Abstract:Research on laser-liquid interaction and its induced fluid flows, as well as microbubbles, is important in many applications, such as laser ophthalmic microsurgery, manufacturing and repairing of micro-electronic-mechanical devices, laser deposition of thin liquid film to a specific location in micro system, etc. This work was focused on the interaction mechanisms of a laser pulse with distilled/degassed water as well as the characteristics of the microbubbles. Microbubbles and optohydrodynamic flows induced by a Nd:YAG pulse laser (New Wave Research) were studied. A recently improved PIV and PDA system were used to analyze the bubble dynamics and fluid flow quantitatively. Two CCD cameras were used to capture the images of microbubbles and visualize the laser induced Optohydrodynamic flows. The experimental results show that a bright fluid beam (density flow) with duration less than 127μs is produced by a focused laser pulse while an explosive cavitation just around the focus point is also occurred. Immediately following the fluid beam and the explosive cavitation, two new fluid regions which may be formed with the superheated dense fluid were found. One of them is just under the fluid beam due to the optical pressure while the other one is around the explosion area due to the force caused by the explosive cavitation. As shown in Figure 1, Single and multi microbubbles were generated immediately after the cavitation explosion when the nucleation conditions were satisfied. In addition, the characteristics, such as bubble velocities and diameters, were measured by a recently improved phase-Doppler anemometry (PDA). These results will help to have a better understanding of the mechanisms of laser-induced optohydrodynamic flows and bubbles related phenomena, which is crucial to numerical modeling. Figure 1 Micro bubble generation-induced by a 30 mJ laser pulse; (a) first frame after the pulse shot (t=0ms), (a) A

Study of gas-fluidization dynamics with laser-polarized 129Xe

Applications of controlled-flow laser-polarized xenon gas to porous and granular media study

Gas flow patterns in a granular fluidized bed

Noninvasive measurements of gas exchange in a three-dimensional fluidized bed using hyperpolarized 129Xe NMR

Bubble Characterization in the Gas-Solid Fluidized Bed Using an Intrusive Acoustic Emission Sensor Array

Particle Motion in Two‐ and Three‐Phase Fluidized‐Bed Reactors Determined by Pulsed Field Gradient Nuclear Magnetic Resonance

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

Diffusion NMR Methods Applied to Xenon Gas for Materials Study

Gas Uptake and Thermodynamics in Porous Liquids Elucidated by 129 Xe NMR

Longitudinal Relaxation and Diffusion Measurements Using Magnetic Resonance Signals from Laser-Hyperpolarized129Xe Nuclei

Hyperpolarized Xe-129 NMR and Its Applications in Characterization of Porous Catalytic Materials

Optical hyperpolarization and NMR detection of $^{129}$Xe on a microfluidic chip

Longitudinal Relaxation And Diffusion Measurements Using Magnetic Resonance Signals From Laser-Hyperpolarized Xe-129 Nuclei

Multiphase imaging of gas flow in a nanoporous material using remote-detection NMR

MR Imaging with Hyperpolarized Noble Gases of Lung

Integrated Stopped-Flow Device for the Study of Porous Materials Using Hyperpolarized 129 Xe NMR

X-ray tomography analysis of bubbles and slugs in a fluidized bed with inter-particle force

Investigations of the properties of filaments generated in gas mixtures pumped by femtosecond laser pulses

Measurements of Electron Transport in Liquid and Gas Xenon Using a Laser-Driven Photocathode

Experimental Studies of Laser-Induced Hydrodynamics and Bubbles by PIV and PDA

Numerical and Experimental Study of Supersonically Expanding Argon Plasma Using a Micrometer Hollow Cathode Discharge