Abstract:To address the challenges associated with achieving high-fidelity printing of complex 3D bionic models, this paper proposes a method for spatially resolved defect characterization and fidelity assessment. This approach is based on 3D printer-associated optical coherence tomography (3D P-OCT) and GCode information. This method generates a defect characterization map by comparing and analyzing the target model map from GCode information and the reconstructed model map from 3D P-OCT. The defect characterization map enables the detection of defects such as material accumulation, filament breakage and under-extrusion within the print path, as well as stringing outside the print path. The defect characterization map is also used for defect visualization, fidelity assessment and filament breakage repair during secondary printing. Finally, the proposed method is validated on different bionic models, printing paths and materials. The fidelity of the multilayer HAP scaffold with gradient spacing increased from 0.8398 to 0.9048 after the repair of filament breakage defects. At the same time, the over-extrusion defects on the nostril and along the high-curvature contours of the nose model were effectively detected. In addition, the finite element analysis results verified that the 60-degree filling model is superior to the 90-degree filling model in terms of mechanical strength, which is consistent with the defect detection results. The results confirm that the proposed method based on 3D P-OCT and GCode can achieve spatially resolved defect characterization and fidelity assessment in situ, facilitating defect visualization and filament breakage repair. Ultimately, this enables high-fidelity printing, encompassing both shape and function.

What problem does this paper attempt to address?

The paper primarily addresses the challenges in the 3D bioprinting process, particularly the issue of high-fidelity printing of complex 3D bionic models. It proposes a spatially resolved defect characterization and fidelity evaluation method based on 3D Printing-Associated Optical Coherence Tomography (3D P-OCT) and GCode information. Specifically, the research methods in the paper include the following aspects: 1. **Background Introduction**: 3D printing technology is widely used in medical, aerospace, and educational fields, but it still faces many challenges in complex 3D bioprinting, such as printing defects and low structural fidelity. 2. **Research Objectives**: To address the above issues, this study aims to develop a method that can achieve spatially resolved defect characterization and fidelity evaluation to improve the quality and stability of 3D printing. 3. **Methodology**: - **3D P-OCT System**: A self-developed 3D P-OCT system is used, integrating a 3D bioprinter with optical coherence tomography technology for real-time monitoring of the printing process. - **GCode Information Utilization**: Target model images are generated based on GCode information and compared with the actual printing results for analysis. - **Defect Characterization Map**: By comparing the target model images and reconstructed model images, a defect characterization map is generated to achieve defect detection, visualization, and fidelity evaluation. - **Repair Strategy**: Based on the information provided by the defect characterization map, secondary printing instructions are automatically generated to repair defects such as filament breakage. 4. **Validation Experiments**: The effectiveness of the method is validated through experiments with different models (such as multi-layer gradient-spaced hydroxyapatite scaffolds, nose models, and ear models), printing paths, and materials (such as hydroxyapatite HAP, silicone, and polycaprolactone PCL). 5. **Results Presentation**: The results show that after repairing the filament breakage defect, the fidelity of the multi-layer hydroxyapatite scaffold increased from 0.8398 to 0.9048. Additionally, over-extrusion defects at the nostrils of the nose model and along the high-curvature contours were effectively detected. In summary, the method proposed in this study can effectively address defect issues in the 3D bioprinting process, improving the fidelity and functionality of printed structures, and is of great significance for advancing 3D bioprinting technology.

Spatially Resolved Defect Characterization and Fidelity Assessment for Complex and Arbitrary Irregular 3D Printing Based on 3D P-OCT and GCode

In situ defect detection and feedback control with three-dimensional extrusion-based bioprinter-associated optical coherence tomography

Visual Detection of Surface Defects Based on Self-Feature Comparison in Robot 3-D Printing

Automatic Design and Fabrication of a Custom Ocular Prosthesis Using 3D Volume Difference Reconstruction (VDR)

Online Quality Monitoring in Material Extrusion Additive Manufacturing Processes Based on Laser Scanning Technology

Multi-view Online Vision Detection Based on Robot Fused Deposit Modeling 3D Printing Technology

Signal-Decay Based Approach for Visualization of Buried Defects in 3-D Printed Ceramic Components Imaged with Help of Optical Coherence Tomography

Exceptional mechanical performance by spatial printing with continuous fiber: Curved slicing, toolpath generation and physical verification

Anatomic modeling using 3D printing: quality assurance and optimization

Deformation Monitoring and Stress Distribution Prediction of 3D-Printed Hydroxyapatite Scaffolds

Automated structural repair based on continuous carbon fiber reinforced plastic 3D printing and online model reconstruction

Design and implementation of three-dimensional model for medical image of bone defect

Direct Three-Dimensional Printing of a Highly Customized Freestanding Hyperelastic Bioscaffold for Complex Craniomaxillofacial Reconstruction

Research on Design and Performance of High-Performance Porous Structure Based on 3D Printing Technology

An Accurate Finite Element Approach for Programming 4D-Printed Self-Morphing Structures Produced by Fused Deposition Modeling

In situ repair of bone and cartilage defects using 3D scanning and 3D printing

Conformal 3D Printing Algorithm for Surfaces and Its In Situ Repair Applications

Parameter optimization for accurate and repeatable strut width in the 3D printing of composite bone scaffolds

Validation of an Open-Sourced Strain Analysis Code to Assess Fragility in 3D-Printed Porous Structures Designed for Low-Rigidity Medical Implants

Defect Localization Using Region of Interest and Histogram-Based Enhancement Approaches in 3D-Printing

Quality Control Approach of 3D Printing Products Combining 3D Model and Computer Vision