Abstract:High diffraction signal-to-background ratios (SBRs), the ratio of diffraction peak integrated intensity over its background intensity, are desirable for a neutron diffractometer to acquire good statistics for diffraction pattern measurements and subsequent data analysis. For a given detector, while the diffraction peak signals primarily depend on the characteristics of the neutron beam and sample coherent scattering, the background largely originates from the sample incoherent scattering and the scattering from the instrument space. In this work, we investigated the effect of collimation on neutron diffraction SBRs of Si powder measurements using one high-angle area detector bank coupled with six different collimation configurations in a large and complex instrument space at the engineering materials diffractometer VULCAN, SNS, ORNL. The results revealed that the diffraction SBRs can be significantly improved by a proper coarse collimator that leaves no gap between the detector and the collimator, and the improvement of SBRs by a fine radial collimator was remarkable with a proper coarse collimator in place but not distinguishable without one. It was also found that the diffraction SBRs were not effectively improved by adding the neutron-absorbing element boron to the fine radial collimator body, which indicates that either the absorption of secondary scattered neutrons by the added boron is insignificant or the collimator base material (resin and ABS) alone attenuates background scattering sufficiently. These findings could serve as a useful reference for diffractometer developers and/or operators to optimize their collimation to achieve higher diffraction SBRs.

Neutron powder diffraction atomic pair distribution function analysis using the ARCS chopper spectrometer at the Spallation Neutron Source

The new Cold Neutron Chopper Spectrometer at the Spallation Neutron Source - Design and Performance

The Cold Neutron Chopper Spectrometer at the Spallation Neutron Source - A Review of the first 8 Years of Operation

Protein crystallography with spallation neutrons

POWTEX visits POWGEN

Effect of Collimation on Diffraction Signal-to-Background Ratios at a Neutron Diffractometer

A Comparative Study of Experimental Configurations in Synchrotron Pair Distribution Function

Electronic angle focusing for neutron time‐of‐flight powder diffractometers

Phonons from neutron powder diffraction

A strategy of consistent X-ray and neutron double-difference pair distribution function analysis of nanoparticle dispersions

On the use of laboratory X-ray diffraction equipment for Pair Distribution Function (PDF) studies

Rapid Acquisition Pair Distribution Function (RA-PDF) Analysis

Demonstration of neutron time-of-flight diffraction with an event-mode imaging detector

Polarized Neutron Diffraction at A Spallation Source for Magnetic Studies

Pair distribution function and structure factor of spherical particles

Towards a robust ad-hoc data correction approach that yields reliable atomic pair distribution functions from powder diffraction data

Protocols for Obtaining Reliable PDFs from Laboratory x-ray Sources Using PDFgetX3

Hierarchical Bayesian approach for adaptive integration of Bragg peaks in time-of-flight neutron scattering data

Advantages of a curved image plate for rapid laboratory-based x-ray total scattering measurements: Application to pair distribution function analysis.

Neutron spectrometry of a 241Americium-Boron neutron source using the NCT-WES single-moderator neutron spectrometer

Corrections for the Geometric Distortion of the Tube Detectors on SANS Instruments at ORNL