Cheng

DOI: https://doi.org/10.1007/s40843-023-2547-y

2023-08-31

Science China Materials

Abstract:Exploring self-supporting polymer electrolyte membranes that exhibit both high ionic conductivity and cation transference poses a challenge for lithium metal secondary batteries. In this research, we utilized poly(4,4 ′ -(diphenyl ether)-5,5 ′ -bibenzimidazole) (O-PBI) and grafted it with lithium propanesulfonyl(trifluoromethyl sulfonyl)imide (PBI- g -LiPSI) through a nucleophilic substitution reaction involving sodium 3-iodopropanesulfonyl(trifluoromethyl sulfonyl)imide (NaIPSI) and pre-activated O-PBI with lithium hydride. This process was followed by a lithium-ion exchange. The excellent leaving ability of the iodine substituent in NaIPSI allowed for a grafting ratio close to 100%, resulting in the highest possible lithium content. Moreover, the strong π−π interaction among the aromatic polybenzimidazole facilitated the formation of a self-supporting polymer electrolyte membrane, even when doped with zwitterionic 1-propanesulfonyl (trifluoromethyl sulfonyl)imide-3-methylimidazolium (MeImPSI). The ionic conductivities and 7 Li nuclear magnetic resonance chemical shifts of MeImPSI-doped PBI- g -LiPSIs showed a linear increase with the doping mass fraction of zwitterion. This finding confirmed that the zwitterion can act as a dipole, reducing the electrostatic attraction between the lithium cation and immobilized bis(sulfonyl)imide anion. Among different doping ratios, a 25-wt% MeImPSI-doped PBI- g -LiPSI exhibited the highest ionic conductivity of 0.68 mS cm −1 at room temperature, along with a lithium transference number of 0.95. To assess the performance of the electrolyte as well as separator, a lithium symmetric cell was assembed using the 25-wt% MeImPSI-doped PBI- g -LiPSI. The cell exhibited stable performance during galvanostatic cycling at ±0.5 mA cm −2 with a charge-discharge capacity of 2 mA h cm −2 , for an impressive duration of 2100 h. Additionally, we successfully demonstrated the application of single-ion conducting lithium metal secondary batteries. The film-forming property of PBI, combined with the enhanced ionic mobility provided by the zwitterion contributed to the overall excellent performance of the single-ion conducting polymer electrolyte system.

materials science, multidisciplinary
Solvent-Free Single-ion Conducting Polymer Electrolyte for Lithium-Metal Batteries Synthesized Via a Unique Donor-Acceptor Copolymerization

Yunfan Shao,Fannie Alloin,Dominic Bresser,cristina Iojoiu

DOI: https://doi.org/10.1039/d4ta05055j

IF: 11.9

2024-10-09

Journal of Materials Chemistry A

Abstract:Single-ion conducting polymer electrolytes are a very promising approach to achieve high-performance solid-state lithium-metal batteries. Herein, a highly conductive, solvent-free polymer electrolyte is designed and synthesized by a unique donor-acceptor copolymerization. The polymer electrolyte is blended with PVdF-HFP to yield thin membranes. The electrolyte exhibits a high conductivity of 5×10 5 S cm-1 at 90 °C. The electrochemical stability window exceeds 4 V as determined by cyclic voltammetry. These excellent proprieties allow for the stable cycling of symmetric Li||Li cells for more than 700 h with a maximum stripping/plating capacity of 0.6 mAh cm-2, which demonstrates the compatibility of the electrolyte with lithium-metal electrodes. Li||LiFePO4 battery cells provide high capacities and good cycling stability at 80 °C, and more remarkably also at 40 °C. The results render this novel polymer electrolyte a very promising candidate for realizing truly solid lithium-metal batteries.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Organoboron- and Cyano-Grafted Solid Polymer Electrolytes Boost the Cyclability and Safety of High-Voltage Lithium Metal Batteries

