Abstract:Different symmetry phases are identified in PbZr0.6Ti0.4O3 ferroelectric thin films as function of the strain introduced by CaF2, SrTiO3 and PMN‐PT substrates. Measured strain‐temperature paths are successfully described by a multi‐domain LGD‐model that predicts the symmetry phases and phase transitions, and the observed enhanced piezoelectricity in one of the phases. Lead based bulk piezoelectric materials, e.g., PbZrxTi1‐xO3 (PZT), are widely used in electromechanical applications, sensors, and transducers, for which optimally performing thin films are needed. The results of a multi‐domain Landau–Ginzberg‐Devonshire model applicable to clamped ferroelectric thin films are used to predict the lattice symmetry and properties of clamped PZT thin films on different substrates. Guided by the thermal strain phase diagrams that are produced by this model, experimentally structural transitions are observed. These can be related to changes of the piezoelectric properties in PZT(x = 0.6) thin films that are grown on CaF2, SrTiO3 (STO) and 70% PbMg1/3Nb2/3O3‐30% PbTiO3 (PMN‐PT) substrates by pulsed laser deposition. Through temperature en field dependent in situ X‐ray reciprocal space mapping (RSMs) and piezoelectric force microscopy (PFM), the low symmetry monoclinic phase and polarization rotation are observed in the film on STO and can be linked to the measured enhanced properties. The study identifies a monoclinic ‐rhombohedral MC‐MA‐R crystal symmetry path as the polarization rotation mechanism. The films on CaF2 and PMN‐PT remain in the same symmetry phase up to the ferroelectric‐paraelectric phase transition, as predicted. These results support the validity of the multi‐domain model which provides the possibility to predict the behavior of clamped, piezoelectric PZT thin films, and design films with enhanced properties.

Room temperature surface piezoelectricity in SrTiO3 ceramics via piezoresponse force microscopy

Piezoelectric And Strain Properties Of Ba(Ti1-Xzrx)O-3 Ceramics

Strain gradient induced polarization in SrTiO3 single crystals

The influence of the local oxygen vacancy concentration on the piezoresponse of strontium titanate thin films

Inspecting Piezoelectricity in PbZr1−x Ti X O3 Single Crystals with Ferroelastic Domains

Field-induced Piezoelectric Response in Pb(Mg1/3Nb2/3)O3–PbTiO3 Single Crystals

Grain size effect of the flexoelectric response in BaTiO3 ceramics

Polarization Alignment, Phase Transition, and Piezoelectricity Development in Polycrystalline0.5ba(zr0.2ti0.8)o3

Crystallographic Orientation and Surface Charge-Tailored Continuous Polarization Rotation State in Epitaxially Ferroelectric Nanostructures

Piezoelectric nonlinearity and frequency dispersion of the direct piezoelectric response of BiFeO3 ceramics

Piezoresponse Force Microscopy Studies of Domain in Ba1-Xsrxtio3 Ceramics

Piezoelectric Strain in Lead Zirconate Titante Ceramics As a Function of Electric Field, Frequency, and Dc Bias

Temperature independent shear piezoelectric response in relaxor-PbTiO(3) based crystals.

Dielectric And Piezoelectric Properties Of Pb(Zn1/3nb2/3)O-3-Pbtio3 Single Crystals

Enhanced Piezoelectricity by Polarization Rotation through Thermal Strain Manipulation in PbZr0.6Ti0.4O3 Thin Films

Electric-field-induced strain and piezoelectric properties of a high Curie temperature Pb(In1/2Nb1/2)O3–PbTiO3 single crystal

Piezoelectric Modulation of Nonlinear Optical Response in BaTiO3 Thin Film

Domain Evolution of Tetragonal Pb(ZrxTi1−x) O3 Piezoelectric Thin Films on SrTiO3 (100) Surfaces: Combined Effects of Misfit Strain and Zr/Ti Ratio

Electromechanical Response from LaAlO3/SrTiO3 Heterostructures

Deconvolved Intrinsic and Extrinsic Contributions to Electrostrain in High Performance, Nb-doped Pb(Zr Ti1-)O3 Piezoceramics (0.50 ≤ X ≤ 0.56)

Piezoresponse Force Microscopy Studies on the Domain Structures and Local Switching Behavior of Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 Single Crystals