Abstract:Today, innovative coatings must ensure wear protection and corrosion resistance for engineering materials with high corrosion susceptibility, e.g. mild steels, as well as the current sustainability criteria in terms of environment protection and health.PVD technology fulfils most of these demands, but unfortunately, the corrosion protection performance is unsatisfactory due to the typically low coating thicknesses of only few micrometres.One solution to overcome the corrosion problem are TiMgREN (RE = Rare Earth) based coatings, which were developed by the authors. Even with 5 μm thick monolithic TiMgGdN coatings a corrosion resistance of at least 800 h could be achieved in the salt spray test without any macroscopic corrosion attack.In the present work, the influence of the coating composition, the substrate material and the surface roughness on the corrosion properties was examined. Besides, the application of Gd as alloying element, the influence and the effect of other rare earth metals (La, Ce) on the corrosion performance were investigated.As benchmark, the TiMgGdN coatings were compared with industrial standard PVD coatings, DLC and electroplated Cr regarding the corrosion and the wear performance.The coatings were characterized concerning their microstructural, mechanical and chemical properties. Salt spray tests as well as electrochemical measurements were carried out to examine the corrosion properties of the coated specimens. Furthermore, ball on disk wear tests were conducted by reciprocal dry sling tests by using a SRV 3 tribometer.It was shown that by variation of the deposition parameters, the coating properties could be improved concerning both, corrosion and wear performance. Furthermore, the effect of the used rare earth metal type and the rare earth metal content on the coating properties was investigated. The TiMgGdN coatings exhibit superior corrosion properties in comparison to the industrial standard coatings.

Research on the Tribological Properties of a New Generation of Multi-Layer Nanostructured PVD Coatings for Increasing the Technological Lifetime of Moulds

Study of PVD-Coated Inserts' Lifetime in High-Pressure Die Casting Regarding the Requirements for Surface Quality of Castings

Laboratory Testing to Characterize the Use of PVD Coatings and Alternate Die Materials for Reducing Soldering and Erosion for Aluminum Die Casting Applications

Experimental Investigation of the Wear Behaviour of Coated Polymer Gears

Surface integrity of machined AISI D2 steel and its effect on the adhesion of a PVD-AlCrN coating

Hard Protective Layers on Forging Dies—Development and Applications

Wear resistance of PVD coatings in plastics processing

The Effect of DLC Surface Coatings on Microabrasive Wear of Ti-22Nb-6Zr Obtained by Powder Metallurgy

PVD coating strategies: Developing a combination of AlCrN and AlTiSiN for enhanced surface performance during threading of super duplex stainless steel

Mold protective coatings for precision glass molding

Surface Wettability and Tribological Performance of Ni-based Nanocomposite Moulds against Polymer Materials

Surface Roughness Influence on Tribological Behavior of HiPIMS DLC Coatings

Evaluation of wear mechanisms of PVD and CVD coatings deposited on cemented carbide substrates applied to hard turning

Advanced Tribological Characterization of DLC Coatings Produced by Ne-HiPIMS for the Application on the Piston Rings of Internal Combustion Engines

State-of-the-Art Developments in Advanced Hard Ceramic Coatings Using PVD Techniques for High-Temperature Tribological Applications

Evaluation of mechanical properties and tribological behavior of DLC/WC/WCN/W multilayer coatings deposited by HiPIMS

Corrosion and wear protection of mild steel substrates by innovative PVD coatings

Effect of Microstructure and Hardness on Cavitation Erosion and Dry Sliding Wear of HVOF Deposited CoNiCrAlY, NiCoCrAlY and NiCrMoNbTa Coatings

Final surface modification for better wear resistance of ceramic coating on cast AlSi10Mg alloy

Effects of Tribological Behavior of DLC Film on Micro-Deep Drawing Processes

Wear behaviours of PVD-TiN coating onTi-6Al-4V alloy processed by laser powder bed fusion or conventionally processed