Dong Liu,Zheng Lu,Zehua Lin,Chunxiao Zhang,Kuan Dai,Weifeng Wei

DOI: https://doi.org/10.1021/acsami.3c01681

IF: 9.5

2023-04-21

ACS Applied Materials & Interfaces

Abstract:Solid-state polymer electrolytes (SPEs) are deemed as a class of sought-after candidates for high-safety and high-energy-density solid-state lithium metal batteries, but their low ionic conductivity, narrow electrochemical windows, and severe interfacial deterioration limit their practical implementations. Herein, an organoboron- and cyano-grafted polymer electrolyte (PVNB) was designed using vinylene carbonate as the polymer backbone and organoboron-modified poly(ethylene glycol) methacrylate...

materials science, multidisciplinary,nanoscience & nanotechnology
Construction of ion-conductive dual-channels by P(EA-co-AALi)-based gel electrolytes for high-performance lithium metal batteries

Ji Li,Xiancai Cui,Qilang Lin,Xiaolin Lyu,Qian Wang,Yan Yu,Chengkai Yang

DOI: https://doi.org/10.1007/s10008-023-05492-z

IF: 2.747

2023-04-11

Journal of Solid State Electrochemistry

Abstract:As people possess more safety conscious, the issue of electrolytes is attracting concern. The gel polymer electrolyte offers high ionic conductivity, wettability, and good interfacial contact, effectively reducing electrolyte leakage and improving battery safety. This study presents a novel gel polymer electrolyte that has been investigated for its excellent physical and electrochemical properties. The electrospinning film possesses a thin and flat surface with a thickness of only 40 ± 5 μm and particle size of around 300–400 nm. This creates an ion-conductive dual-channels that optimize the migration of lithium ions and ensure good contact and interfacial stability. In addition, the electrochemical stability window ranges from 0 ~ 6.1 V (vs. Li+/Li), which can be applied to most high-voltage cathode materials on the market. The NCM811//Li cell constructed with gel polymer electrolyte exhibited a first discharge capacity of 202.9 mAh g−1 at 0.5C and still maintain a discharge capacity of 117.5 mAh g−1 after 300 cycles, as well as a capacity retention rate of 57.9%. This strategy provides a new idea for the next generation of high-performance lithium metal batteries.

electrochemistry
In-Situ Synthesized Gel Polymer Electrolyte Enable High Capacity and Long-Cycle-Life Lithium Metal Batteries

Yi Zou,Wentao Zhao,Shixin Liu,Hui Fang,Lvjin Gao,Yuting Wang,Yinli Su,Li Chen,Zhaolin Liu

DOI: https://doi.org/10.1002/cssc.202401139

IF: 8.4

2024-09-06

ChemSusChem

Abstract:Solid-state lithium-metal batteries (SSLMBs) have attracted great attention due to their outstanding advantages in safety, electrochemical stability and interfacial compatibility. However, the low ionic conductivity and narrow electrochemical window restrict their practical application. Herein, in-situ polymerization electrolytes (IPEs) crosslinked by acrylonitrile (AN) and ethylene glycol dimethacrylate (EGDMA) exhibit the superior ionic conductivity of 1.77×10-3 S cm-1 at 25 °C, the ultrahigh lithium transference number (tLi+) of 0.784 and the wider electrochemical stable window (ESW) of 5.65 V. The IPEs make the symmetrical Li||Li cells achieve the highly stable lithium stripping/plating cycling for over 3000 h at 0.1 mA cm-2. Meanwhile, IPE endows the solid-state LiFePO4||Li batteries with an excellent long-cycle performance over 700 cycles at 2.5 C with a capacity retention ratio over 95 %, as well as 1000 cycles at 1 C and superior capacity retention of 85 %. More importantly, the in-situ polymerized electrolytes containing polyacrylonitrile (PAN) open up a new frontier to promote the practical application of solid-state batteries with high safety and high energy density via in-situ solidification technology.
Solid-state Graft Polymer Electrolytes with Conductive Backbones and Side-chains for Lithium Batteries

