Abstract:An active microwave imaging system for non-invasive temperature sensing has been developed and evaluated. The system is designed to assess biological tissues undergoing thermal therapy. This paper presents results that demonstrate the imaging capabilities of the microwave method using simulated and experimental phantom materials. Results from both numerical studies and laboratory experiments have been analysed and are presented. The imaging system uses a 16 channel fixed monopole array transceiver unit operating over a bandwidth of 300-900 MHz. The annular array diameter is 14.75 cm and is immersed in a 0.9% saline solution. Standard heterodyning principles are used for signal detection leading to a dynamic range of the system of better than 115dB. Image formation is accomplished with a 2-D finite element based, near-field iterative technique. This allows the simultaneous reconstruction of both the real and imaginary components of the dielectric property distribution in tissue equivalent phantoms. Data acquisition currently captures 144 complex field measurements per image. Image reconstruction requires approximately 2 min per iteration with a typical convergence in less than 10 steps. Experiments performed to evaluate the temperature dependence of biological phantoms (saline with variable salt concentrations) are described. The numerical accuracy and precision of the reconstruction algorithm based upon these phantom studies are presented. Simple laboratory models of localized hyperthermia have been used to evaluate the experimental accuracy and precision of the imaging system. A numerical precision of 0.02 degrees C and an accuracy of 0.37 degrees C have been observed with the current algorithm. In laboratory experiments, images have been reconstructed at different target temperatures and target saline concentrations. The effect of placing high contrast biological phantoms (i.e. bone/fat simulants) along with the heated objects have also been studied. Localized heating of the biological phantom is achieved by pumping a saline solution of pre-selected concentration through enclosed ends of hollow dielectric cylinders having approximately 5cm inner diameter and 4 mm wall thickness. The temperature of the heated zone is preset and maintained to +/-0.2 degrees C by an external heater and circulator. The results currently show that a maximum temperature precision of 0.98 degrees C and maximum relative accuracy of 0.56 degrees C has been achieved in the laboratory using the current generation of the prototype system.

Towards Core Body Temperature Measurement via Close Proximity Radiometric Sensing

An Efficient Temperature Calibration Method Based on the Improved Infrared Forward Model and Bayesian Inference

A Novel Miniaturized Sandwich-Like Sensor for Continuous Measurement of Core Body Temperature

Theoretical and Experimental Studies of Epidermal Heat Flux Sensors for Measurements of Core Body Temperature.

Noninvasive Temperature Measurements in Tissue-Simulating Phantoms Using a Solid-State Near-Infrared Sensor

Simulation Study of Full Passive Magnetic Human Body Communication in 65-nm CMOS Technology for Temperature Sensing Application

Design and Implementation of Multiband Noncontact Temperature-Measuring Microwave Radiometer

Thermal analysis of ultrathin, compliant sensors for characterization of the human skin

Core Body Temperature Estimation Model with Thermal Contact Resistance Compensation

Study of a Miniaturized Sandwich-Like CBT Monitoring Sensor

Research on the Best Measurement Situation Between Optical Probe and Tissue Surfaces in Non-Invasive Detection.

Toward an Accurate IR Remote Sensing of Body Temperature Radiometer Based on a Novel IR Sensing System Dubbed Digital TMOS

Ultrathin Conformal Devices for Precise and Continuous Thermal Characterization of Human Skin

Optimization of a Wearable Device for Core Body Temperature Monitoring Based on the Dual-Heat-Flux Model

Wearable Personal Core Body Temperature Measurement Considering Individual Differences and Dynamic Tissue Blood Perfusion

Development of an improved wearable device for core body temperature monitoring based on the dual heat flux principle.

Design and Implementation of a Novel Interferometric Microwave Radiometer for Human Body Temperature Measurement

Non-invasive thermal assessment of tissue phantoms using an active near field microwave imaging technique

Nanothermometer for In Vivo Temperature Detection with High Spatial Resolution Based on Core–Shell Rare Earth Nanoparticles

Improvement of Environmental Robustness in Non-invasive Core Body Temperature Sensor Studied Numerically and Experimentally

Non-contact infrared assessment of human body temperature: The journal Temperature toolbox