Abstract:A redistribution of stress is caused by the excavation of a new tunnel within the soil surrounding the existing shield tunnel structure. This stress redistribution results in alterations to the soil and water loads around the existing tunnel structure, ultimately impacting its stress and deformation. The deformation response of existing tunnels is primarily focused on in most existing studies, with limited research conducted on the coupling system of new tunnel excavation, soil stress state, and deformation and stress of existing tunnels. This paper proposed an innovative methodology to predict deformation in existing tunnel structures and estimate additional stress during the excavation of a new shield tunnel. The reliability of the suggested calculation method was verified using measured internal force and convergence data of the structures. The results demonstrated that the Long Short-Term Memory (LSTM) model could more effectively establish the temporal correlation between the excavation parameters of new tunnels and the deformation of existing tunnels. Compared to the Recurrent Neural Network (RNN) model, the R2 of the LSTM model increased by 11.81% in the prediction of the tunnel waist and 9.38% in the prediction of the tunnel crown. The Light gradient boosting machine (LightGBM) algorithm was used to analyze the crucial factors of deformation of the existing tunnel structures during shield tunneling, and the results showed that the relative position and the average earth pressure were the essential factors. Furthermore, a calculation method for the additional stress of existing tunnel structures was proposed based on the load structure model. The method assumed that the additional load was distributed rectangularly at the top and bottom of the existing tunnel, and triangularly at the waist of the tunnel. The comparison between the calculated results and the measured results indicated that the phased characteristics of the internal force changes in the existing tunnel structure during the construction of a new tunnel could be accurately reflected by this method.

Attitude deviation prediction of shield tunneling machine using Time-Aware LSTM networks

Attention-based LSTM predictive model for the attitude and position of shield machine in tunneling

Prediction of shield tunneling attitude: A hybrid deep learning approach considering feature temporal attention

Dynamic prediction for attitude and position of shield machine in tunneling: A hybrid deep learning method considering dual attention

Optimal Decision-making System of Shield Tunneling Parameters Based on LSTM and MNSGA-II

LSTM-based Deformation Forecasting for Additional Stress Estimation of Existing Tunnel Structure Induced by Adjacent Shield Tunneling

Shield machine position prediction and anomaly detection during tunnelling in loess region using ensemble and deep learning algorithms

Real-time prediction of shield moving trajectory during tunnelling

Prediction of shield machine posture using the GRU algorithm with adaptive boosting: A case study of Chengdu Subway project

Intelligent real-time prediction of multi-region thrust of EPB shield machine based on SSA-LSTM

Prediction of Shield Machine Attitude Based on Various Artificial Intelligence Technologies

Deep learning analysis for energy consumption of shield tunneling machine drive system

Construction and Application of LSTM-Based Prediction Model for Tunnel Surrounding Rock Deformation

A hybrid deep learning approach for dynamic attitude and position prediction in tunnel construction considering spatio-temporal patterns

Real-time prediction of mechanical behaviors of underwater shield tunnel structure using machine learning method based on structural health monitoring data

Prediction of Axis Attitude Deviation and Deviation Correction Method Based on Data Driven During Shield Tunneling

TBM performance prediction using LSTM-based hybrid neural network model: Case study of Baimang River tunnel project in Shenzhen, China

Influence of adjacent shield tunneling construction on existing tunnel settlement: field monitoring and intelligent prediction

A VMD-EWT-LSTM-based multi-step prediction approach for shield tunneling machine cutterhead torque

Multi-step intelligent prediction of shield machine position attitude on the basis of BWO-CNN-LSTM-GRU