Abstract:Wearable electronic devices such as health monitors, sensors, and e‐skin can be powered by lightweight, high‐power supercapacitors. Using a binder‐free and low‐temperature hydrothermal method, polyhedral ZnO nanoparticles were grown on carbon nanotube (CNT)‐decorated cotton fabric, which is friendly to human skin and highly wearable, inexpensive, and thus commercially viable. The concentration of the starting material, zinc acetate, was varied to optimize the electrochemical performance. The evenly spaced polyhedral ZnO facilitated efficient permeation of the electrolyte into the active material. The fabric filaments were decorated with CNTs to enhance electron transfer and the overall electrochemical processes. The symmetric cell comprised of cotton fabric decorated with ZnO polyhedron/CNT showed no discernible change in the cyclic voltammetry curves even after 500 bending cycles, demonstrating the mechanical durability of the electrode. The potential window of 1.6 V using a Na2SO4/K2SO4 aqueous dual‐ion electrolyte improved the long‐term electrochemical stability and increased the energy storage capacity. The capacitance retention was 94% after 5000 cycles at a current density of 1 A·g−1, indicating long‐term electrochemical stability. A specific capacitance of 375 F·g−1 at a current density of 5 A·g−1 and energy density of 33.3 Wh·kg−1 at a power density of 2000 W·kg−1 were recorded for the optimized electrode. Polyhedral ZnO was grown on cotton fabric using a hydrothermal process. The electrochemical performance was optimized by varying the zinc acetate concentration. The highest specific capacitance was 375 F·g−1 at a current density of 5 A·g−1. Under optimal conditions, the capacitance retention was 94% at N = 5000 cycles. The energy density of the electrode was as high as 33.3 Wh·kg−1. The decoration of fabric fibers by zinc oxide polyhedron and carbon nanotube via hydrothermal for use as flexible and lightweight supercapacitor electrodes was demonstrated. The hexagonal structures in a one‐step deposition, without any binder and a metallic current collector increase the specific capacitance and energy density of the overall device. The exceptional stability during long‐term cycling and wide (1.6 V) operating potential were also demonstrated.

2D nanochannels boosting ionic conductivity of zinc-ion "water-in-salt" electrolyte for wearable micro-supercapacitor

A Zinc Cobalt Sulfide Nanosheet Array Derived from a 2D Bimetallic Metal-Organic Frameworks for High-Performance Supercapacitors

A Hollow-Shaped ZIF-8-N-Doped Porous Carbon Fiber for High-Performance Zn-Ion Hybrid Supercapacitors

Silicon-nanoforest-based solvent-free micro-supercapacitors with ultrahigh spatial resolution <i>via</i> IC-compatible <i>in situ</i> fabrication for on-chip energy storage

Self-charging V2CTx/CNT-based zinc ion micro-supercapacitor for wearable electronics

Adapting a Kinetics-Enhanced Carbon Nanostructure to Li/Na Hybrid Water-in-Salt Electrolyte for High-Energy Aqueous Supercapacitors

Self-chargeable supercapacitor made with MXene-bacterial cellulose nanofiber composite for wearable devices

High-energy aqueous supercapacitors enabled by N/O codoped carbon nanosheets and “water-in-salt” electrolyte

Multivalent Ion Storage Towards High-Performance Aqueous Zinc-Ion Hybrid Supercapacitors

Boosting Ion Diffusion Kinetics of MXene Inks with Water‐in‐Salt Electrolyte for Screen‐Printed Micro‐Supercapacitors

Deep eutectic solvent-infused two-dimensional metal–organic framework membranes as quasi-solid-state electrolytes for wearable micro-supercapacitors

Flexible Quasi‐Solid‐State High‐Performance Aqueous Zinc Ion Hybrid Supercapacitor with Water‐in‐Salt Hydrogel Electrolyte and N/P‐Dual Doped Graphene Hydrogel Electrodes

Wearable Solid-State Supercapacitors Operating at High Working Voltage with a Flexible Nanocomposite Electrode

Wearable fabric supercapacitors based on CNTs and polyhedral ZnO with a wide potential window

Water-in-Salt Ambipolar Redox Electrolyte Extraordinarily Boosting High Pseudocapacitive Performance of Micro-supercapacitors

Flexible Zinc-Ion Hybrid Supercapacitor with High Areal Capacitance Based on a Redox Iodide Ion Electrolyte and High Mass Loading Cathode

Graphene Nanoribbons Enhancing the Electronic Conductivity and Ionic Diffusion of Graphene Electrodes for High‐Performance Microsupercapacitors

Nanostructured Co3O4 Asymmetrically Deposited on a Single Carbon Cloth for an All-Solid-State Integrated Hybrid Device with Reversible Zinc-Air High-Energy Conversion and Asymmetric Supercapacitive High-Power Delivery

All‐Solid‐State Planar Sodium‐Ion Microcapacitors with Multidirectional Fast Ion Diffusion Pathways

“Sweat-chargeable” on-skin supercapacitors for practical wearable energy applications

On-chip Interdigitated Supercapacitor Based on Nano-Porous Gold/manganese Oxide Nanowires Hybrid Electrode