Abstract:A recent development in radio astronomy is to replace traditional dishes with many small antennas. The signals are combined to form one large, virtual telescope. The enormous data streams are cross-correlated to filter out noise. This is especially challenging, since the computational demands grow quadratically with the number of data streams. Moreover, the correlator is not only computationally intensive, but also very I/O intensive. The LOFAR telescope, for instance, will produce over 100 terabytes per day. The future SKA telescope will even require in the order of exaflops, and petabits/s of I/O. A recent trend is to correlate in software instead of dedicated hardware, to increase flexibility and to reduce development efforts. We evaluate the correlator algorithm on multi-core CPUs and many-core architectures, such as NVIDIA and ATI GPUs, and the Cell/B.E. The correlator is a streaming, real-time application, and is much more I/O intensive than applications that are typically implemented on many-core hardware today. We compare with the LOFAR production correlator on an IBM Blue Gene/P supercomputer. We investigate performance, power efficiency, and programmability. We identify several important architectural problems which cause architectures to perform suboptimally. Our findings are applicable to data-intensive applications in general. The processing power and memory bandwidth of current GPUs are highly imbalanced for correlation purposes. While the production correlator on the Blue Gene/P achieves a superb 96% of the theoretical peak performance, this is only 16% on ATI GPUs, and 32% on NVIDIA GPUs. The Cell/B.E. processor, in contrast, achieves an excellent 92%. We found that the Cell/B.E. and NVIDIA GPUs are the most energy-efficient solutions, they run the correlator at least 4 times more energy efficiently than the Blue Gene/P.

Solving the Corner-Turning Problem for Large Interferometers

ICE-based Custom Full-Mesh Network for the CHIME High Bandwidth Radio Astronomy Correlator

A Scalable Correlator Architecture Based on Modular FPGA Hardware, Reuseable Gateware, and Data Packetization

Omniscopes: Large Area Telescope Arrays with only N log N Computational Cost

Revisiting Hybrid Interferometry With Low-Frequency Radio Astronomy Arrays

Imaging swiFTly: Streaming widefield Fourier Transforms for large-scale interferometry

Quantum Radio Astronomy: Quantum Linear Solvers for Redundant Baseline Calibration

Radio Interferometer with Simple antennas

Algorithms for FFT Beamforming Radio Interferometers

Glancing Through Massive Binary Radio Lenses: Hardware-Aware Interferometry With 1-Bit Sensors

Accelerating a Radio Astronomy Correlator on FPGA

Design and Implementation of a Scalable Correlator Based on ROACH2+GPU Cluster for Tianlai 96-Dual-Polarization Antenna Array

A Design Method for Low-Profile Wide-Angle Scanning Reconfigurable Transmitarray

Low Complexity Radio Frequency Interference Mitigation for Radio Astronomy Using Large Antenna Array

A 1024-Channel Wideband Digital Subsystem Prototype for Large Aperture Array Radio Telescope

Design of Rim-Located Reconfigurable Reflectarrays for Interference Mitigation in Reflector Antennas

Accelerating Faceting Wide-Field Imaging Algorithm with FPGA for SKA Radio Telescope As a Vast Sensor Array.

Correlating Radio Astronomy Signals with Many-Core Hardware