Abstract:Piezoelectric Energy Harvesters (PEH) are usually used to convert mechanical energy (vibration, shocks) into electrical energy, in order to supply energy-autonomous sensor nodes in industrial, biomedical or domotic applications. Non-linear extraction strategies such as Synchronous Electrical Charge Extraction (SECE) [1-2], energy investing [3] or Synchronized Switch Harvesting on Inductor (SSHI) [4] have been developed to maximize the extracted energy from harmonic excitations. However, in most of today's applications, vibrations are not periodic and mechanical shocks occur at unpredictable rates [4]. SSHI interfaces naturally seemed to be the most appropriate candidate for harvesting shocks as they exhibit outstanding performance in periodic excitations [4]. However, the SSHI strategy presents inherent weaknesses while harvesting shocks, since the invested energy stored in the piezoelectric capacitance cannot be recovered. In this work, we propose a self-starting, battery-less, 0.55mm 2 integrated energy harvesting interface based on SECE strategy which has been optimized to work under shock stimulus. Due to the sporadic nature of mechanical shocks which imply long periods of inactivity and brief energy peaks, the interface's average consumption is optimized by minimizing the quiescent power. A dedicated energy saving sequencing has thus been designed, reducing the static current to 30nA and enabling energy to be extracted with only one single 8$\mu$J shock occurring every 100s. Our SECE-based circuit features a shock FoM 1.6x greater than previous SSHI-based interfaces [4]. The proposed system depicted in Fig.1 is made of a negative voltage converter rectifying the PEH output voltage, and a SECE power path controlled by a sequenced circuit. The sequencing is divided in 4 phases and the associated time diagrams are illustrated in Fig.2. During the sleeping mode T1, all blocks except the shock detection (SD) are turned off. During the starting phase, the energy is stored in CASIC through a cold-start path, increasing VASIC. This will progressively turn on the SD. Next, when stress applied to the piezoelectric material leads to an increase in VREC, the SD checks if the electrical energy

Short Circuit Synchronized Electric Charge Extraction (SC-SECE): a tunable interface for wideband vibration energy harvesting

A unified N-SECE strategy for highly coupled piezoelectric energy scavengers

A Self-Sensing Synchronous Electric Charge Extraction (Sece) Solution For Piezoelectric Energy Harvesting Enhancement

Fully Integrated Frequency-Tuning Switched-Capacitor Rectifier for Piezoelectric Energy Harvesting.

A Shock-Optimized SECE Integrated Circuit

Self-powered synchronous asymmetric voltage flip and charge extraction technique for piezoelectric energy harvesting

A Self-Powered Synchronous Switch Energy Extraction Circuit for Electromagnetic Energy Harvesting Enhancement

A Fully Integrated Split-Electrode SSHC Rectifier for Piezoelectric Energy Harvesting

A single‐inductor self‐powered SECE interface circuit for dynamic load multi‐PZTs energy harvesting

A 30nA Quiescent 80nW to 14mW Power Range Shock-Optimized SECE-based Piezoelectric Harvesting Interface with 420% Harvested Energy Improvement

Mechanical Rectifier for Broadband Piezoelectric Vibration Energy Harvesting and Self-Adapting Synchronous Electric Charge Extraction

Vibration energy harvesting based on a piezoelectric nonlinear energy sink with synchronized charge extraction interface circuit

A Multi-step Charge Extractions and Voltage Bias-flip (MCEBF) Interface Circuit for Piezoelectric Energy Harvesting Enhancement

Transient response of a nonlinear energy sink based piezoelectric vibration energy harvester coupled to a synchronized charge extraction interface

A Frequency Up-Conversion Piezoelectric Energy Harvester Shunted to a Synchronous Electric Charge Extraction Circuit

Multiple Charge Extractions with Bias-Flip Interface Circuit for Piezoelectric Energy Harvesting

Phase Shifted Multi-Input Sece for Power Enhancement in Strongly-Coupled Piezoelectric Transducers

A comparative study of electrical interfaces for tunable piezoelectric vibration energy harvesting

A Multiple Charge Extractions and Multiple Precharge Interface Circuit for Piezoelectric Energy Harvesting.

Bias-Voltage-SSHI Interface Circuit for Strong Coupling Piezoelectric Energy Systems

Synchronized switch charge constrained conditioning circuit for electrostatic energy harvesting