Guangjian Zeng,Shuqi Dai,Xiupeng Chen,Lu Qiu,Xian Kong,Mingjun Huang,Tao Wen

DOI: https://doi.org/10.1021/acs.macromol.3c02150

IF: 5.5

2024-01-01

Macromolecules

Abstract:Graft polymers have been widely investigated as solid polymer electrolytes (SPEs) in the past decades. However, the presence of insulating backbones in the conventional graft polymers damps the overall Li+ conductivity and transport number (tLi+). Herein, a series of polycarbonates (PCs) possessing ethylene oxide (EO) side-chains were designed and synthesized through ring-opening polymerization (ROP), and their ionic conductivities were evaluated as SPEs with LiTFSI. The synergy of conductive backbones and side-chains gives a high tLi+ value of 0.67, while having an ionic conductivity of 210-5 S cm-1 at 30 C. This work provides new insights into the development of high-performance SPEs by combining different conductive polymers.
Dendrite-Free Solid-State Li Metal Batteries Enabled by Bifunctional Polymer Gel Electrolytes

Qian Wu,Yun Yang,Zheng Chen,Qinting Su,Songde Huang,Dakun Song,Caizhen Zhu,Rui Ma,Cuihua Li

DOI: https://doi.org/10.1021/acsaem.1c01634

IF: 6.4

2021-09-09

ACS Applied Energy Materials

Abstract:Gel electrolytes have attracted great attention due to the high ionic conductivity and superior mechanical strength. However, poor interfacial stability between Li metal and gel electrolytes hinders their practical application. Here, a double polymer network gel electrolyte (DPNGE) is prepared via photopolymerizing branched acrylate on the poly(vinylidene fluoride-co-hexafluoropropylene) matrix to solve this issue. This DPNGE possesses an enhanced ionic conductivity of 9.5 × 10–4 S cm–1 at room temperature and a wide electrochemical stability window up to 5.0 V. The assembled Li/DPNGE/LiFePO4 batteries demonstrated a 153.7 mA h g–1 initial discharge capacity at 0.5 C and keep 92.7% capacity retention after more than 500 cycles. Moreover, a systematic analysis confirms that we construct a stable solid electrolyte interphase layer for homogeneous deposition and a stable cycle. These advantages enable the prepared DPNGE to show great application potential in high-performance lithium metal batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01634.AFM, DSC, and current–time curves of DPNGE; LSV curves of Py13TFSI and DPNGE without IL; long-term cycling performance of DPNGE and PVDF-HFP; and various GPEs reported in the literature (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Molecular engineering of a gel polymer electrolyte via in-situ polymerization for high performance lithium metal batteries

Qiyu Wang,Xiangqun Xu,Bo Hong,Maohui Bai,Jie Li,Zhian Zhang,Yanqing Lai

DOI: https://doi.org/10.1016/j.cej.2021.131331

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Solid-state lithium (Li) metal batteries have been considered as the candidate for the next generation power system for their outstanding performance in energy density and safety. Nevertheless, while solid-state electrolytes are still plagued by incompatible interphases, Li metal anode also has been hindered by dendrites growth. Herein, a facile in-situ synthesis of gel polymer electrolyte (GPE) with polyethylene glycol dimethacrylate (PEGDMA) and pentaerythritol tetraacrylate (PETEA) as the hybrid polymer skeleton, for the first time, is employed to deal with these issues. The GPE displays high ionic conductivity (7.6 mS cm−1) at room temperature and high stability towards Li metal anode. More interestingly, the in-situ GPE can construct a uniform and stable SEI on the surface of Li metal anode and guarantee a long cycling life (>500 cycles) with a capacity retention of 90% in the LiFePO4|GPE|Li battery. This GPE with hybrid polymer skeletons opens up an innovative idea for the electrolyte design that will eventually promote the practical application of lithium metal batteries.

engineering, chemical, environmental
A Novel UV-Cured Semi-IPN Structure PEO@Nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

