Abstract:In this paper, we describe a velocity interferometer system based entirely on single-mode fiber optics. This paper includes a description of principles used in developing the single-mode velocity interferometry system (SMV). The SMV design is based on polarization-insensitive components. Polarization adjusters are included to eliminate the effects of residual birefringence and polarization dependent losses in the interferometers. Characterization measurements and calibration methods needed for data analysis and a method of data analysis are described. Calibration is performed directly using tunable lasers. During development, we demonstrated its operation using exploding-foil bridge-wire fliers up to 200 m/s. In a final test, we demonstrated the SMV in a gas gun experiment up to 1.2 km/sec. As a basis for comparison in the gas gun experiment, we used another velocimetry technique that is also based on single-mode fiber optics: photonic Doppler velocimetry (PDV). For the gas gun experiment, we split the light returned from a single target spot and performed a direct comparison of the homodyne (SMV) and heterodyne (PDV) techniques concurrently. The two techniques had a negligible mean difference and a 1.5% standard deviation in the one-dimensional shock zone. Within one interferometer delay time after a sudden Doppler shift, a SMV unencumbered by multimode-fiber dispersion exhibits two color beats. These beats have the same period as PDV beats-this interference occurs between the "recently" shifted and "formerly unshifted" paths within the interferometer. We believe that recognizing this identity between homodyne and heterodyne beats is novel in the shock-physics field. SMV includes the conveniences of optical fiber, while removing the time resolution limitations associated with the multimode delivery fiber.

Asymmetric Mach-Zehnder fiber interferometer test of the anisotropy of the speed of light

Mach-Zehnder fiber interferometer test of the anisotropy of the speed of light

Mach-Zehnder Interferometers Assembled with Optical Microfibers or Nanofibers

Mach-Zehnder interferometer with absorbing Fabry-Pérot cavities

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Multibeam Interferometer Using a Photonic Crystal Fiber with Two Asymmetric Cores for Torsion, Strain and Temperature Sensing

"Visible range curvature fiber-optic sensor with low strain-temperature dependence"

Compact Mach-Zehnder Interferometer for Practical Vernier Effect Sensing System with High Extinction Ratio

Coherence and information in a fiber interferometer

Study on Vernier effect of orthogonal Mach-Zehnder interferometers based on Polarization-maintaining fiber

Optical fiber temperature sensor with Vernier effect formed by Mach–Zehnder interferometer cascaded Sagnac interferometer based on Hollow-core photonic crystal fiber

In-Fiber Mach-Zehnder Interferometer Exploiting a Micro-Cavity For Strain and Temperature Simultaneous Measurement

Experimental Study of White Light Interferometry in Mach–Zehnder Interferometers Based on Standard Single Mode Fiber

Optical Fiber Mach-Zehnder Interferometer Based on a Pair of Microholes

An in-fiber Mach–Zehnder strain sensor for studying multimode interference of light

Bent Fiber Interferometer

Optical Fiber Strain and Temperature Sensor Based on an In-Line Mach–Zehnder Interferometer Using Thin-Core Fiber

High Performance In-line Mach-Zehnder Interferometer As Reference Arm for Vernier Effect Generation

A Mach–Zehnder Interferometer Based on a No-Core Fiber With In-Fiber Waveguides

Single-mode fiber, velocity interferometry