Abstract:Research nuclear reactors are critical to the development of nuclear technology, but because of the complex configuration of the fuel assemblies and the different initial operating conditions, neutronic and thermal–hydraulic analyzes are performed with dedicated or adapted codes. These simulation tools might not be as accurate, since they use simple resolution methods and assumptions that do not always capture all aspects of the behavior of a nuclear research reactor. On the other hand, as time goes by, the evolution of numerical tools for the core analysis of power reactors have experienced a considerable progress. Nowadays, pin/subchannel level analysis of the core with coupled codes based on transport (SP3, MOC, SN, etc.) or Monte Carlo methods are applied in addition to the nodal diffusion codes. Hence, the research community is adapting and validating selected high-fidelity tools developed for power reactors to perform detail core analysis of e.g. Material Testing Reactors (MTR) cores at plate and subchannel level. This work deals with the validation of the high-fidelity coupled Serpent2/Subchanflow, which was modified and extended for the plate/subchannel analysis of MTR-cores, using the data of rod ejection tests performed in the SPERT IV D-12/25 reactor, especially the tests B-34 and B-35 were selected to validate the dynamic capability of Serpent2/Subchanflow. In these unique tests, experimental data e.g. thermal neutron flux, core power evolution during the rod ejection tests, and the plate cladding temperature was measured. It is noted that, due to the lack of detailed information on the initial conditions, the extraction and introduction scenarios of the transient rod for the reactivity insertion required calibrations and assumptions regarding velocity and position. The comparison of selected parameters predicted by the coupled simulations at plate/subchannel level of the SPERT IV reactor with the measured data at static and transient conditions shows excellent agreement confirming the high accuracy appropriateness of the used code for the analysis of research reactors. The calculated values of thermal neutron flux and core power evolution have a statistical error of ± 2 sigma. It was also found that the maximum temperature difference between calculated and experimental values is 7 °C and ∼ 10 °C for tests B-34 and B-35, respectively. In addition, the coupled code predicts for the first time the temperature of each plate and subchannel considering the local feedbacks between neutronics and thermal-hydraulics allowing the identification of the hottest/coldest plate in the core. The high-fidelity validation tool can provide comparison solutions for current research reactor core analysis methods, such as core analysis with point kinetics or 3D nodal diffusion codes coupled with fuel assembly-level thermal-hydraulics.

Numerical simulation of plutonium measurements using an active well coincidence counter (AWCC)

AWCC Simulations Based on Monte Carlo Code RMC

Depletion calculation of subcritical system with consideration of spontaneous fission reaction

Study of coincidence summing effect using Monte Carlo simulation to improve large samples measurement for environmental applications

Simulation of Neutron Multiplicity Counting Based on Monte Carlo Code RMC

Integral experiments with a cylindrical multiplying system of metal plutonium

Variance Analysis for Passive Neutron Multiplicity Counting

Fast neutron coincidence counter using scintillators for safeguards verification of the TRU/RE waste

Calculation of response parameters for a neutron long counter instrument

Fissile Material Detection using Neutron Coincidence Counters

Monte Carlo Simulation of a PhosWatch Detector Using Geant4 for Xenon Isotope Beta–gamma Coincidence Spectrum Profile and Detection Efficiency Calculations

Neutron Measurements and Monte Carlo Simulations of Spent Nuclear Fuel in Dry Cask Storage Using a New Remote Monitoring System Prototype

Non-destructive assay of plutonium in absence of gamma-ray spectrometry

Towards a Realistic Monte Carlo Simulation of the MPD Detector at NICA

Feasibility of Neutron Coincidence Counting for Spent Fuel

Optimised neutron yield calculations from ($α,n$) reactions with the modified SOURCES4 code

Monte Carlo modelling for the in vivo lung monitoring of enriched uranium: Results of an international comparison

Validation of the dynamic simulation capabilities of Serpent2/Subchanflow using experimental data from the research reactor SPERT IV D-12/25

Simulation of neutrons produced by high-energy muons underground

Subroutines to Simulate Fission Neutrons for Monte Carlo Transport Codes

Monte Carlo Simulations of Trapped Ultracold Neutrons in the UCNτ Experiment