Yinghua Zhu,Jiang Cao,Baohua Li,Yanjie Wang,Linfu Liang,Hong Chen

DOI: https://doi.org/10.1166/nnl.2019.2898

2019-01-01

Nanoscience and Nanotechnology Letters

Abstract:Polymer electrolyte is an effective way to solve stability and security issues in lithium (Li) metal anode caused by nonuniform lithium deposition and unstable solid electrolyte interphase (SEI). However, it still remains a challenge to obtain an electrolyte that combines high ionic conductivity and mechanical properties. Herein, we used nano-SiO2 grafted with reactive groups as crosslinkers to cooperate with PEO to construct a composite polymer network. And this polymer network was further interpenetrated with PVDF-HFP to build a Semi-IPN gel composite polymer electrolyte (Semi-IPN-GCPE) by simple UV curing. The polymer electrolyte exhibited high ionic conductivity (2.71x10(-3) S cm(-1) at room temperature), wide electrochemical stable window (similar to 5 V vs. Li/Li+), considerable tensile strength (7.04 MPa), breaking strain (248.1%), good thermal stability up to 330 degrees C and excellent stability with lithium metal anode. The assembled Li/Semi-IPN-GCPE/LiFePO4 cell delivered specific capacities of 103 mAh g(-1) at 10 C and presented above 90% capacity retention after 300 cycles at 1 C. Our work provides a facile approach to preparing dendrite-suppressing polymer electrolytes with potential applicability in next-generation Li metal batteries.
Li-Ga Alloy-Contained Hybrid Solid Electrolyte Interphase Induced by In Situ Polymerization for High-Performance Lithium Metal Batteries

Binyu Lu,Liuyi Hu,Wenkui Zhang,Jun Zhang,Yang Xia,Yongping Gan,Xinping He,Xinhui Xia,Ruyi Fang,Hui Huang

DOI: https://doi.org/10.1021/acsami.4c10855

IF: 9.5

2024-10-05

ACS Applied Materials & Interfaces

Abstract:Construction of quasi-solid-state lithium metal batteries (LMBs) by in situ polymerization is considered a key strategy for the next generation of energy storage systems with high specific energy and safety. Poly(1,3-dioxolane) (PDOL)-based electrolytes have attracted wide attention among researchers, benefiting from the low cost and high ionic conductivity. However, interfacial deterioration and uncontrollable growth of lithium dendrites easily appeared in LMBs due to the high reactivity of...

materials science, multidisciplinary,nanoscience & nanotechnology
Solid-state rigid-rod polymer composite electrolytes with nanocrystalline lithium ion pathways

Ying Wang,Curt J. Zanelotti,Xiaoen Wang,Robert Kerr,Liyu Jin,Wang Hay Kan,Theo J. Dingemans,Maria Forsyth,Louis A. Madsen

DOI: https://doi.org/10.1038/s41563-021-00995-4

IF: 41.2

2021-05-03

Nature Materials

Abstract:A critical challenge for next-generation lithium-based batteries lies in development of electrolytes that enable thermal safety along with the use of high-energy-density electrodes. We describe molecular ionic composite electrolytes based on an aligned liquid crystalline polymer combined with ionic liquids and concentrated Li salt. This high strength (200 MPa) and non-flammable solid electrolyte possesses outstanding Li+ conductivity (1 mS cm−1 at 25 °C) and electrochemical stability (5.6 V versus Li|Li+) while suppressing dendrite growth and exhibiting low interfacial resistance (32 Ω cm2) and overpotentials (≤120 mV at 1 mA cm−2) during Li symmetric cell cycling. A heterogeneous salt doping process modifies a locally ordered polymer–ion assembly to incorporate an inter-grain network filled with defective LiFSI and LiBF4 nanocrystals, strongly enhancing Li+ conduction. This modular material fabrication platform shows promise for safe and high-energy-density energy storage and conversion applications, incorporating the fast transport of ceramic-like conductors with the superior flexibility of polymer electrolytes.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter
Regulating the Solvation Structure in Polymer Electrolytes for High‐Voltage Lithium Metal Batteries

Yuncong Liu,Zhekai Jin,Zeyu Liu,Hao Xu,Furong Sun,Xue-Qiang Zhang,Tao Chen,Chao Wang

