Abstract:Abstract In order to study the safe distance between twin-parachute during their inflation process for fighter ejection escape, the fighter was equipped with two canopies and two seats, two types of parachute were used to numerically simulate their inflation process, respectively. One of them is C-9, the other a slot-parachute (S-P). Their physical models were built, then the meshes inside and around both parachutes were generated for fluid-structure interaction (FSI) simulation. The penalty function and the arbitrary Lagrangian-Eulerian (ALE) method were employed in the FSI simulation. To validate the numerical model for FSI simulation, at first the single parachute of the twin-parachute was used for the FSI simulation, the predicted inflation times for both types of parachute were compared with the experimental data. The computed results are in good agreement with experimental data. As a result, the inflation times were predicted with twin-parachute for both kinds of parachute. On the basis of the locations of ejected seats after the separation of seat and pilot, the initial locations and orientations of twin-parachute were also obtained. The numerical simulations for both kinds of parachute were performed by the FSI method, respectively. Our results illustrate that when the interval time for two seats ejected is greater than 0.25s, two pilots attached the twin-parachute are safe, and the twin-parachute would not interfere each other. Moreover, our results also indicate that the FSI simulation for twin-parachute inflation process is feasible for engineering applications and have a great potential for wide use.

Numerical study on ring slot parachute finite mass inflation process and wake recontact phenomenon

Numerical investigation of ram-air parachutes inflation with fluid-structure interaction method in wind environments

Research on the inflation process of underwater parachute by numerical simulation and model test

Numerical study of parachute inflation process based on smoothed particle hydrodynamics fluid structure interaction method

Aerodynamic simulation and analysis of large ring-sail parachute

Numerical Simulation of Parachute Inflation: A Methodological Review

Inflation Performance Study of a Rescue Parachute with Circle Gap

Numerical Simulation of Twin-Parachute Inflation Process for Aircraft Ejection Escape

Numerical analysis and experimental study on deployment process of coil-folded inflatable tube

Numerical Study on Aerodynamic Performance of Mars Parachute Models with Geometric Porosities

Fluid-Structure Interaction Simulation and Accurate Dynamic Modeling of Parachute Warhead System Based on Impact Point Prediction

Drape and Inflatable Mechanics of Membrane Inflatable Structure

Numerical Study on the Influence of Lateral Wind Field Effect on Parachute Condition

The Effect of Reefing Time on the Damage Process of the Supersonic Parachute

Numerical Simulation of Parachute Working Process Based on Finite Element Mesh Reconstruction

Fluid structure interaction of supersonic parachute with material failure

Numerical Simulation of Parafoil Inflation Via a Robin–Neumann Transmission-Based Approach

New general correlations for opening shock factor of ram-air parachute airdrop system

Numerical Study of Parachute Spreading Process Based on SPH Method

NUMERICAL STUDIES ON THE PROPULSION AND WAKE STRUCTURES OF FINITE-SPAN FLAPPING WINGS WITH DIFFERENT ASPECT RATIOS

STUDY OF THE FABRIC PERMEABILITY EFFECT ON PARACHUTE DROPPING BASED ON ALE METHOD