Nonlinear Heating System of Modular-Pouring and Platform Furnaces for Firing Bulk Materials

A. I. Nizhegorodov

DOI: https://doi.org/10.1007/s11148-021-00630-4

2021-11-01

Refractories and Industrial Ceramics

Abstract:This article presents a design of a suspended nonlinear heating system of modular-pouring and platform furnaces for firing vermiculite and other bulk materials. The previous design of linear heating systems did not provide uniform heating of heat-treated materials, and the material in the near-wall zones did not receive sufficient thermal energy. In addition, the overheating of the central zone increased the burnout frequency of the heaters themselves, which affected the furnace reliability. Accordingly, the use of a nonlinear heating system reversed this distribution. The power of the near-wall heater exceededA that of the central one by 1.2 – 1.36 times, depending on the ratio of the diameters of thin and thick (4 mm in diameter) heaters. Moreover, not only their electric power but also the fluxes of thermal radiation falling on the surface of the hearth increased, which resulted in an increase in the temperature of the material being processed. The obtained values of the temperature of vermiculite grains in the near-wall zones of the firing module exceeded the temperature of vermiculite in the central zone by 26%, which is sufficient for the high-quality swelling of the material. With the use of a nonlinear heating system, a redistribution of temperatures on the heated surfaces occurred toward relatively cold near-wall zones, such that the thermal presentation changed to the opposite and the cold near-wall zones became relatively hot.

materials science, ceramics