Abstract:The problem of simulating the interaction of spacecraft travelling at velocities necessary for starflight with the interplanetary and interstellar medium is considered. Interaction of protons, atoms, and ions at kinetic energies relative to the spacecraft (MeV per nucleon) is essentially a problem of sputtering. More problematic is the impact of dust grains, macroscopic objects on the order of 10 nm ($10^{-21}$ kg) to 1 $\mu$m ($10^{-15}$ kg), the effects of which are difficult to calculate, and thus experiments are needed. The maximum velocity of dust grains that can be achieved at present in the laboratory using electrostatic methods is approximately 100 km/s, two orders of magnitude below starflight velocities. The attainment of greater velocities has been previously considered in connection with the concept of impact fusion and was concluded to be technologically very challenging. The reasons for this are explained in terms of field emission, which limits the charge-to-mass ratio on the macroscopic particle being accelerated as well as the voltage potential gradient of the accelerating electrostatic field, resulting in the accelerator needing to be hundreds to thousands of kilometers long for $\mu$m-sized grains. Use of circular accelerators (cyclotrons and synchrotrons) is not practical due to limitations on magnetic field strength making the accelerator thousands of kilometers in size for $\mu$m-sized grains. Electromagnetic launchers (railguns, coilguns) have not been able to produce velocities greater than conventional gas guns (< 10 km/s). The nearest feasible technologies (tandem accelerators, macromolecular accelerators) to reach the regime of projectile mass and velocity of interest are reviewed. Pulsed lasers are found to be the only facilities able to accelerate condensed phase matter to velocities approaching 1000 km/s but unlikely to be able to reach greater speeds.

Attainability of high velocities for impact ignition

Aero Heating Optimization of a Hypersonic Thermochemical Non-Equilibrium Flow around Blunt Body by Application of Opposing Jet and Blunt Spike

Ultrahigh Acceleration of Plasma Blocks by Nonlinear Forces for Side-On Laser Ignition of Solid Density Fusion Fuel

Experimental Investigation of a Gliding Discharge Plasma Jet Igniter

Flame/flow dynamics at the piston surface of an IC engine measured by high-speed PLIF and PTV

Physical Mechanism of Ultrafast Flame Acceleration.

Chemical Kinetic Analysis of High-Pressure Hydrogen Ignition and Combustion toward Green Aviation

Ignition Enhancement of Lean Kerosene Air Mixture by Multichannel Jet Enhanced Plasma Igniter

High-Fidelity Resolution of the Characteristic Structures of A Supersonic Hydrogen Jet Flame with Heated Co-Flow Air

Influence of hydrodynamic instabilities on the propagation mechanism of fast flames

Generation of Ultrafast Jets through the Implosion of a Nested Conical Wire Array

An Experimental Study of Ignition in Nonpremixed Counterflowing Hydrogen Versus Heated Air

Ablation of Nonlinear-Force Driven Plasma Blocks for Fast Igniter Application

Pressure Dynamics, Self-Ignition, and Flame Propagation of Hydrogen Jet Discharged under High Pressure

Generation and Optimization of Electron Currents along the Walls of a Conical Target for Fast Ignition

Experimental Simulation of Dust Impacts at Starflight Velocities

The Role of Target Melting in Particle Impact Ignition with Inert Particulate

Turbulent Ignition Of Non-Premixed Hydrogen By Heated Counterflowing Atmospheric Air

Numerical Study of High-g Combustion Characteristics in a Channel with Backward-Facing Steps

Two-stage autoignition and edge flames in a high pressure turbulent jet

Ignition and Flame Stabilization in High Speed Flows.