DOI: https://doi.org/10.1002/anie.202405802

2024-06-05

Angewandte Chemie International Edition

Abstract:Solid polymer electrolytes are promising electrolytes for safe and high-energy-density lithium metal batteries. However, traditional ether-based polymer electrolytes are limited by their low lithium-ion conductivity and narrow electrochemical window because of the well-defined and intimated Li+-oxygen binding topologies in the solvation structure. Herein, we proposed a new strategy to reduce the Li+-polymer interaction and strengthen the anion-polymer interaction by combining strong Li+-O (ether) interactions, weak Li+-O (ester) interactions with steric hindrance in polymer electrolytes. In this way, a polymer electrolyte with a high lithium ion transference number (0.80) and anion-rich solvation structure is obtained. This polymer electrolyte possesses a wide electrochemical window (5.5 V versus Li/Li+) and compatibility with both Li metal anode and high-voltage NCM cathode. Li||LiNi0.5Co0.2Mn0.3O2 full cells with middle-high active material areal loading (~7.5 mg cm-2) can stably cycle at 4.5 V. This work provides new insight into the design of polymer electrolytes for high-energy-density lithium metal batteries through the regulation of ion-dipole interactions.

chemistry, multidisciplinary
In situ synthesis of cross-linking gel polymer electrolyte for lithium metal batteries

Jiaxin Chen,Longxuan Wang,Zhipeng Huang,Yuxuan Liang,Juntian Qu,Ziqiang Wang

DOI: https://doi.org/10.1007/s10008-024-05975-7

IF: 2.747

2024-06-20

Journal of Solid State Electrochemistry

Abstract:The room temperature ionic conductivity of polyethylene oxide (PEO)-based polymer electrolytes is low, the electrochemical window is narrow, and the mechanical strength is relatively poor. In this work, a cross-linking gel-based solid composite polymer electrolyte (CG-SCPE) was synthesized by introducing electrochemically stable carbonate-based functional groups. The synthesized CG-SCPE presents excellent tensile strength (26 MPa) and a wide electrochemical stability window (> 4.5 V vs. Li/Li + ). Meanwhile, the in situ polymerization method induced by thermal heating resulted in good compatibility between electrodes/electrolytes. In addition, the assembled LiNi 0.5 Co 0.2 Mn 0.3 O 2 /CG-SCPE/Li battery exhibited satisfactory electrochemical performance. Therefore, the gel polymer electrolyte CG-SCPE with cross-linking network provides the possibility for future application of safe and high-performance solid-state lithium metal batteries. The results indicate that the introduction of cross-linking framework can simultaneously improve the mechanical strength, thermal stability, and electrochemical performance of solid polymer electrolyte.

electrochemistry
Synergistic Enhancement of Mechanical and Electrochemical Properties in Grafted Polymer/Oxide Hybrid Electrolytes

Felix Scharf,Annalena Krude,Peter Lennartz,Moritz Clausnitzer,Gourav Shukla,Annika Buchheit,Fabian Kempe,Diddo Diddens,Pascal Glomb,Melanie M Mitchell,Timo Danner,Andreas Heuer,Arnulf Latz,Martin Winter,Gunther Brunklaus

DOI: https://doi.org/10.1002/smll.202404537

IF: 13.3

2024-08-26

Small

Abstract:Lithium metal batteries operated with high voltage cathodes are predestined for the realization of high energy storage systems, where solid polymer electrolytes offer a possibility to improve battery safety. Al2O3_PCL is introduced as promising hybrid electrolyte made from polycaprolactone (PCL) and Al2O3 nanoparticles that can be prepared in a one-pot synthesis as a random mixture of linear PCL and PCL-grafted Al2O3. Upon grafting, synergistic effects of mechanical stability and ionic conductivity are achieved. Due to the mechanical stability, manufacture of PCL-based membranes with a thickness of 50 µm is feasible, yielding an ionic conductivity of 5·10-5 S cm-1 at 60 °C. The membrane exhibits an impressive performance of Li deposition in symmetric Li||Li cells, operating for 1200 h at a constant and low overvoltage of 54 mV and a current density of 0.2 mA cm-2. NMC622 | Al2O3_PCL | Li cells are cycled at rates of up to 1 C, achieving 140 cycles at >80% state of health. The straightforward synthesis and opportunity of upscaling as well as solvent-free polymerization render the Al2O3_PCL hybrid material as rather safe, potentially sustainable and affordable alternative to conventional polymer-based electrolytes.
Synthesis of a crosslinked ether-based polymer for high-performance semi-solid lithium metal batteries via in situ integration

Dezhi Yang,Yanan Yang,Yeying Cui,Yi-Yang Sun,Tao Zhang

DOI: https://doi.org/10.1039/d4ta04857a

IF: 11.9

2024-09-19

Journal of Materials Chemistry A

Abstract:In situ ring-opening polymerization of ether-based monomers has shown promising application in solid-state lithium metal batteries owing to their positive lithium compatibility, mild reaction conditions, and facile preparation. However, typical poly(1,3-dioxolane) (PDOL) based electrolyte still struggles with low ionic conductivity, narrow electrochemical window, and poor thermal stability, which greatly retard its further progress. Herein, we constructed a crosslinked PDOL semi-solid electrolyte initiated by a three-armed crosslinker and high voltage resistant fluorinated solvents, which shows favourable stability toward lithium metal (lithium plating/stripping stably operating for 2700 h at 0.2 mA cm −2 with no significant polarization growth) and a high electrochemical oxidation window of up to 4.6 V. A lithium metal coin cell using this crosslinked semi-solid electrolyte equipped with LFP expresses excellent cycling stability with a capacity retention of 88% for 1000 cycles at 1C. A 50 mA h pouch cell with an NCM811 cathode exhibited favourable working ability. Meanwhile, the crosslinked electrolyte demonstrated better solid-state characteristics and thermal stability compared with a long-chain electrolyte. This work provides a prospective reference for the application of ether-based electrolyte in high safety and high energy density lithium metal batteries.

materials science, multidisciplinary,chemistry, physical,energy & fuels

A gel single ion conducting polymer electrolyte enables durable and safe lithium ion batteries via graft polymerization

In Situ High‐performance Gel Polymer Electrolyte with Dual‐reactive Cross‐linking for Lithium Metal Batteries

A novel single-ion conductor gel polymer electrolyte prepared by co-irradiation grafting and electrospinning process

Leveraging polymer architecture design with acylamino functionalization for electrolytes to enable highly durable lithium metal batteries

In-situ Synthesis of Fluoropolymer-Grafted Nanohybrid Electrolyte As Ion Reservoir for Li-metal Batteries

A lithium carboxylate grafted dendrite-free polymer electrolyte for an all-solid-state lithium-ion battery

Zwitterion-doped self-supporting single-ion conducting polymer electrolyte membrane for dendrite-free lithium metal secondary batteries

Solvent-Free Single-ion Conducting Polymer Electrolyte for Lithium-Metal Batteries Synthesized Via a Unique Donor-Acceptor Copolymerization

Organoboron- and Cyano-Grafted Solid Polymer Electrolytes Boost the Cyclability and Safety of High-Voltage Lithium Metal Batteries

Construction of ion-conductive dual-channels by P(EA-co-AALi)-based gel electrolytes for high-performance lithium metal batteries

In-Situ Synthesized Gel Polymer Electrolyte Enable High Capacity and Long-Cycle-Life Lithium Metal Batteries

Solid-state Graft Polymer Electrolytes with Conductive Backbones and Side-chains for Lithium Batteries

Dendrite-Free Solid-State Li Metal Batteries Enabled by Bifunctional Polymer Gel Electrolytes

Molecular engineering of a gel polymer electrolyte via in-situ polymerization for high performance lithium metal batteries

A Novel UV-Cured Semi-IPN Structure PEO@Nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

Li-Ga Alloy-Contained Hybrid Solid Electrolyte Interphase Induced by In Situ Polymerization for High-Performance Lithium Metal Batteries

Solid-state rigid-rod polymer composite electrolytes with nanocrystalline lithium ion pathways

Regulating the Solvation Structure in Polymer Electrolytes for High‐Voltage Lithium Metal Batteries

In situ synthesis of cross-linking gel polymer electrolyte for lithium metal batteries

Synergistic Enhancement of Mechanical and Electrochemical Properties in Grafted Polymer/Oxide Hybrid Electrolytes

Synthesis of a crosslinked ether-based polymer for high-performance semi-solid lithium metal batteries via in situ integration